About quality and texture - The megaphone full exhaust from Moriwaki is made from stainless steel with a high polished finish, the quality from the overall fit and finish is perfect.About the feeling of use - The megaphone full exhaust has everything going for it, with improved performance and an exhaust sound that compliments the single cylinder engine but my favourite part is the look from the style of the short muffler.Products to buy together - A key product to purchase to further improve the look of the Super Cub C125 would be a set of rear shocks that will also improve handling.Difficulty of installation - The installation of the megaphone full exhaust is a simple task that took 1 hour to complete. Some mechanical aptitude and the use of basic hand tools is what is required to secure the muffler to the frame and the exhaust pipe to the engine.Cost performance and comparison with other products - I find the cost of all the products Moriwaki sell to be on par when compared to what most other companies sell their products for and the I find the megaphone full exhaust is no different. About shipping and packaging - With there being a significant cost difference between sea freight and EMS for the megaphone full exhaust , I chose sea freight so I could put the saved money toward additional parts. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

Finalmente doppo un anno di domande e dubbi ho acquistato la marmita MIORAKI che per me è una meraviglia, un bellissimo prodotto come suono profondo rispetto al originale e soprattutto estetica, che dire mi piace molto, racomando il produttore il venditore tuti gente seria che sa fare benissimo il loro lavoro. GRAZIE MILLE MIORAKI GRAZIE MILLE WEBIKE JAPAN View Detail

Awesome exhaust, great sound...chill at lower revs and fattens nicely underload.Really good heat protection including for passenger.Good looking and quality product.View Detail

In 2023 I ordered this exhaust to Europe, Slovakia. I have Honda Rebel 1100 automat. From start I was a bit afraid if it will fit to my bike and how it will sound, I loved (and still love the look) but I was very surpriced by the sound.. It is not loud like other superbikes without silencer do, but sounds really nice, also put some backfire when downgrading manually.. Exhausts came pretty fast, I was also afraid of payment through paypal and if it will come, but it came in like 7 days, really well packed and really nice looking. I was swapping them in original Honda service and the service man told me, that everything fits perfectly, it was like putting there original honda exhaust he said.. I was super satysfied with everything from communication through the email with people from this site and most with final product.. I reccomend these exhaust for everyone, who wants to make their rebel unique.. everywhre I come I get questions about my new exhausts and I am blessing this site and the brand of exhaust.. if everyone would do their job like moriwaki do their exhaust, world would be much nicer place <3.. Love you all guys, can't wait to make my next order.With best regardsM. C. View Detail

About quality and texture, I can confirm that the quality is great and that the material used is stainless steel for the pipe and stainless steel for the muffler, all surfaces come with a polished finish. About the feeling of use, The styling of the muffler was what sold me on the product and I am not disappointed with the exhaust sound either. A positive experience from making the purchase thru to using it on the bike. Products to buy together, This exhaust has also improved the appearance of the bike so a fender eliminator to allow the removal of the next ugly part would be ideal to also add to your cart. Difficulty of installation, I can say the fitment of the exhaust system was very easy due to the small number of mounting points for the exhaust and the easy acess to these mounting points on the bike. Everything from the muffler mount to the exhaust port mount lined up perfectly. Cost performance and comparison with other products, The pricing of the product was great. You receive a full exhaust system that is made using high quality materials and has high quality surface finishes. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

About quality and texture: I am happy with the quality of the stainless steel header pipe and satin stainless steel muffler which is finished with a unique carbon fibre end cap. About the feeling of use: Super lightweight compared to the Honda exhaust which results in a good weight saving. This muffler design is on a larger proportion for the Grom but it manages to create a big bike sound from the little 125cc motor. Products to buy together: Some form of higher flow air filter would also be desirable to purchase along side this full exhaust system, I will be going with an open air intake from Kitaco. Difficulty of installation: The process to install takes about one hour to complete. A new gasket for the forward mounting flange is recommended. Not difficult to do. Cost performance and comparison with other products: Good costing as you are receiving a well designed and manufactured product using quality materials that will help increase performance but there are also other options for much less cost, so browse Webike available exhausts if you have a lower exhaust budget. About shipping and packaging: Sea frieght is my preferred method of shipping due to the lower cost and it is fantastic that it has returned as an option once again so I can put my money toward parts and not high shipping costs. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: A JMCA approved exhaust so it is suited for everyone that needs an exhaust to my legal specifications.View Detail

About quality and texture: I am happy with the quality of the pulley holder from Kitaco made from a steel construction with a PVC coating over the band to help improve it's hold.About the feeling of use: I have used this tool to hold the clutch and flywheel on my Honda Grom when removal of these parts were required for maintenance with great success. The adjustable band makes this tool very versatile for varies sized motorcycle parts.Products to buy together: Some more tooling like a center lock nut wrench would also be desirable to purchase along side the pulley holder so when it comes time to remove the clutch assembly and oil spinner on your Honda Grom you have all the special tooling required to complete the job.Difficulty of installation: The process to install takes a few minutes, place the pulley holder around the part that needs to be held and adjust the band if required. Tighten down the T handle so that the band holder does not allow the part to spin as you undo the fastener securing the part. Not difficult to do.Cost performance and comparison with other products: Good costing as this is a quality made band holder from Kitaco that has with stood numerous usage without failure as compared to the first band hold that I purchased from another site that failed soon after.About shipping and packaging: The faster shipping options are too expensive for myself so I just have to wait for my part to arrive via sea freight. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged.Any concerns, cautions, or advice when purchasing: These band holder are limited to the sized parts they can hold. No smaller the 6cm in diameter and no larger then 12cm in diameter.View Detail

About quality and texture: I am happy with the quality of the titanium exhaust from Over Racing. The muffler is quite compact with a removable baffle inside and made from titanium, while the exhaust piping is very large in diameter at the exhaust port end and just continues to expand all the way up to the muffler connection and is also made from titanium. About the feeling of use: The titanium exhaust is an aggressive looking exhaust on the Grom but the exhaust note is very enjoyable to hear at idle and through the entire RPM range due to the baffling within the short muffler. Products to buy together: Some form of higher flow air filter would also be desirable to purchase alongside this titanium exhaust to help achieve maximum performance. Difficulty of installation: The process to install took about one hour, I was removing an aftermarket exhaust which was very simple as it was just the two nuts at the front and one bolt at the back but the exhaust port gasket was very difficult to remove. Cost performance and comparison with other products: High costing but you are getting a full titanium exhaust system with features to help obtain high performance at a high price as compared to the much cheaper stainless steel version available from Over Racing. About shipping and packaging: Sea frieght is my preferred method of shipping due to the lower cost and it is fantastic that it has returned as an option once again so I can put my money toward parts and not high shipping costs. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: Zero concerns or cautions on this product and the advice is to purchase if you have the money. View Detail

About quality and texture: I am happy with the quality of the sports camshaft from SP Takegawa, wonderful machining throughout and great quality bearings fitted. About the feeling of use: I was looking for a camshaft to make the 125cc engine higher revving which it has and I'm really happy with how it performs on the open road with no real loss of power in the lower RPMs which is ideal for around town. Products to buy together: Some type of fuel controller is needed to be purchase along side the sports camshaft, the SP Takegawa FICON 2 is well suited to this type of performance modification. Difficulty of installation: The process to install takes about half an hour, was an easy job to complete after reading through the Honda service manual directions. Not difficult to do. Cost performance and comparison with other products: High costing, the cheapest high RPM camshaft available here on Webike is the Endurance hi-power camshaft but does not look to have a power curve anywhere near as good. About shipping and packaging: Sea frieght is my preferred method of shipping due to the lower cost and it is fantastic that it has returned as an option once again so I can put my money toward parts and not high shipping costs. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: Webike has many camshaft to choose from and the choice is difficult, much research is required to get as close as possible to your desired performance outcome.View Detail

About quality and texture: I am happy with the quality of the hyper type 1 air cleaner from Hot Lap, the intake pipe is made from stainless steel and the kit includes stainless steel band clamp to secure the silicone hose and a mesh air filter. About the feeling of use: Due to the shaping and polished stainless steel pipe this air intake is the best looking intake for the Monkey 125 and the open area created by removing the Honda air intake now gives the Monkey 125 more of a Z50 look. Products to buy together: An additional filter would also be desirable to purchase along side the hyper type 1 air cleaner, I prefer to vent the crankcase to atomsphere so a filter with an 8mm mount is needed. Difficulty of installation: The process to install takes about three quarters of an hour. Most of that time is taken removing the Honda air intake, the air cleaner slips straight onto the throttle body and the intake air temperature sensor fits into the pipe and connects to the main wiring harness with the included extension harness. Not difficult to do. Cost performance and comparison with other products: high costing but you are getting great quality items included in this kit for a very reasonable price as compared to the Brock’s ram air intake kit which is great quality also but at a much much higher price. About shipping and packaging: Sea frieght is my preferred method of shipping due to the lower cost and it is fantastic that it has returned as an option once again so I can put my money toward parts and not high shipping costs. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: When deciding on an air intake also take into consideration if you will install an oil cooler in the future as not all air intakes are compatible with all high mounted oil coolers due to the available space. View Detail