我的摩托车是YAMAHA TMAX560，我准备给这台摩托车安装尾箱来增加物品的装载能力，这款GIVI的货架设计很合理，安装孔位精准，多个点的支撑让我可以装备更大的尾箱，安装配件比较多，建议去专业的车行进行安装。View Detail

Item is good and solid however shipping took slightly more than a week. other than that pleased with the product would definitely recommend to other fellow ridersView Detail

Time will tell if this is robust, but it's far stronger than my previous one. I was a bit stressed removing the suspension bolt, but the shocks don't instantly fall off as I feared! The holes at the end are for a Monolock case, NOT a Monokey. I installed a Monokey using a standard plate. This did NOT align, so I drilled two more as far forward as possible. I suspect others unofficial ones might work better as they have more holes. It seems stable for me. Important to note is (1) the standard photo for this product is wrong. Look at the second official one... or mine. You get two arms and two bolts. That's it. In short though I think this is a good product that is easy to install. (I have 2009 CB400SF.)View Detail

this is a very good product and fit my yamaha xt1200 super tenere like it come out from the factory. all the screws and brackets fit nicely to the exisiting mounting hole hence no modification needed. installation is so easy. you just need the remove the oem bracket for the top mount, basically 4 screws and install the givi371 bracket. it will fit all monokey givi top box, and i'm using the 58Loutback trekker box. it fit nicely with minimum vibration. overall, good product View Detail

Installation is very simpleWith installation instructions (Japanese version), complete accessories, according to the example of installation with no problems.---安裝很簡單附安裝說明書(日本版本),配件齊全,依範例安裝沒有問題白爛都會了.View Detail

These were purchased for a Suzuki GSX-R750. I did look at other brands but for the price and what I have witnessed from R&G before, we went for these. The part numbers for the GSX-R750 do only fit a couple of models, this you will have to check for yourselves. I got the correct part number from R&G anyway. The cost was reasonable so this was also a great benefit.The shipping courier I went for was EMS fast service. They delivery my orders within 5 days and I have never had it take any longer than that. From Japan to the UK, that's just brilliant. The shipping was also spread out over a few items which meant it was great value.Upon receipt of my order, the outer box was sealed with tape and nothing could escape during transit, not even the gaskets which are flat could be lost.All the item in the box were packed very well and bubble wrap was also added for additional security. Everything was 100% perfect.The material of these bobbins I am not sure of but they really do take the speed of if you have an accident. The aero shape is really retro looking which also adds the curves of the GSX-R750.These Aero bobbins are pretty easy to fit but just do one side at a time and get some support for the engine as when you remove each bolt, there is a small risk that the emgine will also move. Yes, I have mad ethis error myself so do not do the same. ALways take precautions beforehand. If you do not add some support to the engine and it does drop slightly, you will either never get the bolts to grip or you will just strip the threads and possibly mess up the female threads on the engine.Take your time and follow the instructions R&G provide. Saying that, they do not suggest supporting the engine but I always do now.One happy customer, thanks WebikeView Detail

There were a couple of other parts that I wanted to get for my wife's MT09 which will help protect the bike if there is any accident. These are what I decided to get and the added bonus os that not only will they protect the swingarm but you use them to lift the rear wheel with a paddock stand. Dual purpose which is brilliant.I found the correct part numbers by checking R&G website and adding the model of bike. Very pelased to see that Webike also stock them, so purchased them from here instead.The price is roughly what I could get them for locally but I can count of Webike delivering my items on time and without a hitch. The shipping method I chose this time was EMS fast service. It was a very good price as I also had a few other parts in my basket and this cut the shipping down than just buying one or two parts.Everything arrived with me in 5 days. The outer box was sealed and the littel bit of empty space inside the box was filled with buble wrap. All my parts, even the samller ones arrived in perfect condition. The cotton reels came in their own box which was nice and touch so there would be no damage. They have a really smoothed out thread on the bolts which went in smoothly, not notchy or sharp edged. They attach to the mounting points on the swingarm with no issue. The cotton reels themselves are made from a special nylon I believe, don't quote me on that though but they are very similar to the others I have purchased. I tried them with my standard paddock stand and they are a perfect fit, no wobble like some other cotton reels so a very good product all around. Very pleased with the result. Thank you Webike for your hard work.View Detail

These were for a project I have been meaning to finish for a while now. The bars I have on the bike need some decent bar ends and R&G are the place to go for these kind of thing.I was pretty surprised to find that Webike actually stocked these. I found the correct part by using the parts catalou=gue from R&G website and cross referenced with Webike. Super easy really.The price Webike were selling these for are really good value and around the same as can be sourced locally.I always have more parts in my basket ready to place my order. This is because I found that buying multiple items, cuts down on the shipping costs by quite a bit.The courier I use now is EMS fast as they get my parts to me fast, roughly around 4-5 days and this time, it was 5 days total.My order was all packed in a sturdy box and Webike tape all the way around so it is fully sealed. This stops any ingress or egress. Everything arrived in perfect condition and no damage or missing parts were found.These bar ends are a really good piece of kit for your bike. The provide really good protection in case you drop your bike, that the bars do not get scratched up. They also have a weighted part which helps with vibration. The black part is a robust special nylon material that I know does stop mishaps if you do drop the bike or come off. If the bar ends hit the floor then this generally measn, your frame and some other parts do not. I found out recently that you can also buy replacement nylon ends which is a great idea.The silver section is a nice satin brushed finish. They really do add a bit of subtle bling to the bike but this was not my aim, I just wanted something that did what it should,These are what I needed.Very happy with purchase. Thank you Webike for the great service you provide.View Detail

I wanted an upgrade to the oil filler cap for the MT10. Although the stock one does what it should, it is a little bit boring and not really matching the bike in general.I have had other brands before and also Yoshimura and as the Yoshimura one came in a nice slate grey which would go perfect with the matt parts already on the bike.The price that Webike were selling these at was unbelievable, I honestly thought I was seeing teh wrong price. Get in my basket.i do always have more than one part per order as this spreads the cost of shipping throughout the entire order. I chose EMS fast shipping as they have been really good in all my past experience with them. They just get your order to you in quick time. If my memory recalls correctly, it was 5 dsays from placing the order tot he order delivered at my door. Can't get much better than that from Japan to the UK. Very pleasing.ALl the items in my order arrived in 100% perfect condition as expected. This oil filler cap is beautiful. I mean really stunning piece of work. The threaded part is nice and smooth and not a single notchy piece in sight. They have even gone so far as to anodise the entire filler cap, including the threaded. Not many manufacturers do that, they usually just do so far dowm the threads and that's it. Not with this filler cap. The anodising is super clean and even all over. The lettering is super crisp and you can see every single letter, no blurry parts either.All in all, I am a very happy customer. Thank you Webike for providing a great service and excellent products.View Detail

I purchased this as I changed out a stock clutch master cylinder reservoir and wanted something a little newer. This was obviously an essential part. I decided on the smopke colour as it matched the bike better than the clear which was already on the bike.The price was awesome, much cheaper than I have seen elsewhere. The shipping was very reasonable and as this was an additional item with others it worked out very good indeed. When this was delivered to me which took around a week, as always, the packaging was excellent, again, as always. No damage to anything within this order, the outer box was sealed with tape and there was added padding inside so nothing could become damaged in transit.The workmanship of the parts in this kit were flawless. Everything fitted together without a hitch. All that is in the kit is everything you need for the upgrade. The bracket is of good quality aluminium and has a slight flexibility but not much. The bolts are nice and clean. There is even the link pipe which is a nice stiff feel but clearly braided inside. All the connectors are there too. I have to say, it looks the nuts and I am so happy with the overall result of the clutch master cylinder reservoir upgrade along with the kit here.Thanks again Webike, great service.View Detail