?
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Fits: HONDA GROM (JC75-1000001-), HONDA GROM (JC61-1000001-/JC61-1300001-), HONDA MSX125 (MLHJC618_D5000001-), HONDA MSX125SF View more
About quality and texture: I am happy with the quality of the air cleaner and air cleaner element from SP Takegawa. The air cleaner housings is made from very durable plastic while one air cleaner element is made from a course sponge for race use and the other from a fine sponge for street use.About the feeling of use: Very happy to have an increase in performance while being able to maintain the same level of intake noise as the OEM Honda setup.Products to buy together: A full exhaust system would also be desirable to purchase alongside the air cleaner and air cleaner element to maximise the performance from the Grom.Difficulty of installation: The process to install takes about 20 minutes, remove and set aside the OEM Honda screws and after fitting the air cleaner use the included screws to secure the thicker air cleaner housing. Not difficult to do.Cost performance and comparison with other products: Good costing as you are getting a durable and high quality part with easy to clean air cleaner elements as compared to the more expensive pleated mesh style from the likes of K&N that require a special cleaning and oiling kit.About shipping and packaging: Sea freight was my preferred method of shipping due to the lower cost but currently this service is unavailable from Japan Post, EMS is much faster which is nice. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged.Any concerns, cautions, or advice when purchasing: If you are looking to use this air cleaner with the OEM Honda throttle body it is plug and play but if you will be pairing it with a big throttle body then you will need a larger throttle pipe to make this possible.
Fits: HONDA GROM (JC75-1000001-), HONDA GROM (JC61-1000001-/JC61-1300001-), HONDA MSX125 (MLHJC618_D5000001-), HONDA MSX125SF
About quality and texture - The air cleaner from SP Takegawa is made from injection molded plastic with a red surface finish and includes two grades of foam air cleaner elements, the quality from the overall fit and finish is perfect.About the feeling of use - Take a look at the increase in air cleaner element size. There is no better style of performance air cleaner to use with the original Grom airbox and the two air cleaner elements allows you to select the best performance based on your filtration needs for your riding environment.Products to buy together - Another product to purchase when looking to further increase the performance on the Grom would be a a lightweight oil filter spinner, allowing for an increased throttle response.Difficulty of installation - The installation of the air cleaner is a simple task that took 0.2 of an hour complete. Common sense is all that is required to secure the air cleaner in the original air box with the included longer mounting screws.Cost performance and comparison with other products - I find the cost of this product from SP Takegawa to high when compared to what most other companies sell their air cleaner for, especially when compared to the identical air filter from Koso.About shipping and packaging - With there being no cost difference between sea freight and EMS for the air cleaner, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail
Fits: HONDA GROM (JC75-1000001-), HONDA GROM (JC61-1000001-/JC61-1300001-), HONDA MSX125 (MLHJC618_D5000001-), HONDA MSX125SF
About quality and texture, I can confirm that the quality is great and that the materials used are one coarse sponge and one fine sponge for the two air filter elements and a hard plastic for the air filter frame. About the feeling of use, This air filter is the best to use to maximise the performance out of the original air cleaner box and having the option of the coarse and fine sponge air filters allows me to choose the ideal filtering level for the given riding environment. Products to buy together, If you are looking to get every bit of performance out of the original air cleaner box then it would be ideal to add the larger diameter air duct to your cart also. Difficulty of installation, I can say the fitment of the air filter for my installation was very easy due to the ease of access to the cover of the air cleaner box that needs to be removed before simply placing the air filter in and installing the cover to secure the air filter in place. Cost performance and comparison with other products, The pricing of the product is great. You receive two air filter elements made from quality sponge that can be cleaned and reused for thousands of miles. No addition cleaning and oiling kits required like some of the other brands. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View Detail
Fits: HONDA GROM (JC75-1000001-), HONDA GROM (JC61-1000001-/JC61-1300001-), HONDA MSX125 (MLHJC618_D5000001-), HONDA MSX125SF
* About quality and texture, The air cleaner frame is made from a very thick and heavy duty plastic and the two filter elements are made from foam and come in a fine and coarse grade to suit your riding environment.* About the feeling of use, Great addition for better air flow over the Honda paper air cleaner with it's much smaller surface area and cleaning the filter elements could not be simpler, just remove from the frame and wash in warm soapy water.* Products to buy together, If you are looking for the best performance then you will be needing to also purchase the larger diameter inlet duct from SP Takegawa.* Difficulty of installation, Installation requires removal of the airbox cover and discard the air cleaner and screws then fit the thicker SP Takegawa air cleaner and eight longer screw that are included. The process was completed in 15 minutes with no difficultly.* Cost performance and comparison with other products, There is a much cheaper option from Koso for the same designed air cleaner but it does only come with a coarse foam filter which may not your riding environment but I prefer the air cleaner from SP Takegawa as it comes with the two different grade filter elements.* About shipping and packaging, I am happy to wait 8 weeks on average for my parts to arrive in Sydney Australia via Webike's sea freight which comes with tracking and insurance so I know I'm covered in case something was to go wrong but with there outstanding bubble wrapping and boxing there have been no problems.* Any concerns, cautions, or advice when purchasing, The foam filter elements used in this air cleaner are a dry type and are not to be oiled, this is something that should be considered before purchasing. Use the product reviews to assist in making a decision on your purchase.View Detail
Fits: HONDA GROM (JC75-1000001-), HONDA GROM (JC61-1000001-/JC61-1300001-), HONDA MSX125 (MLHJC618_D5000001-), HONDA MSX125SF
OEM Replacement Type High Efficiency Air Filter.
The intake air volume seems to have increased because the exhaust sound becomes thicker when it is replaced.
On the other hand, I had one case of EngineStall when I opened it from Idling, so I think I should put Sub computer in it…View Detail
About quality and texture - The air filter round taper 46 mm from SP Takegawa is made from a dry multi-layered cotton gauze filter with a metal top and rubber base, the quality from the overall fit and finish is perfect.About the feeling of use - The heart behind my custom air filter install. Very compact in it's design that is perfect for squeezing it into some tight spacers. The metal chrome finished top is a nice touch on the Monkey 125.Products to buy together - Another product to purchase when looking to further increase the performance on the Monkey 125 would be a full exhaust system, which when paired together will allow for a freer air flow through the engine.Difficulty of installation - The installation of the air filter round taper 46 mm is a simple task that took 0.7 of an hour complete. Some mechanical aptitude and the use of basic hand tools is what is required to gain aceess, remove the original air box and secure the air filter round taper 46 mm to the throttle body inlet tube.Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the air filter round taper 46 mm is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the air filter round taper 46 mm, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail
About quality and texture - The air filter oval taper 46 mm from SP Takegawa is made from a dry multi-layered cotton gauze filter with a metal top and rubber base, the quality from the overall fit and finish is perfect.About the feeling of use - The heart behind my custom air filter install. Large in it's design that is perfect for maximizing the air intake with it's larger then normal filter surface area. The metal chrome finished top is a nice touch. Products to buy together - Another product to purchase when looking to further increase the performance would be a full exhaust system, which when paired together will allow for a freer air flow through the engine.Difficulty of installation - The installation of the air filter oval taper 46 mm is a simple task that took 0.7 of an hour complete. Some mechanical aptitude and the use of basic hand tools is what is required to gain aceess, remove the original air box and secure the air filter oval taper 46 mm to the throttle body inlet tube.Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the air filter oval taper 46 mm is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the air filter oval taper 46 mm, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail
Fits: HONDA Monkey 125 Thailand model (MLHJB02), HONDA Monkey 125 (JB02-1000001-)
About quality and texture - The power filter from SP Takegawa is made from injection molded plastic with black and red surface finishes and includes two grades of foam air cleaner elements, the quality from the overall fit and finish is perfect.About the feeling of use - Take a look at the increase in air cleaner element size. There is no better style of performance air cleaner to use with the original Monkey 125 airbox and the two air cleaner elements allows you to select the best performance based on your filtration needs for your riding environment.Products to buy together - Another product to purchase when looking to further increase the performance on the Monkey 125 would be a lightweight oil filter spinner, allowing for an increased throttle response.Difficulty of installation - The installation of the power filter is a simple task that took 0.3 of an hour complete. Common sense is all that is required to secure the power filter in the original air box and uses the original mounting screws.Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the power filter is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the power filter, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail
Perfect for the keihin pe24. High quality at an affordable price. Nice looking for the honda monkey z50j. Good dust protection.View Detail
Fits: HONDA DAX125 (JB06), HONDA DAX125 JB04-1000001-
Great quality air filter. Very easy install took less then 10mins. And make a noticeable difference. From starting. And through the gears. View Detail
Fits: HONDA GROM 21 Thailand [Vehicle type]JC92 [Engine type]JC92E, HONDA GROM 21 Domestic model [Vehicle type]2BJ-JC92 [Engine type]JC92E
About quality and texture: I am happy with the quality of the stainless steel header pipe and satin stainless steel muffler which is finished with a unique carbon fibre end cap. About the feeling of use: Super lightweight compared to the Honda exhaust which results in a good weight saving. This muffler design is on a larger proportion for the Grom but it manages to create a big bike sound from the little 125cc motor. Products to buy together: Some form of higher flow air filter would also be desirable to purchase along side this full exhaust system, I will be going with an open air intake from Kitaco. Difficulty of installation: The process to install takes about one hour to complete. A new gasket for the forward mounting flange is recommended. Not difficult to do. Cost performance and comparison with other products: Good costing as you are receiving a well designed and manufactured product using quality materials that will help increase performance but there are also other options for much less cost, so browse Webike available exhausts if you have a lower exhaust budget. About shipping and packaging: Sea frieght is my preferred method of shipping due to the lower cost and it is fantastic that it has returned as an option once again so I can put my money toward parts and not high shipping costs. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: A JMCA approved exhaust so it is suited for everyone that needs an exhaust to my legal specifications.View Detail
About quality and texture: I am happy with the quality of the pulley holder from Kitaco made from a steel construction with a PVC coating over the band to help improve it's hold.About the feeling of use: I have used this tool to hold the clutch and flywheel on my Honda Grom when removal of these parts were required for maintenance with great success. The adjustable band makes this tool very versatile for varies sized motorcycle parts.Products to buy together: Some more tooling like a center lock nut wrench would also be desirable to purchase along side the pulley holder so when it comes time to remove the clutch assembly and oil spinner on your Honda Grom you have all the special tooling required to complete the job.Difficulty of installation: The process to install takes a few minutes, place the pulley holder around the part that needs to be held and adjust the band if required. Tighten down the T handle so that the band holder does not allow the part to spin as you undo the fastener securing the part. Not difficult to do.Cost performance and comparison with other products: Good costing as this is a quality made band holder from Kitaco that has with stood numerous usage without failure as compared to the first band hold that I purchased from another site that failed soon after.About shipping and packaging: The faster shipping options are too expensive for myself so I just have to wait for my part to arrive via sea freight. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged.Any concerns, cautions, or advice when purchasing: These band holder are limited to the sized parts they can hold. No smaller the 6cm in diameter and no larger then 12cm in diameter.View Detail
About quality and texture: I am happy with the quality of the stainless steel header pipe and polished stainless steel muffler which is finished with a unique designed end cap. About the feeling of use: Super lightweight compared to the Honda exhaust which results in a good weight saving. This exhaust system design and proportions are well suited to the Grom and it manages to generate an enjoyable exhaust note from the little 125cc motor. Products to buy together: Some form of higher flow air filter would also be desirable to purchase along side this full exhaust system, I chose to go with an open air intake from Chimera. Difficulty of installation: The process to install takes about one hour to complete. A new gasket for the forward mounting flange is recommended and modification to the rearset is needed for the third generation Grom. Not difficult to do. Cost performance and comparison with other products: Good costing as you are receiving a well designed and manufactured product using quality materials that will help increase performance but there are also other options for much less cost, so browse Webike available exhausts if you have a lower exhaust budget. About shipping and packaging: Sea frieght is my preferred method of shipping due to the lower cost and it is fantastic that it has returned as an option once again so I can put my money toward parts and not high shipping costs. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: A JMCA approved exhaust so it is suited for everyone that needs an exhaust to my legal specifications.View Detail
Fits: HONDA GROM 13-15|16|17-20, HONDA GROM 13-15|16|17-20
About quality and texture: I am happy with the quality of the titanium exhaust from Over Racing. The muffler is quite compact with a removable baffle inside and made from titanium, while the exhaust piping is very large in diameter at the exhaust port end and just continues to expand all the way up to the muffler connection and is also made from titanium. About the feeling of use: The titanium exhaust is an aggressive looking exhaust on the Grom but the exhaust note is very enjoyable to hear at idle and through the entire RPM range due to the baffling within the short muffler. Products to buy together: Some form of higher flow air filter would also be desirable to purchase alongside this titanium exhaust to help achieve maximum performance. Difficulty of installation: The process to install took about one hour, I was removing an aftermarket exhaust which was very simple as it was just the two nuts at the front and one bolt at the back but the exhaust port gasket was very difficult to remove. Cost performance and comparison with other products: High costing but you are getting a full titanium exhaust system with features to help obtain high performance at a high price as compared to the much cheaper stainless steel version available from Over Racing. About shipping and packaging: Sea frieght is my preferred method of shipping due to the lower cost and it is fantastic that it has returned as an option once again so I can put my money toward parts and not high shipping costs. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: Zero concerns or cautions on this product and the advice is to purchase if you have the money. View Detail
Fits: HONDA glom MSX125(JC61-1000001-), HONDA SUPER CUBC125 (JA48), HONDA MONKEY125 (JB02)
About quality and texture: I am happy with the quality of the sports camshaft from SP Takegawa, wonderful machining throughout and great quality bearings fitted. About the feeling of use: I was looking for a camshaft to make the 125cc engine higher revving which it has and I'm really happy with how it performs on the open road with no real loss of power in the lower RPMs which is ideal for around town. Products to buy together: Some type of fuel controller is needed to be purchase along side the sports camshaft, the SP Takegawa FICON 2 is well suited to this type of performance modification. Difficulty of installation: The process to install takes about half an hour, was an easy job to complete after reading through the Honda service manual directions. Not difficult to do. Cost performance and comparison with other products: High costing, the cheapest high RPM camshaft available here on Webike is the Endurance hi-power camshaft but does not look to have a power curve anywhere near as good. About shipping and packaging: Sea frieght is my preferred method of shipping due to the lower cost and it is fantastic that it has returned as an option once again so I can put my money toward parts and not high shipping costs. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: Webike has many camshaft to choose from and the choice is difficult, much research is required to get as close as possible to your desired performance outcome.View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING