About quality and texture: I am happy with the quality of this set of rear shock absorbers. Lots of chrome plated steel on these, from the shock body to the springs and then the pre-load adjusters are made from cast aluminium.About the feeling of use: To me they look much better then the Honda rear shocks and there is no doubt they perform better and this is mainly because they have heavier rated springs.Products to buy together: Some type of upgrade to the front forks would also be desirable to purchase along side these rear shock absorbers. I didn't want to go to the trouble of completely disassembling the front forks for heavier rated springs, so I just changed the fork oil to a 20w for now and it is an improvement.Difficulty of installation: The process to install takes about three quarters of an hour, 2 acorn nuts per shock and multiple wahers are all that is involved. Not difficult to do.Cost performance and comparison with other products: Good costing as you are getting a suitably sprung set of rear shock absorbers that look great on the Monkey 125 in chrome and they are affordable for your average rider as compared to most of the other options here on Webike which are much more expensive.About shipping and packaging: The faster and more expensive shipping are the only option for suspension. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged.Any concerns, cautions, or advice when purchasing: If you weight less than 70kg then I think you will find the spring rate of these rear shock absorbers too high and you should checkout the ones available from Takegawa, which are also available in chrome.

About quality and texture - Top quality for the low price they are going for here on Webike. Chrome plating on the shock body and spring is holding up well after some use.About the feeling of use - For a basic rear shock they are performing great on my short daily commute. They have preload adjustment but due to the heavier springs over the OEM ones I have not required to make any adjustment.Products to buy together - MiniMoto make some Monkey 125 specific parts and I'd like to add their Honda 3D fork emblem kit to give my Monkey a bit more retro styling.Difficulty of installation - Installation of the rear shocks is very simple on this motorcycle. Can be performed by just one person with a spanner.Cost performance and comparison with other products - These are cheap dollar wise when comparing to what is available here on Webike but you will be surpised of the quality you get for such little money.About shipping and packaging - I think Webike are doing their best with shipping pricing, so I'm happy. Packages ship within 24 hours and arrive very quickly from Japan.Any concerns, cautions, or advice when purchasing - It is a shame Mini Moto only offer these shocks in chrome and black, so if you are wanting another colour shock to match your Monkey you will be wanting to take a look at the ones availble from Kitaco.

About quality and texture - Great quality, I really like the chrome but the welds around the base of the eyelets could be a little better.About the feeling of use - They handle my 80kg way better then the Honda OEM ones did, a much firmer ride which I like.Products to buy together - I paired these together with some stiffer fork springs from Kitaco to complete my suspension transformation.Difficulty of installation - Easy to install, I just changed one at a time so no stand was required.Cost performance and comparison with other products - You will not find much cheaper costing rear shocks then these but they are a very basic replacement compared to what is available at a much higher cost.About shipping and packaging - Only option to Australia was express, so I had them in my hands within a week but was expensive.Any concerns, cautions, or advice when purchasing - Add a little grease to the mounting points when installing these to keep the pivot operation smooth.

I needed to get a photo attached to this listing on Webike so you can see how good these chrome old school looking shocks look on the Monkey 125. For me they really fit the original styling of this motorcycle, I know there a better performing rear shocks out there but I did not want to have anything too modern looking.The diameter of the springs are larger then the OEM Honda ones and give the rear of the motorcycle a more solid look now. Mini Moto stickers are included fitted to the inner section of the shock and you can choose to mount the shocks to display this or not. The pricing of these rear shocks id very good but shipping costs to Australia is high.

The Honda Monkey 125 OEM rear shock absorbers are under sprung for most people so are an upgrade that is most likely required. I compared many shock absorbers available for the Honda Monkey 125 and for my budget and styling for my Monkey the MiniMoto chrome ones was what I decided to go with. Once received and inspected I give them a 4 out of 5 for quality. The installation is very easy. They come with a collar to adjust the pre-load on the spring but at my weight of 74 kg the lowest setting with no additional pre-load was used. Since riding with these fitted the rear of the bike it a lot firmer and to be quite honest maybe a bit firmer then I wanted.

Приобретал для Honda Monkey. Со временем планирую произвести замену сцепления, причем использовать запчасти с повышенной производительностью. Специалисты порекомендовали данное сцепление, так как его обычно используют при увеличении мощности двигателя. Внешне выполнено все хорошо, покупкой доволен. Purchased for Honda Monkey. Over time, I plan to replace the clutch, and use spare parts with increased performance. Experts recommended this clutch, as it is usually used when increasing engine power. Outwardly, everything is done well, the purchase is satisfied.

Приобретал для Honda Monkey. Колодки миниатюрные, но внушают доверие. По качеству изготовления и по материалам претензий нет. Установка прошла без нареканий. Динамические тесты теперь буду производить в следующем сезоне, но предварительно все отлично.Purchased for Honda Monkey. The pads are tiny, but they inspire confidence. There are no complaints about the quality of workmanship and materials. The installation went without a hitch. Dynamic tests will now be performed next season, but preliminary everything is fine.

Приобретал для Honda Little Cub. Колодки отличные, хороший материал. С установкой все нормально, прошло без проблем. К сожалению произвести динамические испытания не удалось, но в целом все отлично!Purchased for Honda Little Cub. The pads are excellent, good material. With the installation everything is fine, it went without problems. Unfortunately, it was not possible to make dynamic tests, but in general everything is fine!

Заказывал для Honda Little Cub. Замечательное качество, точные размеры, по внешнему виду очень похоже на оригинальный фильтр. Установка проста и не требует больших временных затрат. Хорошая покупка.Ordered for Honda Little Cub. Excellent quality, accurate dimensions, looks very similar to the original filter. Installation is simple and does not require much time. Good buy.

Приобретал для замены глушителя на Honda Monkey. Все отлично подошло, качество превосходное, в чем я и не сомневался. Как всегда к продукции KITACO претензий нет!Purchased to replace a muffler on a Honda Monkey. Everything fit perfectly, the quality is excellent, which I had no doubt about. As always, there are no complaints about KITACO products!