I seem to be more and more buying genune Yamaha screws. And for good reason. These Yamaha screws just fit, no meesing around trying to get them to rip, they just work.Finding the part numbers was pretty easy using the tools and the links Webike provide to manufactyrers websites where you input your bike model, year etc and the parts are shown.Really good price for these and better than I could source locally in the UK. I always get more than one part at a time which helps cushion the shipping costs. I used EMS this time and the order was with me at my door within a week of ordering.Everything was well packed out in the box. The outer box was sealed so nothing could fall out in transit. Bubblewrap was also used by Webike to fill out the box so nothing moved around and damaged any other parts in the order.Once unpacked carefully, the screws were in perfect condition and there were not unexpected sharp edges to catch you out. All fitted really wuickly. Very happy with the results even though this time they were only screws.Thanks Webike, mich appreciated for all your hard workView Detail

Winter project is changing some of the old looking nuts, bolt etc. This hte rear locking nut for the axle which on mine, looks a little worse for wear.Part number was super easy to find and then search on Webike. The rice was excellent to what I would have to pay in the UK. I ordered quite a few different parts for miltiple bike and this was part of that. This cushioned the shipping so all together was very reasonable.Upon delivery which took about a week, the parts were all nicely packaged and very well padded out so not to damage anything.The outer box was also sealed so any small parts had no way of escaping.The nut is brilliant, nice and smooth finish, no burrs and went onto the bike very quickly.Thank you again Webike for all your help.View Detail

I already replaced my tw200 front wheel oil seal .Now Time Has Come To Replace The Rear Wheel Oil Seal.Before I removed the rear wheel put the bike onto a stand support the bike securely so make sure there is no danger of it falling over,then remover the cotter pin and slowly loosen the rear wheel nut by using a 22mm socket wrench.rear wheel was off the ground lay the wheel on a flat surface with the sprocket side facing up.removed the spacer and dust seal then removed the old oil seal using a flat screw driver or a seal puller. cleaned the surface area with parts cleaner .Inner brake hub bearing does not have a seal So Grease the edge of a new seal and drive it in on top of the outer bearing .I used same outer diameter socket to tap the new oil seal in liitle bit further.New seal will sit slightly below the surface of the rear wheel flange.this OEM Seal is the best product for this project because seals are designed to keep wheel bearing lubricant within the wheel end, and keep all debris, dirt, and other contaminants out while on the road.I received the package very quickly after I placed a order at webike shop.Very Nice Service, Very Fast And Professional Delivery In Sri Lanka, Nicely Packed I love it, I'm Totally Satisfied the webike services.Very Nice Shopping Experience at WEBIKE . Thank You SO MUCH.I HIGHLY RECOMMENDEDView Detail

Those metal tabs are inexpensive.These tabs are very high strenght, does not break easily and can be used for a long time. The lock tabs prevent the bolts from turning, shifting, and wallowing out.It's very important have those locking tabs when replacing the rear sprocket. The point of the locking tabs is that they're softer than the sprocket material, allowing some "crush" to prevent spinning of the bolts and to get a better grip on the hardened metals, allowing more grip for less torque on the bolts.The tabs augment this. Hardened washers allow sliding between themselves and the hardened sprocket. Kinda hard for some to get their head around, but hardened washers are not an improvement over the factory setup.That's why I always use OEM products everytime CAUSE of the Quality nobody can't beat that.parts are received in a good condition very well packed! THANKS WEBIKE . ONCE AGAIN these spare parts are sold at a very low prices, webike shop doing a great job for overseas motorcycle community like us. I would like to thank webike for that. Happy Customer !View Detail

중고로 오토바이를 구매하여 뒷타이어를 가는 과정에서 드라이브 벨트가 잘 못 체결되어 있어서 주행중 위험이 있다는 이야기를 듣고 부품을 구입할려고 야마하 대리점에 확인하니 비용만 70만원이 넘는다고 함.그냥 벨트인데 70만원...휴---이베이를 검색하니 대략 40만원 정도에 배송료 별도..위바이크 재팬에 검색하니 38만원에 배송료 별도..저렴한 해상배송을 선택하고 주문하니 약 10일만에 자택까지 배송됨(항공우편으로 온듯)총 금액은 배송료 포함해서 약 44만원, 관세 약 8만원 해서 52만원 정도에 구매..현재 수리중에 있음국내 대리점에서 구매한 것에 비해 만족하지만 단순 벨트가 너무 비쌈..----------------------------------------------------------In the process of purchasing used motorcycles and going back tires, the drive belt is not well -signed, so there is a danger while driving, and it is more than 700,000 won.It's just a belt, but it's 700,000 won ... Hugh ---Search for eBay. Separate .. Select a cheap maritime delivery and order it to home in about 10 days (as if it comes by air mail) The total amount is about 440,000 won including shipping fee. , The tariff is about 80,000 won 520,000 won.Powered by Google TranslatorView Detail

Shim part number 5SL-25827-10Again, none of these shims either. Very odd so I decided to buy the set for the rear of the FZ1N 2008.Finding these shims was pretty easy and they fit a lot of different model Yamaha's.I used the tools provided by Webike and the links they have that sends you to the manufacturer websites where you can view schematics of models.The cost of this shim was very good and better than I could source locally. I always have more than one item in each order from Webike which helps with the shipping cost massively. I opted for the EMS fast service this time and from ordering to delivery, it took 5 days total. That is excellent in my eyes. From Japan to the UK, wow!!All the items in my order were very well packed and even the smallest items like these shims were individually packed so there would be no damage to the parts or any others in the same box. I have to hand it to Webike, they pack your orders really well and even go the lengths of filling any empty space that could allow your parts to move around, with bubble wrap and air bubble pockets. As you can imagine, everything arrives safe and sound.The shims are really good quality and the painted finsih really adds to this. All 3 shims were installed quickly as I already had the caliper loose.If you have never had shims in your calipers, you wouldn't miss them but when you DO get them, you will never not be without them.Really happy customer, Thank you Webike for the great work and service you provideView Detail

Shim part number: 5SL-25827-00For some reason my bike did not have any rear shims. Very odd so I decided to buy the set for the rear of the FZ1N 2008.Finding these shims was pretty easy and they fit a lot of different model Yamaha's.I used the tools provided by Webike and the links they have that sends you to the manufacturer websites where you can view schematics of models.The cost of this shim was very good and better than I could source locally. I always have more than one item in each order from Webike which helps with the shipping cost massively. I opted for the EMS fast service this time and from ordering to delivery, it took 5 days total. That is excellent in my eyes. From Japan to the UK, wow!!All the items in my order were very well packed and even the smallest items like these shims were individually packed so there would be no damage to the parts or any others in the same box. I have to hand it to Webike, they pack your orders really well and even go the lengths of filling any empty space that could allow your parts to move around, with bubble wrap and air bubble pockets. As you can imagine, everything arrives safe and sound.The shims are really good quality and the painted finsih really adds to this. All 3 shims were installed quickly as I already had the caliper loose.If you have never had shims in your calipers, you wouldn't miss them but when you DO get them, you will never not be without them.Really happy customer, Thank you Webike for the great work and service you provideView Detail

Shim part number 5SL-25828-01 After checking my bike due to needing to change rear pads, I noticed ther was no shims. Very odd so I decided to buy the set for the rear of the FZ1N 2008. Finding these shims was pretty easy and they fit a lot of different model Yamaha's. I used the tools provided by Webike and the links they have that sends you to the manufacturer websites where you can view schematics of models. The cost of this shim was very good and better than I could source locally. I always have more than one item in each order from Webike which helps with the shipping cost massively. I opted for the EMS fast service this time and from ordering to delivery, it took 5 days total. That is excellent in my eyes. From Japan to the UK, wow!! All the items in my order were very well packed and even the smallest items like these shims were individually packed so there would be no damage to the parts or any others in the same box. I have to hand it to Webike, they pack your orders really well and even go the lengths of filling any empty space that could allow your parts to move around, with bubble wrap and air bubble pockets. As you can imagine, everything arrives safe and sound. The shims are really good quality and the painted finsih really adds to this. All 3 shims were installed quickly as I already had the caliper loose. If you have never had shims in your calipers, you wouldn't miss them but when you DO get them, you will never not be without them. Really happy customer, Thank you Webike for the great work and service you provideView Detail

I ended up wioth a small amount of damage to this panel, probably from a flicked up stone. Not massive damage but managed to punch a small hole in the panel. Finding the part was easy using the tools provided by Webike and the links to manufacturers etc. After finding the correct part for my bike, it was added to a larger order with other minor parts for project bikes along with my own.The cost of shipping was spread out vastly due to the small parts etc. I used EMS this time as they seem to be slightly faster at getting the order to my door. This time, is took 5 days to arrive from ordering.The outer box was sealed with tape so nothing could fall out in transit, the inside of the box was packed out with bubble wrap filling any empty spaces. SOme of the parts were small and a couple were larger and this could have possibly been bad but as Webike had the foresight to fill the empty spaces in teh box, nothing could get damaged moving around.The part after opening the Yamaha packaging looks absolutely gorgeous. The finish is beautiful, all perfect and even the honeycomb section is smooth eith no jagged bits.Installation was pretty straight forward and took about half an hour and then everything else had to go back on.One happy customer and thank you Webike for the great service you provideView Detail

This was the last part of my qs jand shift rod job. It's just a nut but it's a Yamaha nut. I found the correct part number by checking the Yamaha Parts Catalogue which is available to anyone online.The nut was really cheap and although I could have used any nut that fitted, why bother putting some other brand on when the genune Yamaha one is as cheap as this.I had other items in my order, the qs and shift rod being a couple of those. The shipping was really good as I ordered more than one item. EMS was the courier I used for this order and I am very impressed at just how quick they deliver. I thoguth Fedex was good but EMS is quicker.Everything in my order was individually packed and therefore, couldn't be damaged but otehr parts. Any spare space in teh outer box was also packed out with additional filler.Yes, it's just a nut, but again, it's a Yamaha nut and looks great, not sharp burrs or anything and went on very smoothly.Altogether, I am very pleased with how it all went. Thank you Webike for the great service. Keep it upView Detail