Very nice item no defects at all. Great Job. I am from the philippines and It arrived faster than I've expected. Within 1-2 weeks I have already received it. ThankyouView Detail

The quality of the product is good without any damage. The packaging is well done properly. The shipment is fast as expected.View Detail

I boughtb this legit Daytona Katana grip. It feels like a katana grip and the feel is superb.. when i use it. It not that hard and comfortable even for long ride. It was fairly easy to install if you know how to. Its price is awsome and the feel of the grip excels above other designed grips i bought. The item is well package and shipping is faily fast. Make you uou know the length of the grip as it comes in 120mm and 125mm.View Detail

I tought it doesn t need both side, so i just ordered only left side part. And It perfectly fits on my z900rs cafe.I am loveing it and recommend to others.View Detail

Im using this for Giorno 2T but it was my mistake beacuse Giorno's grip size was short... but if you want to change your grip you must mesure the size of your bike's grip length!!!this grip is really good grip looks like not real natural rubber but special synthetic rubber it does not stick mess your hands, grip feels also good and i recomend this grip shows good performence to wide handle bikes such as SR400 or W650,800 or any kind of nake bikes and trackers im satisfied.데이토나 그리피 그립 입니다 나는 스쿠터에 장착 했는데 길이가 살짝 남습니다 와이드 앵글 핸들 바이크에 굉장히 잘 어울릴것으로 예상합니다 그립력이 상당하고 손에 뭍어나는것도 없고 상당히 쫄깃한 맛이 있는 그립입니다 카테고리 상으로는 레벨250 레벨500 한테 맞는 그립이라고 나오네요 View Detail

This tool does what you want if you use it for its intended purpose. I bought the Husqvarna flywheel to hold while tightening the nut. Some said it failed and didn't do its job. Don't use it to change the oil filters in your car or load your ex-girlfriend's tire and it should work just fine.The safest non-destructive way to hold the flywheel for removal of the highly torqued nut. Could use a stronger clamping shaft to hold things while re-torquing the nut during installation. Bends a little too easily. Also, the vinyl coating on the band is slippery on a smooth flywheel surface. Powdered resin solves the slip issue.I've used this on a few motorcycles, Honda and Husky and it still looks and works as it should. I recommend it.View Detail

I prefer it for the CRF250L. There is always a spare filter. I love this oil filter. I have it for 2 years and use it on my bike at 30000 km, usually with an oil change every 5,000. I've had no problems with any part of this filter. The included sticker is very helpful. I plug it into my fork and I always know when my next oil change will be. I wish these came with some o-rings or gaskets that the bike needs, but that is expected as this filter is not from Honda and is much cheaper. This filter is one of the reasons I buy the female dental product if I can.View Detail

I gave a place in my toolbox.It's definitely a luxury item, but I think it's worth it. They make setup very easy and work exactly as you hope. The quality and feel won't surprise you, but they're good for the price. The cutter isn't great and for some reason it doesn't work close enough to the pivot point which is kind of annoyingHandles safety wire like a champ, could use cutting edge run all the way to joint, there is a about a 1/2" where there is no cutter but that is nit-picking. Used it on three sets of grips with no issues.cut through the wire fine without damaging themselves, and I expect them to hold up for a long timeView Detail

I have a crf that I rebuilt. I also changed the brake lines. I bought a known brand steel braided one. It didn't fit. It's always good to use the original. I bought the original. It was a bad and expensive experience.Oem It works perfectly. Shipping is very fast and very nice packed.thanks WebikeView Detail

Engineer is Japanese brand whose tools are of very high quality and designed for the professional user; a small number of specialist and semi-specialised items were purchased since the first introduction some years ago. Unlike other Oriental-made brands, the grade of steel used is high and very suitable for the task. firstly in the jaws that include vertical grooves to lock onto a screw head, nut, bolt etc should it have been previously damaged in some way and not removable by other means. It is then capable of removing it cleanly and easily. There are also the usual horizontal grooves, too, for every other situation. The tool is quite short, only 14 cm and ideal for smaller tasks and use in tight spaces.Not have soft-grip handles been .but its overall design locks very differently to other 'Mole' wrenches; when most have a separate locking and release bar built into the section without the adjuster screw, this design needs only to have its handles prised gently apart. Quality comes at a price and Engineer-brand tools are more expensive than other high-end equivalents. View Detail