* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Fits: HONDA GROM (JC75-1000001-), HONDA GROM (JC61-1000001-/JC61-1300001-), HONDA MSX125 (MLHJC618_D5000001-), HONDA MSX125SF View more
* About quality and texture, The air cleaner frame is made from a very thick and heavy duty plastic and the two filter elements are made from foam and come in a fine and coarse grade to suit your riding environment.* About the feeling of use, Great addition for better air flow over the Honda paper air cleaner with it's much smaller surface area and cleaning the filter elements could not be simpler, just remove from the frame and wash in warm soapy water.* Products to buy together, If you are looking for the best performance then you will be needing to also purchase the larger diameter inlet duct from SP Takegawa.* Difficulty of installation, Installation requires removal of the airbox cover and discard the air cleaner and screws then fit the thicker SP Takegawa air cleaner and eight longer screw that are included. The process was completed in 15 minutes with no difficultly.* Cost performance and comparison with other products, There is a much cheaper option from Koso for the same designed air cleaner but it does only come with a coarse foam filter which may not your riding environment but I prefer the air cleaner from SP Takegawa as it comes with the two different grade filter elements.* About shipping and packaging, I am happy to wait 8 weeks on average for my parts to arrive in Sydney Australia via Webike's sea freight which comes with tracking and insurance so I know I'm covered in case something was to go wrong but with there outstanding bubble wrapping and boxing there have been no problems.* Any concerns, cautions, or advice when purchasing, The foam filter elements used in this air cleaner are a dry type and are not to be oiled, this is something that should be considered before purchasing. Use the product reviews to assist in making a decision on your purchase.
Fits: HONDA GROM (JC75-1000001-), HONDA GROM (JC61-1000001-/JC61-1300001-), HONDA MSX125 (MLHJC618_D5000001-), HONDA MSX125SF
About quality and texture - The air cleaner from SP Takegawa is made from injection molded plastic with a red surface finish and includes two grades of foam air cleaner elements, the quality from the overall fit and finish is perfect.About the feeling of use - Take a look at the increase in air cleaner element size. There is no better style of performance air cleaner to use with the original Grom airbox and the two air cleaner elements allows you to select the best performance based on your filtration needs for your riding environment.Products to buy together - Another product to purchase when looking to further increase the performance on the Grom would be a a lightweight oil filter spinner, allowing for an increased throttle response.Difficulty of installation - The installation of the air cleaner is a simple task that took 0.2 of an hour complete. Common sense is all that is required to secure the air cleaner in the original air box with the included longer mounting screws.Cost performance and comparison with other products - I find the cost of this product from SP Takegawa to high when compared to what most other companies sell their air cleaner for, especially when compared to the identical air filter from Koso.About shipping and packaging - With there being no cost difference between sea freight and EMS for the air cleaner, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail
Fits: HONDA GROM (JC75-1000001-), HONDA GROM (JC61-1000001-/JC61-1300001-), HONDA MSX125 (MLHJC618_D5000001-), HONDA MSX125SF
About quality and texture, I can confirm that the quality is great and that the materials used are one coarse sponge and one fine sponge for the two air filter elements and a hard plastic for the air filter frame. About the feeling of use, This air filter is the best to use to maximise the performance out of the original air cleaner box and having the option of the coarse and fine sponge air filters allows me to choose the ideal filtering level for the given riding environment. Products to buy together, If you are looking to get every bit of performance out of the original air cleaner box then it would be ideal to add the larger diameter air duct to your cart also. Difficulty of installation, I can say the fitment of the air filter for my installation was very easy due to the ease of access to the cover of the air cleaner box that needs to be removed before simply placing the air filter in and installing the cover to secure the air filter in place. Cost performance and comparison with other products, The pricing of the product is great. You receive two air filter elements made from quality sponge that can be cleaned and reused for thousands of miles. No addition cleaning and oiling kits required like some of the other brands. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View Detail
Fits: HONDA GROM (JC75-1000001-), HONDA GROM (JC61-1000001-/JC61-1300001-), HONDA MSX125 (MLHJC618_D5000001-), HONDA MSX125SF
About quality and texture: I am happy with the quality of the air cleaner and air cleaner element from SP Takegawa. The air cleaner housings is made from very durable plastic while one air cleaner element is made from a course sponge for race use and the other from a fine sponge for street use.About the feeling of use: Very happy to have an increase in performance while being able to maintain the same level of intake noise as the OEM Honda setup.Products to buy together: A full exhaust system would also be desirable to purchase alongside the air cleaner and air cleaner element to maximise the performance from the Grom.Difficulty of installation: The process to install takes about 20 minutes, remove and set aside the OEM Honda screws and after fitting the air cleaner use the included screws to secure the thicker air cleaner housing. Not difficult to do.Cost performance and comparison with other products: Good costing as you are getting a durable and high quality part with easy to clean air cleaner elements as compared to the more expensive pleated mesh style from the likes of K&N that require a special cleaning and oiling kit.About shipping and packaging: Sea freight was my preferred method of shipping due to the lower cost but currently this service is unavailable from Japan Post, EMS is much faster which is nice. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged.Any concerns, cautions, or advice when purchasing: If you are looking to use this air cleaner with the OEM Honda throttle body it is plug and play but if you will be pairing it with a big throttle body then you will need a larger throttle pipe to make this possible.View Detail
Fits: HONDA GROM (JC75-1000001-), HONDA GROM (JC61-1000001-/JC61-1300001-), HONDA MSX125 (MLHJC618_D5000001-), HONDA MSX125SF
OEM Replacement Type High Efficiency Air Filter.
The intake air volume seems to have increased because the exhaust sound becomes thicker when it is replaced.
On the other hand, I had one case of EngineStall when I opened it from Idling, so I think I should put Sub computer in it…View Detail
About quality and texture - The air filter round taper 46 mm from SP Takegawa is made from a dry multi-layered cotton gauze filter with a metal top and rubber base, the quality from the overall fit and finish is perfect.About the feeling of use - The heart behind my custom air filter install. Very compact in it's design that is perfect for squeezing it into some tight spacers. The metal chrome finished top is a nice touch on the Monkey 125.Products to buy together - Another product to purchase when looking to further increase the performance on the Monkey 125 would be a full exhaust system, which when paired together will allow for a freer air flow through the engine.Difficulty of installation - The installation of the air filter round taper 46 mm is a simple task that took 0.7 of an hour complete. Some mechanical aptitude and the use of basic hand tools is what is required to gain aceess, remove the original air box and secure the air filter round taper 46 mm to the throttle body inlet tube.Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the air filter round taper 46 mm is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the air filter round taper 46 mm, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail
About quality and texture - The air filter oval taper 46 mm from SP Takegawa is made from a dry multi-layered cotton gauze filter with a metal top and rubber base, the quality from the overall fit and finish is perfect.About the feeling of use - The heart behind my custom air filter install. Large in it's design that is perfect for maximizing the air intake with it's larger then normal filter surface area. The metal chrome finished top is a nice touch. Products to buy together - Another product to purchase when looking to further increase the performance would be a full exhaust system, which when paired together will allow for a freer air flow through the engine.Difficulty of installation - The installation of the air filter oval taper 46 mm is a simple task that took 0.7 of an hour complete. Some mechanical aptitude and the use of basic hand tools is what is required to gain aceess, remove the original air box and secure the air filter oval taper 46 mm to the throttle body inlet tube.Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the air filter oval taper 46 mm is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the air filter oval taper 46 mm, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail
Fits: HONDA Monkey 125 Thailand model (MLHJB02), HONDA Monkey 125 (JB02-1000001-)
About quality and texture - The power filter from SP Takegawa is made from injection molded plastic with black and red surface finishes and includes two grades of foam air cleaner elements, the quality from the overall fit and finish is perfect.About the feeling of use - Take a look at the increase in air cleaner element size. There is no better style of performance air cleaner to use with the original Monkey 125 airbox and the two air cleaner elements allows you to select the best performance based on your filtration needs for your riding environment.Products to buy together - Another product to purchase when looking to further increase the performance on the Monkey 125 would be a lightweight oil filter spinner, allowing for an increased throttle response.Difficulty of installation - The installation of the power filter is a simple task that took 0.3 of an hour complete. Common sense is all that is required to secure the power filter in the original air box and uses the original mounting screws.Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the power filter is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the power filter, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail
Perfect for the keihin pe24. High quality at an affordable price. Nice looking for the honda monkey z50j. Good dust protection.View Detail
Fits: HONDA DAX125 (JB06), HONDA DAX125 JB04-1000001-
Great quality air filter. Very easy install took less then 10mins. And make a noticeable difference. From starting. And through the gears. View Detail
Fits: HONDA CT125A AC 21 GASKET KIT A, HONDA CT125A AC 21 CYLINDER HEAD, HONDA Z125M 21 AC GASKET KIT A, HONDA Z125M 21 AC CYLINDER HEAD, HONDA Z125M 21 A AC GASKET KIT A
* About quality and texture, The cylinder head gasket is made from steel, has great in service life and only required replacement while refreshing the top end.* About the feeling of use, Perfect fit with all the required cutouts aligning correctly and zero leaks after assembly.* Products to buy together, A new cylinder base gasket will also need to be purchase along with the cylinder head gasket when assembling the top end.* Difficulty of installation, The installation requires the head to be removed which involves rotating the engine to TDC, removing the cam sprocket and chain then undoing the four head nuts. Reverse the process for installation and torque the head nuts down in a criss cross pattern. The process was completed in 30 minutes with no difficultly.* Cost performance and comparison with other products, This genuine Honda replacement cylinder head gasket is good value but there is an even better value option from K-Pit if you are happy to use aftermarket parts.* About shipping and packaging, I am happy to wait 8 weeks on average for my parts to arrive in Sydney Australia via Webike's sea freight which comes with tracking and insurance so I know I'm covered in case something was to go wrong but with there outstanding bubble wrapping and boxing there have been no problems.* Any concerns, cautions, or advice when purchasing, If you are interested in any other parts for repairs then view the Honda MSX125 (GROM) OEM parts here on Webike. Use the product reviews to assist in making a decision on your purchase.View Detail
Fits: HONDA CRF250L 17 AC TURN SIGNAL (1), HONDA CRF250L 17 A AC TURN SIGNAL (1), HONDA CRF250L 16 AC TAILLIGHT, HONDA CRF250L 16 AC TURN SIGNAL, HONDA CRF250L 15 AC TURN SIGNAL
* About quality and texture, The front turn signal bulb is dual filament that allows the front turn signals to operate as day time running light and turn signal.* About the feeling of use, The replacement turn signal bulb has brought the Grom back up up to standard after a slight mishap resulted in day time running light filament in the turn signal bulb going out. Perfect Honda fit and finish.* Products to buy together, Due to the mishap I was also needing a new turn signal lens.* Difficulty of installation, The installation requires the removal of one screw from the inner lower corner of the turn signal and pull the lens out from that corner the turn the turn signal bulb counter clockwise to release it from the fitting. Reverse the process to complete the installation of the turn signal bulb The process was completed in 5 minutes with no difficultly.* Cost performance and comparison with other products, The price of the Honda turn signal bulb is good if you are just needing to replace a damaged bulb and is your best option but if you are needing mutiple lenses and bulbs together then the blinker lens set from Kitaco is a better option.* About shipping and packaging, I am happy to wait 8 weeks on average for my parts to arrive in Sydney Australia via Webike's sea freight which comes with tracking and insurance so I know I'm covered in case something was to go wrong but with there outstanding bubble wrapping and boxing there have been no problems.* Any concerns, cautions, or advice when purchasing, If you are interested in any other parts for repairs then view the Honda MSX125 (GROM) OEM parts here on Webike. Use the product reviews to assist in making a decision on your purchase.View Detail
Fits: HONDA CTX700ND AC 15 TURN SIGNAL, HONDA CTX700ND AC 14 TURN SIGNAL, HONDA CTX700ND A 18 TURN SIGNAL, HONDA CTX700ND A 15 TURN SIGNAL, HONDA CTX700ND A 14 TURN SIGNAL
* About quality and texture, The turn signal lens is molded from a durable amber tinted plastic.* About the feeling of use, The replacement turn signal lens has brought the Grom back up up to standard after a slight mishap resulted in a cracked turn signal lens. Perfect Honda fit and finish.* Products to buy together, The daytime running light filament in the bulb was also out after the mishap so was needed to be purchased too.* Difficulty of installation, The installation requires just the removal of one screw from the inner lower corner of the turn signal and pull the lens out from that corner. Reverse the process to complete the installation of the turn signal lens. The process was completed in less than 5 minutes with no difficultly.* Cost performance and comparison with other products, The price of the Honda turn signal lens is good if you are just needing to replace a damaged lens and is your best option but if you are needing mutiple lenses and bulbs together then the blinker lens set from Kitaco is a better option.* About shipping and packaging, I am happy to wait 8 weeks on average for my parts to arrive in Sydney Australia via Webike's sea freight which comes with tracking and insurance so I know I'm covered in case something was to go wrong but with there outstanding bubble wrapping and boxing there have been no problems.* Any concerns, cautions, or advice when purchasing, If you are interested in any other parts for repairs then view the Honda MSX125 (GROM) OEM parts here on Webike. Use the product reviews to assist in making a decision on your purchase.View Detail
Fits: HONDA MSX125SF , HONDA MSX125 (MLHJC618_D5000001 or later), HONDA MSX GROM (MLHJC92), HONDA GROM (JC75-1000001 or later/JC92-1000001 or later), HONDA GROM (JC61-1000001 or later/JC61-1300001 or later)
* About quality and texture, Impressive looking shock with it's much larger in diameter spring coils are made from steel and powder coated red, while the shock body is made from steel and finished in a durable chrome plating.* About the feeling of use, The pre-load adjustment is really nice to have to be able to correctly setup for weight differences on the rear end. The performance is greatly improved on all surfaces and just being able to ride with no more concerns is fantastic.* Products to buy together, The front forks performance or lack of will be more noticeable now so a set of fork springs from Kitaco with the correct spring rate to suit your weight is what you also want to purchase to complete the suspension upgrades.* Difficulty of installation, Installation requires a lift to support the motorcycle from the subframe during the replacement and removal of the left body panel and wheel hugger to access the bolts. The process was completed in 40 minutes with no difficultly.* Cost performance and comparison with other products, A very reasonable prices rear shock absorber and a great product with it's good looks and performance which are well above the Honda OEM one. If you have more money to spend, then you can purchase a rear shock absorber with more features.* About shipping and packaging, I am happy to wait 8 weeks on average for my parts to arrive in Sydney Australia via Webike's sea freight which comes with tracking and insurance so I know I'm covered in case something was to go wrong but with there outstanding bubble wrapping and boxing there have been no problems.* Any concerns, cautions, or advice when purchasing, A very good choice for your average rider, no need for Ohlins. Use the product reviews to assist in making a decision on your purchase.View Detail
Fits: HONDA glom 13-18 2nd Gen MSX125, HONDA glom 13-18 1st Gen MSX125
* About quality and texture, Just what I was after to match up with the factory drive chain setup, this steel 16T front sprocket is made from steel and is 420 pitch just like the remaining Honda 34T rear sprocket and chain.* About the feeling of use, Since increasing the power output of the Grom engine I was looking for a way to keep my front wheel on the ground and lower my RPMs at higher cruising speeds and simply increasing the front sprocket by one tooth has achieved that for me.* Products to buy together, I changed the front sprocket early on when there was low KMs on the drive chain setup but if you have high KMs on your drive chain setup and wish to change the front sprocket gearing then I would be also purchasing a new rear sprocket and new chain.* Difficulty of installation, Installation requires removing the sprocket cover for access and removing the two bolts fron the locking tab before removing the 15T front sprocket. Since I was going up up one tooth on the front sprocket, loosening the chain tension was needed to allow the 16T sprocket and chain to be installed with the correct chain tension. The process was completed in 30 minutes with no difficultly.* Cost performance and comparison with other products, Not the cheapest 16T front sprocket available here to purchase but I was happy to pay $5 more for a front sprocket that matched the remaining parts of my factory drive chain setup. If you want the best value then Kitaco sprockets are what you will wan to purchase.* About shipping and packaging, I am happy to wait 8 weeks on average for my parts to arrive in Sydney Australia via Webike's sea freight which comes with tracking and insurance so I know I'm covered in case something was to go wrong but with there outstanding bubble wrapping and boxing there have been no problems.* Any concerns, cautions, or advice when purchasing, Don not mix and match new and used sprockets and chains as you will lessen the life of the new products and be wasting your money, spend more at the start to save in the end. Use the product reviews to assist in making a decision on your purchase.View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
Customer Service
INFORMATION
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING