These looked awesome, i bought them because they look similar to my honda baja mirrors but the oem ones arent available so it was awesome that i could get these items which fitted very wellView Detail

Приобретал для Honda Little Cub. По внешнему состоянию все отлично, от оригинала отличий нет. Установка прошла без проблем. В движении попытался настроить положение и лопнул отражающий стеклянный элемент. Оказалось тонкое стекло. Не приятная ситуация, сезон не отработало. Брать его больше не буду. Прямоугольная форма даёт худший обзор.Purchased for Honda Little Cub. In external condition, everything is fine, there are no differences from the original. Installation went without problems. In motion, I tried to adjust the position and the reflective glass element burst. It turned out to be thin glass. Not a pleasant situation, the season did not work. I won't take it anymore. The rectangular shape gives the worst view.View Detail

Зеркала на Супер Каб Кастом подошли хорошо - они прямоугольные, что повторяют прямоугольный стиль супер каба кастом.
Они подходят как на правую так и на левую сторону - ОБРАЩАЮ ВАШЕ ВНИМНИЕ, что если вам нужны зеркала на ОБЕ стороны, то нужно заказывать ДВА (!) зеркала. В комплекте идет на сайте одно зеркало, а не комплект из двух. Это очень важно.
Прикладываю фото в сравнение со старым зеркалом: слева новое NTB Mirror, а справа - старое----------------------------------------------------------The mirrors on the super caster quicted well - they are rectangular, which repeat the rectangular style of Super Custom Custom.
They fit both on the right and left - I pay your understanding that if you need mirrors on both sides, then you need to order Two (!) Mirrors. In the kit there is one mirror on the site, and not a set of two. It is very important.
I apply a photo in comparison with the old mirror: Left new NTB Mirror, and on the right - oldView Detail

Safety riding needs good looking site example watching behind yourself The Mirror is best item for Safe riding my giorno mirror is not genuine so i want to change it im looking for circle round mirror and webike has two kind of plastic matt black and shiney chrome i dont want shine things so i choose black plastic mirrorand im so impressed the quality of product NTB has Black powder coat finished and durabilityeven i put together this mirror use 14MM rench, the Nut has not damaged GOOD PRODUCT NTB 사 의 순정대응 거울입니다 원형모양으로 플라스틱과 크롬이 있습니다 굳이 돈 더 들여 크롬으로 하기에는 주머니 사정으로 플라스틱 검정으로 했습니다 검정색 분체도색이 상당히 두껍게 되어있으며 확장 너트까지 별도로 들어있습니다 거울을 높게 장착하고 싶다면 같이 포함된 높은너트를 사용하는것이 좋겠습니다 거울은 윈덱스로 닦아주시면 표면이 깨끗하고 코팅되어 먼지가 뭍어도 왠만한 입바람으로도 날릴수있습니다View Detail

I was shipped a few days ago.very fast.very good quality.It was very easy to install.I will buy the same thing next time.View Detail

About quality and texture: I am happy with the quality of the stainless steel header pipe and satin stainless steel muffler which is finished with a unique carbon fibre end cap. About the feeling of use: Super lightweight compared to the Honda exhaust which results in a good weight saving. This muffler design is on a larger proportion for the Grom but it manages to create a big bike sound from the little 125cc motor. Products to buy together: Some form of higher flow air filter would also be desirable to purchase along side this full exhaust system, I will be going with an open air intake from Kitaco. Difficulty of installation: The process to install takes about one hour to complete. A new gasket for the forward mounting flange is recommended. Not difficult to do. Cost performance and comparison with other products: Good costing as you are receiving a well designed and manufactured product using quality materials that will help increase performance but there are also other options for much less cost, so browse Webike available exhausts if you have a lower exhaust budget. About shipping and packaging: Sea frieght is my preferred method of shipping due to the lower cost and it is fantastic that it has returned as an option once again so I can put my money toward parts and not high shipping costs. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: A JMCA approved exhaust so it is suited for everyone that needs an exhaust to my legal specifications.View Detail

About quality and texture: I am happy with the quality of the pulley holder from Kitaco made from a steel construction with a PVC coating over the band to help improve it's hold.About the feeling of use: I have used this tool to hold the clutch and flywheel on my Honda Grom when removal of these parts were required for maintenance with great success. The adjustable band makes this tool very versatile for varies sized motorcycle parts.Products to buy together: Some more tooling like a center lock nut wrench would also be desirable to purchase along side the pulley holder so when it comes time to remove the clutch assembly and oil spinner on your Honda Grom you have all the special tooling required to complete the job.Difficulty of installation: The process to install takes a few minutes, place the pulley holder around the part that needs to be held and adjust the band if required. Tighten down the T handle so that the band holder does not allow the part to spin as you undo the fastener securing the part. Not difficult to do.Cost performance and comparison with other products: Good costing as this is a quality made band holder from Kitaco that has with stood numerous usage without failure as compared to the first band hold that I purchased from another site that failed soon after.About shipping and packaging: The faster shipping options are too expensive for myself so I just have to wait for my part to arrive via sea freight. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged.Any concerns, cautions, or advice when purchasing: These band holder are limited to the sized parts they can hold. No smaller the 6cm in diameter and no larger then 12cm in diameter.View Detail

About quality and texture: I am happy with the quality of the stainless steel header pipe and polished stainless steel muffler which is finished with a unique designed end cap. About the feeling of use: Super lightweight compared to the Honda exhaust which results in a good weight saving. This exhaust system design and proportions are well suited to the Grom and it manages to generate an enjoyable exhaust note from the little 125cc motor. Products to buy together: Some form of higher flow air filter would also be desirable to purchase along side this full exhaust system, I chose to go with an open air intake from Chimera. Difficulty of installation: The process to install takes about one hour to complete. A new gasket for the forward mounting flange is recommended and modification to the rearset is needed for the third generation Grom. Not difficult to do. Cost performance and comparison with other products: Good costing as you are receiving a well designed and manufactured product using quality materials that will help increase performance but there are also other options for much less cost, so browse Webike available exhausts if you have a lower exhaust budget. About shipping and packaging: Sea frieght is my preferred method of shipping due to the lower cost and it is fantastic that it has returned as an option once again so I can put my money toward parts and not high shipping costs. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: A JMCA approved exhaust so it is suited for everyone that needs an exhaust to my legal specifications.View Detail

About quality and texture: I am happy with the quality of the titanium exhaust from Over Racing. The muffler is quite compact with a removable baffle inside and made from titanium, while the exhaust piping is very large in diameter at the exhaust port end and just continues to expand all the way up to the muffler connection and is also made from titanium. About the feeling of use: The titanium exhaust is an aggressive looking exhaust on the Grom but the exhaust note is very enjoyable to hear at idle and through the entire RPM range due to the baffling within the short muffler. Products to buy together: Some form of higher flow air filter would also be desirable to purchase alongside this titanium exhaust to help achieve maximum performance. Difficulty of installation: The process to install took about one hour, I was removing an aftermarket exhaust which was very simple as it was just the two nuts at the front and one bolt at the back but the exhaust port gasket was very difficult to remove. Cost performance and comparison with other products: High costing but you are getting a full titanium exhaust system with features to help obtain high performance at a high price as compared to the much cheaper stainless steel version available from Over Racing. About shipping and packaging: Sea frieght is my preferred method of shipping due to the lower cost and it is fantastic that it has returned as an option once again so I can put my money toward parts and not high shipping costs. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: Zero concerns or cautions on this product and the advice is to purchase if you have the money. View Detail

About quality and texture: I am happy with the quality of the sports camshaft from SP Takegawa, wonderful machining throughout and great quality bearings fitted. About the feeling of use: I was looking for a camshaft to make the 125cc engine higher revving which it has and I'm really happy with how it performs on the open road with no real loss of power in the lower RPMs which is ideal for around town. Products to buy together: Some type of fuel controller is needed to be purchase along side the sports camshaft, the SP Takegawa FICON 2 is well suited to this type of performance modification. Difficulty of installation: The process to install takes about half an hour, was an easy job to complete after reading through the Honda service manual directions. Not difficult to do. Cost performance and comparison with other products: High costing, the cheapest high RPM camshaft available here on Webike is the Endurance hi-power camshaft but does not look to have a power curve anywhere near as good. About shipping and packaging: Sea frieght is my preferred method of shipping due to the lower cost and it is fantastic that it has returned as an option once again so I can put my money toward parts and not high shipping costs. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: Webike has many camshaft to choose from and the choice is difficult, much research is required to get as close as possible to your desired performance outcome.View Detail