Used several times so far. Ordered the item for bikes chain adjustments. Colour RED. Quality is fantastic. Fitment is perfect on sprocket. DIY alignment work is easy. Highly recommended item.View Detail

It is screwdriver magnetiser / demagnetiser. So the screwdriver can have magnet function ever the screwdriver have not the magnet function. It is good function when you need to screw something on. make it conveience and the screw will not easy to loss even in the small place. The colour is not light as the product page shown. it is more sharper. I like it color very much.View Detail

[How is it used?
This cylindrical Car Wash Brush is useful for washing narrow crevices when washing a car.

Was the one you received as per Image?
The total length was longer than I expected.
Considering my carrying and storage situation, another 5 cm shorter would have been perfect.

How was your experience with it?
I forget the Manufacturer, but the diameter of the Brush is thinner than the similar product I used to use, making it easier to insert the Brush into more detailed areas.
Brush's hair is quite firm.
I don't think anyone uses it, but it should not be used on Tanks, Screens, or other areas where fine scratches caused by car wash are a concern.
As the product name says "Engine brush", it is designed to be used on areas that do not get scratched or bothered by washing.
I use it in places that are difficult to wash with Sponge or regular Brush, such as the gap between engines, the gap between spokes, and the gap between exhaust pipes.
It was a pleasant realization that not only can hard-to-wash areas be cleaned, but it is also much more efficient than washing with Dustcloth, etc., so the time spent washing the car can be reduced.

As shown in the product image, the needle Gold of the core can also be bent gnarly.
The needle Gold in the core is quite hard, so it can be washed well even when bent.

[Points to note]
Rubber cap is attached to the tip of the Gold needle, which is the core of Brush.
In the unlikely event that this is not noticed coming off, it is likely to cause serious damage to the vehicle body.
Does it have a rubber cap?" and it is safer to look at it from time to time (a similar product I used in the past had a rubber cap that came off).

*Parts that cannot be used
It cannot be used for areas that must be bent internally, such as the inside of a Handlebar Pipe.
As mentioned above, the core needle Gold bends, but it is quite stiff. It does not bend flexibly to fit the other side while inserting it into a gap.View Detail

It is useful when replacing the Gasket during engine tuning such as bore up, clutch replacement, oil cooler installation, etc.!
Old gaskets stick to the surface and are difficult to remove, so a cutter blade or similar tool is used to remove the gasket, but a scraper is more beautiful and quicker for detailed work.
The price is not so expensive, so it would be good to have one in the family.View Detail

I think this product is an essential item for cowl removal. The resin also prevents the cowl from getting wound, and it is also useful for removing the interior of the car!View Detail

About quality and texture - The standard G-Craft billet aluminium raw finish with a clear anodize that never gets old or fades.About the feeling of use - Just a beautiful part with it's etched G-Craft branding around the cap, very happy I chose this one over any of the coloured options from other brands for this location.Products to buy together - The G-Craft service hole cap and engine cap for the left engine cover are perfectly matched to this filler cap and make a great set.Difficulty of installation - Installation of the filler cap is just simply re-using the O-ring from the Honda OEM cap and tightening down by hand.Cost performance and comparison with other products - There are cheaper and more expensive billet aluminium oil filler caps from the other brands. This one looks to be priced around the mid points but don't let a few dollars either way make your decision. You should be purchasing based on the style you like the best.About shipping and packaging - Sea freight is my preferred shipping option and arrives in Australia within 8 weeks from dispatch. Always well packaged to ensure parts arrive safety and are ready for use.Any concerns, cautions, or advice when purchasing - If there isn't an oil filler cap to your liking in the Monkey 125 listing then go chechout what's available for the Grom as they will also fit.View Detail

About quality and texture - You are getting a set of billet aluminium caps with a silver anodized finish. The design looks to be well thought of with the grooves on the inside of the cap to additionally help with transfering the heat from the oil to the outside fins.About the feeling of use - The silver finish doesn't match the silver engine of the Monkey 125 so that my bother some people but not me. The caps warm up just like the Honda OEM caps but now with the fins exposed to the air flow this area can add some cooling effect to the engine oil.Products to buy together - If you have increased the performance of your 125cc engine and are still looking for more cooling then the Kitaco high mount 3 row oil cooler kit specifically designed for the Monkey 125 will be a nice additional purchase.Difficulty of installation - Installation of the tappet cap set is just simply re-using the O-rings from the Honda OEM caps and tightening down the Kitaco caps with the included allen head bolts. A small amount of oil will come out when the lower tappet cap is removed but that's nothing to worry about.Cost performance and comparison with other products - This purchase has to be the best value finned tappet cap as you are receiving 2 caps and not 1 like the finned tappet cap from G-Craft. If you just want billet caps without fins you can get them much cheaper.About shipping and packaging - Sea freight is my preferred shipping option and arrives in Australia within 8 weeks from dispatch. Always well packaged to ensure parts arrive safety and are ready for use.Any concerns, cautions, or advice when purchasing - Also available with a black anodized finish to match the black engine of the Honda Grom.View Detail

About quality and texture - This product is made up of a multitude of parts, steel material used for the base plate for the strength in case of a fall and aluminium material is used for the guard plates and protector to keep it as light as possible.About the feeling of use - With the addition of some protective items fitted to the Monkey 125 I feel more at ease knowing that if I have a small accident that the motorcycle parts will be saved.Products to buy together - Kitaco have many beautifully machine aluminium anodized parts but their left crank case cover has the ability to also protect the engine cover so is perfect to add for some additional fall protection.Difficulty of installation - The included instructions show the sequence of lining up all the parts and they simply secure to the fork guard mounting tabs with the included longer bolts. I'd also recommend using a thread locking product.Cost performance and comparison with other products - A high priced product from Kitaco but so are similar products from the likes of G-Craft. Looks like if you want fall protection with some style it will cost you some dollars but in the event they come into use will save you even more.About shipping and packaging - Sea freight is my preferred shipping option and arrives in Australia within 8 weeks from dispatch. Always well packaged to ensure parts arrive safety and are ready for use.Any concerns, cautions, or advice when purchasing - Not stated by Kitaco but these front fork guards can also be used to raise the front end of the Monkey 125 using a maintenance stand.View Detail

About quality and texture - One solid machined aluminum cover with a cool design and smooth anodized finish to hide the ugly starter motor housing.About the feeling of use - When you are using a low mount exhaust on the Monkey 125 the starter motor is no longer hidden by the exhaust pipe and this part ready dresses up the area.Products to buy together - Kitaco have many fine aluminium billet parts and one that will also dress up a poor looking Honda OEM part is the clutch cable receiver bracket.Difficulty of installation - Installation of this cover is just removing the Honda OEM mounting hardware, then positioning the spacers and cover and tightening down the included longer bolts.Cost performance and comparison with other products - Not a cheaply priced part but still more affordable then the one available from Posh and much better looking in my opinion.About shipping and packaging - Sea freight is my preferred shipping option and arrives in Australia within 8 weeks from dispatch. Always well packaged to ensure parts arrive safety and are ready for use. Any concerns, cautions, or advice when purchasing - The starter cover is not the same for all year Groms and Monkey 125 motorcycles, Kitaco have 2 versions available so be sure to select the correct one.View Detail

About quality and texture - The washers are machined aluminium with an anodized finish and the dome nuts are stainless steel which is nicer then the Honda OEM soft steel chrome version.About the feeling of use - I chose the red anodized finish to add somemore highlights to the Monkey 125 and am really liking how they look with the red highlights on the upgraded rear shocks.Products to buy together - For more red highlights adding the Kitaco aluminium key box cover to my was a must and Kitaco have many more to choose from.Difficulty of installation - Installation was no problem and all you need it a ratchet and socket to complete the job, be sure to just change one nut and washer at a time so you don't have an issue with the suspension moving.Cost performance and comparison with other products - Priced well and cheaper then the version SP Takegawa have. I also prefer the Kitaco styling of the coloured washers with the stainless nuts.About shipping and packaging - Sea freight is my preferred shipping option and arrives in Australia within 8 weeks from dispatch. Always well packaged to ensure parts arrive safety and are ready for use.Any concerns, cautions, or advice when purchasing - When you decide you are going to start adding highlighted parts like these to your motorcycle, think about all the parts you might like to add before purchasing the first one so you make the right decision about which colour to go with.View Detail