There was a time when I used a product made by another company a long time ago.
Since then, I have been riding with Normal position, but since I have switched to the method of raising Seat height etc., I felt the need to buy this product.

Most of the products at that time were anodized and came in Blue or Red, but they looked like they were simply cut out of a flat plate and did not have a very high quality feel.
The shape of this product has been designed to look very parenthesis.

I have not had any falls since I started using it, so I do not know how strong it is.
However, as long as you step on it, it seems to be sufficient and you don't feel any bruising.
Also, there was no problem with the accuracy of the screw holes, etc.
It seems that there are several types of LineUp with different Position dimensions that can be changed.View Detail

Until then, I was just using the Footpeg Up Plate for the Rear Sets, but since it was simply attached to the footpeg mounting position, the rigidity was not very good. This product has increased the rigidity of the footpeg, so that the power does not escape when you step on the footpeg, and the load can be applied firmly, so it is easier to run.View Detail

It was attached to the NSR 50 and it was easy to install. The feeling of use was also Firmly, there was no feeling of Funafuna, the bank angle did not increase much, but Position became easy and it became easy to ride.View Detail

【What made you decide the purchase?】
Because there was a difficulty in Position at the OEM footpeg position, I bought it to improve it.

【How was it actually used?】
The position of footpeg became UP & BUCK considerably, Knee grip became easier and it became easier to run.

【Was it difficult to install? (Hard parts case)】
It's easy because it's Bolt-on.

【Please tell me the point of installation and hang (in the case of Hard parts)】
Without properly tightening with a proper Hexagonal Wrench it is OK.

【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) ]
Fit of the body to the car body is now better w
My height is 178 cm and my weight is 65 kg..

[Is there anything I was disappointed about?]
None.

【Hope for Manufacturer - Please let me know if you have any improvement points]
For a tall person, I want you to make a Bracket of only BUCK without UP.

【Have you compared items?】
None.

[Others]
Material is light and luxury with Duralumin.
However, as a part for just changing the footpeg position, it feels a bit expensive.View Detail

Mounting on NSF 100.
We, 178 cm tall and long arms and legs system is very cramped at hanging Position, Boots' Size is also Large Because OEM's footpeg position shifted his feet and collapsed, the toe was scraped, "Somehow ..." I thought that I was saved by this product.
In addition to this product I additionally put the tip of OEM footpeg 1 / I have about 3 Cut. Thanks to this I can not rub footpeg even at the bank angle which makes elbows.
Currently we are considering introducing the Seat CowlBack plate to further stabilize posture in the bank.
The bad point is that the enclosed Bolt's quality is not very good. There was an uneasy response from the time of installation, the proper tool - In spite of being tightened with the proper Torque, Bolt has a tool trace attached.
It is a place where a load is applied when falling down, so it is a machine with a lot of vibration, so there will be anxiety there.
If you are going to desorb again and again, you may need to take a look at Bolt's exchange.View Detail

I se this because I bought a second hand bike and need to repair. This one is good condition and new. The shipping is good and no fold. All thing excellent, very fit for my bike. I am happy to using thisView Detail

I have many wrench. So I want to make it tidy, so I buy it. And this one is excellent, the condition is good and beautiful. I use this one to tidy up some of u wrench so I can take it out very convenient.The shipping is fast and good. No damage.My wrench is KTC and this tool is KTC, so they are fit at all. I don't know if I use other brand so can I tidy up like this. But all of my tool is KTC. That is no problem I am very to using thisView Detail

This is use for my NSR80, since the meter is only show 0-80km, but the maximum speed can go to 120km, so this is one is necessary to use. I bought it and found this is perfect and good condition with a good packing of shipping. This is the only brand have this sticker and this is easy to use , just stick it, complete! A lot of people using this sticker including some of my friend also ride NSR80 and they bought it and introduce me to bought it to stick it also. The accuracy is great. I am happy to bought it.View Detail

Since winter so I want I buy a leather glove to prevent the cold. I choose this is because it have small size and the price is cheap.However although it is small size. I am female, I still think this one is bigger compare with my hand.But it is ok to wear it, just a little big.The leather quality is good, but the protection is not good enough. And also since the size is not fit, the some protector position is changed.Anyway, it is ok and already better than others with this priceView Detail

This is Second time to buy it.The first time I bought a big one to my Msx125, now since nsr80 is a small car so I buy it and fit it with the small number board. The quality is still good and the size is very good as I want. I am so happy to get it.View Detail