About quality and textureAbout the feeling of useProducts to buy togetherDifficulty of installationCost performance and comparison with other productsAbout shipping and packagingAny concerns, cautions, or advice when purchasingAbout quality and textureAbout the feeling of useAbout DesignAbout Size ChartCost performance and comparison with other productsAbout shipping and packagingAny concerns, cautions, or advice when purchasingAbout quality and textureAbout the feeling of useProducts to buy togetherDifficulty of installationCost performance and comparison with other productsAbout shipping and packagingAny concerns, cautions, or advice when purchasingAbout quality and textureAbout the feeling of useProducts to buy togetherDifficulty of installationCost performance and comparison with other productsAbout shipping and packagingAny concerns, cautions, or advice when purchasingAbout quality and textureAbout the feeling of useAbout DesignAbout Size ChartCost performance and comparison with other productsAbout shipping and packagingAny concerns, cautions, or advice when purchasingAbout quality and textureAbout the feeling of useAbout DesignAbout Size ChartCost performance and comparison with other productsAbout shipping and packagingAny concerns, cautions, or advice when purchasingView Detail

About quality and texture - The 420 rear driven sprocket from Kitaco is made from high tensile steel with a black painted finish, the quality from the overall fit and finish is perfect.About the feeling of use - The black finish looks slick with all the other black back there. A nicer and cheaper alternative to purchasing an OEM rear driven sprocket. Sticking with the original 38 tooth sprocket in the 420 pitch for this stock engine that is used predominantly at higher speeds and preferred to stick with the original gearing to not increase the RPMs during commuting.Products to buy together - With high kilometers on the original drive chain setup, a few key products to purchase would be a 420 front sprocket and 420 drive chain as all three parts are required when there is that much wear on the three components.Difficulty of installation - The installation of the 420 rear driven sprocket is an intermediate task that took 0.7 of an hour to complete. Some mechanical aptitude and the use of basic hand tools is what is required to remove the rear wheel from the swing arm and secure the driven sprocket to the hub reusing the existing hardware.Cost performance and comparison with other products - I find the cost of all the products Kitaco sell to great value when compared to what most other companies sell their products for and the 420 rear driven sprocket is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the 420 rear driven sprocket , I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

Starkes Kettenrad, habe ich jetzt schon öfters bri den neuen Euro 5 Modellen verbaut, alle sind sehr zufrieden, stabil, schön in Farbe: Schwarz und läuft super, kann ich jedem empfehlen View Detail

About quality and texture, I can confirm that the quality is great and that the material used is S45C steel which is a high carbon steel resulting in a lighter and harder wearing part.About the feeling of use, A better looking and performing driven sprocket then the original Honda part which is the perfect choice for my Monkey 125 with the power the original engine is outputting.Products to buy together, The drive chain system on any typical motorcycle is made up of three parts that ideally are replaced together so it would be good practice to also add a front drive sprocket and drive chain to your cart.Difficulty of installation, I can say the fitment of the driven sprocket for my installation was average due to the access required but simple in nature of placing the sprocket into the hub and securing with the locking nuts.Cost performance and comparison with other products, The pricing of the product is great. You receive a sprocket made from quality and light weight material. There are no cheaper options with the lightweight design that I could find, even the original Honda part is more expensive.About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country.Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

About quality and texture, I can confirm that the quality is great and that the material used is S45C steel which is a high carbon steel resulting in a lighter and harder wearing part.About the feeling of use, The larger pitch sprocket allows for a heavier duty drive chain which was my main goal to extend the time between chain adjustments and also achieved a better looking and performing drive sprocket then the original Honda part.Products to buy together, The drive chain system on any typical motorcycle is made up of three parts that ideally are replaced together so it would be good practice to also add a front drive sprocket and drive chain to your cart.Difficulty of installation, I can say the fitment of the driven sprocket for my installation was average due to the access required but simple in nature of placing the sprocket into the hub and securing with the locking nuts.Cost performance and comparison with other products, The pricing of the product is great. You receive a sprocket made from quality and light weight material. There are no cheaper options with the lightweight design that I could find, even the original Honda part is more expensive.About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country.Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

This product is excellent condition. I Use it because of the position of my leg is not comfortable with the original one. So I install it and the position is well now. The shipping is excellent also, fast to receive so I can install it immediatelyView Detail

I se this because I bought a second hand bike and need to repair. This one is good condition and new. The shipping is good and no fold. All thing excellent, very fit for my bike. I am happy to using thisView Detail

I have many wrench. So I want to make it tidy, so I buy it. And this one is excellent, the condition is good and beautiful. I use this one to tidy up some of u wrench so I can take it out very convenient.The shipping is fast and good. No damage.My wrench is KTC and this tool is KTC, so they are fit at all. I don't know if I use other brand so can I tidy up like this. But all of my tool is KTC. That is no problem I am very to using thisView Detail

This is use for my NSR80, since the meter is only show 0-80km, but the maximum speed can go to 120km, so this is one is necessary to use. I bought it and found this is perfect and good condition with a good packing of shipping. This is the only brand have this sticker and this is easy to use , just stick it, complete! A lot of people using this sticker including some of my friend also ride NSR80 and they bought it and introduce me to bought it to stick it also. The accuracy is great. I am happy to bought it.View Detail

Since winter so I want I buy a leather glove to prevent the cold. I choose this is because it have small size and the price is cheap.However although it is small size. I am female, I still think this one is bigger compare with my hand.But it is ok to wear it, just a little big.The leather quality is good, but the protection is not good enough. And also since the size is not fit, the some protector position is changed.Anyway, it is ok and already better than others with this priceView Detail