It just does not fit properly. The bolts of the rotor do not clear the bracket, not enough room. Seriously disappointed in takegawa, thought they were better.
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
It just does not fit properly. The bolts of the rotor do not clear the bracket, not enough room. Seriously disappointed in takegawa, thought they were better.
Fits: HONDA MONKEY125 (JB03-1000001-), HONDA MONKEY125 Thai Model MLHJB02, HONDA MONKEY125 JB02-1000001-, HONDA MONKEY125 JB02
About quality and texture - Top quality. Beatuifully machined bracket here from Takegawa, light weight but super strong.About the feeling of use - Caliper mounted up with no issues and the operation of the caliper is perfect due to the well designed and produced bracket.Products to buy together - Takegawa list these parts to completed the rear caliper upgrade, Brembo 2P caliper 20.6951 and brake hose 500mm. Difficulty of installation - I found the install of just the bracket easy as the rear wheel only needs to be removed for access but for the entire upgrade to be completed difficultly level steps up to medium.Cost performance and comparison with other products - I find the rear caliper bracket a little over priced compared to the front bracket but this seems to be common with all brands. About shipping and packaging - I think Webike are doing their best with shipping pricing, so I'm happy. Packages ship within 24 hours and arrive very quickly from Japan.Any concerns, cautions, or advice when purchasing - If you are looking to upgrade the rear caliper due to a lack in stopping power then adds this to your cart along with all the other parts required.View Detail
Fits: HONDA GROM (JC61-1000001-/JC61-1300001-), HONDA GROM (JC75-1000001-/JC92-1000001-), HONDA MSX125 (MLHC618_D5000001-), HONDA MSX125SF , HONDA MSX GROM (MLHJC92)
使用车型:HONDA MSX125 GROM 2017后轮改brembo 34mm双活塞卡钳的缘故,是不能直接安装原车上的所以必须购买的转移码才能链接在原车上,材质方面铝合金,很轻!它适用于MSX125后轮改装任何品牌34MM安装孔距的对二卡钳Vehicle model: HONDA MSX125 GROM 2017The rear wheel is changed to the brembo 34mm double piston caliper. It cannot be installed directly on the original car.Therefore, the transfer code that must be purchased can be linked to the original car. The material is aluminum alloy, which is very light!It is suitable for MSX125 rear wheel modification of any brand 34MM installation hole distance two calipers(translated by Google Translator)View Detail
Fits: HONDA GROM (JC61-1000001-/JC61-1300001-), HONDA GROM (JC75-1000001-/JC92-1000001-), HONDA MSX125 (MLHC618_D5000001-), HONDA MSX125SF , HONDA MSX GROM (MLHJC92)
[How is it used?
Installed on GROM JC92.
Was the one you received as per Image?
Yes.
The texture and accuracy was excellent, just like Image.
Was the installation difficult?
When installing
? Rear wheel removal
? Rear brake removal
two points occur.
If you have a Level that can do this work without difficulty, the difficulty level is not too high.
On the other hand, I don't have the confidence to do the work in this area, the tools to do (Rear stand etc.) If you don't have one, it's better to leave it to a specialist shop.
How was your experience with it?
No problem at all
I was able to install my Brembo Caliper with no complaints, good accuracy and good quality.
[Included Parts:were they on?
Yes.
Everything I needed for installation was included.
I've used various manufacturers' rear caliper supports, and the one that came with this product is the most helpful Instruction Manual I've ever seen. (*This is my personal opinion)
I didn't have any trouble at all with the installation because the installation Torque values are well documented.
[Was there anything that disappointed you?
Not for this product.
If I had to guess, I'd say that the Grom is not easy to maintain.View Detail
Fits: HONDA MONKEY125 (JB03-1000001-), HONDA MONKEY125 Thai Model MLHJB02, HONDA MONKEY125 JB02-1000001-, HONDA MONKEY125 JB02
I bought this to replace the rear caliper with brembo.
When I think only of Caliper support, it has been put on the market from various manufacturers, but in my case, it is necessary to change Speed sensor to Rear side from the reason of changing the number of guns of Sprocket with ABS, and because this was almost the only choice made by Mukawa, Caliper This is the reason why I chose the Caliper support made by Mukawa.
If you have replaced the sensor, you only need this 1pc. bracket, so the appearance is also refreshed.
The accuracy is not a problem at all because it is made by Mukawa of trust, and the core also came out to Beauty.
I have also replaced the Swing Arm with a G-Craft one, but this can be installed without any problems.View Detail
Fits: HONDA GROM (JC61-1000001-/JC61-1300001-), HONDA GROM (JC75-1000001-/JC92-1000001-), HONDA MSX125 (MLHC618_D5000001-), HONDA MSX125SF , HONDA MSX GROM (MLHJC92)
It can also be used with JC92.
I'm using it with the new Crab.
It may vary from individual to individual, but I was able to get Center by popping it on.
The original bracket also has a gap between the claws and the Swing Arm.
It would be good to eliminate the rattling with Rubber or Gold stuff.View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
Customer Service
INFORMATION
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING