Purchased the PIAA Fog Lamp Kit for my MT09. The foglamp was done up in a very high and good quality. Installation was fairly easy as it is plug and play to the motorcycle. The instruction manual was very helpful in facilitating with the installation. Tested the lights at night and was happy with the output of the foglight. Will be using this foglight for my long trip up north in the night time.View Detail

The design and fitment of the Tenere 700 OEM Product is Exactly as you would expect from an OEM product. For installation, you just need to buy the OEM bracket and mount it on the bottom of the headlight, then remove the cowl and connect the wiring to the coupler. It is a pity that the WiringHarness is a Universal Product and the Switch is a spec. that attaches to the Handlebar with a Bracket. it is not the fault of PIAA FogLight but the problem of Motorcycle. It is not the fault of PIAA FogLight but the problem of Motorcycle. As for the durability, I think there is no problem, but I don't evaluate it because I use it less than a year, and the headlight of Tenere700 is good because I can illuminate the dark part of the front just because the low beam is too far. It's my fault for not checking, but I found out how to adjust the angle of the headlight after installation, but I'm glad I did. Recently, there are a lot of accidents between motorcycles and cars, so I wonder if I can appeal my existence by lighting up not only at night but also during the day?View Detail

I used it on my WR250X which I also use for road race. It's so much brighter than Fog light!
The light distribution is not the same as with fog, as it does not illuminate a wide area in the foreground, but rather a straight line and long distance. I think it's a great alternative to a headlight.

However, the body is larger than normal fog, so the body must be strengthened to prevent vibration and the bracket. to.View Detail

WRNumber Although we used ML1 which is a little bigger as it is made into a plate
Because it was inconvenient with one light purchase as Low beam.
Small light with sharp light and 35w light quantity personally enough.
However, because the irradiation range is narrow due to the Spot light distribution, people who are concerned may want to consider introducing Sub lamp.
Also, since there is a slightly weak feeling in vibration, if you are worried, put a Rubber board between Bracket etc etc etc. Measures may be better.
Also, for RepairValve is H3 Gold and Glass spherical form is T10 mono (PIAAOEM or Stanley electric etc etc etc. ) Can only be used.
In H3 Bulb Standard is T11. 5 to T 12 format (Small Yarn Mfg. Co. etc etc etc. ) Is not included, so be careful.View Detail

Originally I was looking for an LED bulb with low power consumption, but I purchased it by mistake.
It is due to my confirmation mistake, but search within Shop "LEDFog Lamp" It was also attributed to being displayed in.
Lamps have a well-established Brand and the light intensity is also sufficient with the Small Type, but the power consumption per unit is 35 w, which consumes considerably.
By the way OEM Front forkBracket sold from PIAA at Quantity : Pair (for Left and Right) It is attached to.
Of course it's bright if you use a total of 70 W, but as of now I have few opportunities to use.
Recommendation for those who are looking for something with luminosity in Small Type, but I will not recommend to people who are assuming to use everyday in commuting or schooling.

View Detail

My Arai Tour-cross (XD4) Break is very neat and has a good looks. It includes a new face shield design that now incorporates brow vents. A redesigned peak and refined overall shape makes the smoothest-feeling, low-drag, low-lift dual-sport helmets you’ll ever find. It is one of the lightest weight dual-sport helmets around and it has the typical Arai level of quality. Overall, this helemt is probably one of the highest quality, most wearable dual-sport helmets that I ever tried. Thanks to Webike and Seller for keeping the package in very well condition and fast delivery too!! View Detail

I am very happy and much satisfied with this rear carrier product from YAMAHA OEM. This compact and small carrier can carry most of my bags/hard case/camping equipment and most of my motor adventure equipment. It is very light and compact compare to the adventure version. And it weights lesser to the YAMAHA OEM Adventure carrier. I am recommending this all Yamaha Serow 250 owners. The shipment is fast and very reliable. The Seller provides all what was needed in my order. Thank you Webike and Yamaha!! View Detail

There was many lacking parts in my order specially for the lock/nut to the screws where the screen is fastened.. The screen cannot be fastened or hold properly to the metal bars. I installed the four female thread holder in reverse so that it can temporarily hold the screen but it is not tight. I am not satisfied with my order. I hope the seller will send to me the remaining parts so that the screen will be tight enough or secured.View Detail