?
I had these Yoshimura cams installed in my GSX 1400 '06 4 years back and it's now time to control and readjust shims. Installation needs a little adjustment on the cam holders due to the extra lift, but it's nothing serious. Can highly recommend this upgrade!
Yoshimura cams - one of the best performance boosts for the GSX1400. Cams were posted quickly, cams were very well packaged. I would recommend Webike to my friends.View Detail
The last impression was a controversial evaluation
This time, I tried increasing the fuel with the power commander
Surprisingly the acceleration in the second half was sharp and I felt dangerous
After all, the fire is Large thing
Even if you increase the fuel, the thinness of the Torque during low rotation did not change
Even considering that, it will be a fun Engine.
When you express yourself
Image like Normal engine slowly flowing down the road like cattle riding
High CamshaftEngine looks like a horse riding highway like Image
Is not it?
Together with the Silencer of the SCP Project, it is Engine that I want to turn
View Detail
Embedding was not as difficult as I thought.
I think it would be better to have Camshaft Sprocket and CamSprocketBolt ready. (Also, Vise pliers of Large eyes)
It is a slow Torque that you care about, but I say it clearly.
Bring my 1400 to 10 FACTORY and get it ECUTune back to the axle Large 13. There was 1 kgf-m. (NORMALCatalogue number 12. 8kgf-m)
At the time of low speed of Normal cam, I made a very dangerous and dangerous acceleration, but after Cam exchange, I feel fast to Smooth.
If you compare it to an animal, for example, you feel Sara Brett who was trained from a wild rampage horse (^_^;)
It may be because it is light because the fire setting is Normal cam setting
I have human ability, so I will get used to it ...
View Detail
Purchased by another company and attached to the GSX 1400. It is a combination of YOSHIMURAFull Exhaust System and Wotani PowerCoil and Icon Three adjustment. At Dyno Machine, the AR ratio is around 13, the rear wheel output is 132 PS, and the Large Torque is 14 kg - m.. I can experience acceleration with Punch until about 9200 rpm.
Since Engine Displacement Volume is originally Large, there is no feeling that low speed Torque became very thin. As for the 112PS before the exchange, it became 20PS after the exchange, so it can be said that the cost effectiveness is high.View Detail
Torque was satisfied with Morimori at medium and low speeds, but I felt it was a way of doing Daradara and Mosari in a high speed area, so I thought it was expensive Parts but replaced with YOSHIMURA Camshaft ST - 1.
It is satisfying Large as it turns pleasantly without Stress until high rotation.
I think that there are also people who feel that the lower Torque becomes thinner, but since it is originally the BigTorque of the Large Engineering Displacement Volume, even if the Torque thinned somewhat, it does not matter personally.
A friend who was negatively exchanging Cam also tried on my Motorcycle "I will also exchange Cam!" I said (Lol)View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING