About quality and texture - Top quality. The syringe has a durable plastic housing that can be reused many times even when exposed to brake fluid.About the feeling of use - When removing and adding brake fluid from the master cylinder I like to minimise the chance of brake fluid being spilt on my paint work and this syringe and hose kit suits my needs perfectly.Products to buy together - The brake air bleed set from Daytona is perfect to purchase together with this syringe kit so all your brake bleed needs are covered.Difficulty of installation - The syringe kit is easy to assemble from the included items and even easier to use to extract and inject whatever fluid is needed.Cost performance and comparison with other products - With the inclusion of the hose and zip tie I find the syringe kit good value for a product that can be reused multiple times and comparing to the other kits available here on Webike, it's also the best value.About shipping and packaging - Sea freight is my preferred shipping option and usually arrives in Australia in 6 to 8 weeks from dispatch. Always well packaged to ensure parts arrive safety and are ready for use.Any concerns, cautions, or advice when purchasing - The included hose is only 15 cm long, so depending in your intended use it might also be worth adding some additional hose to your order.View Detail

Used several times so far. Ordered the item for bikes chain adjustments. Colour RED. Quality is fantastic. Fitment is perfect on sprocket. DIY alignment work is easy. Highly recommended item.View Detail

[How is it used?
This cylindrical Car Wash Brush is useful for washing narrow crevices when washing a car.

Was the one you received as per Image?
The total length was longer than I expected.
Considering my carrying and storage situation, another 5 cm shorter would have been perfect.

How was your experience with it?
I forget the Manufacturer, but the diameter of the Brush is thinner than the similar product I used to use, making it easier to insert the Brush into more detailed areas.
Brush's hair is quite firm.
I don't think anyone uses it, but it should not be used on Tanks, Screens, or other areas where fine scratches caused by car wash are a concern.
As the product name says "Engine brush", it is designed to be used on areas that do not get scratched or bothered by washing.
I use it in places that are difficult to wash with Sponge or regular Brush, such as the gap between engines, the gap between spokes, and the gap between exhaust pipes.
It was a pleasant realization that not only can hard-to-wash areas be cleaned, but it is also much more efficient than washing with Dustcloth, etc., so the time spent washing the car can be reduced.

As shown in the product image, the needle Gold of the core can also be bent gnarly.
The needle Gold in the core is quite hard, so it can be washed well even when bent.

[Points to note]
Rubber cap is attached to the tip of the Gold needle, which is the core of Brush.
In the unlikely event that this is not noticed coming off, it is likely to cause serious damage to the vehicle body.
Does it have a rubber cap?" and it is safer to look at it from time to time (a similar product I used in the past had a rubber cap that came off).

*Parts that cannot be used
It cannot be used for areas that must be bent internally, such as the inside of a Handlebar Pipe.
As mentioned above, the core needle Gold bends, but it is quite stiff. It does not bend flexibly to fit the other side while inserting it into a gap.View Detail

It is useful when replacing the Gasket during engine tuning such as bore up, clutch replacement, oil cooler installation, etc.!
Old gaskets stick to the surface and are difficult to remove, so a cutter blade or similar tool is used to remove the gasket, but a scraper is more beautiful and quicker for detailed work.
The price is not so expensive, so it would be good to have one in the family.View Detail

I think this product is an essential item for cowl removal. The resin also prevents the cowl from getting wound, and it is also useful for removing the interior of the car!View Detail

This product is excellent condition. I Use it because of the position of my leg is not comfortable with the original one. So I install it and the position is well now. The shipping is excellent also, fast to receive so I can install it immediatelyView Detail

I se this because I bought a second hand bike and need to repair. This one is good condition and new. The shipping is good and no fold. All thing excellent, very fit for my bike. I am happy to using thisView Detail

I have many wrench. So I want to make it tidy, so I buy it. And this one is excellent, the condition is good and beautiful. I use this one to tidy up some of u wrench so I can take it out very convenient.The shipping is fast and good. No damage.My wrench is KTC and this tool is KTC, so they are fit at all. I don't know if I use other brand so can I tidy up like this. But all of my tool is KTC. That is no problem I am very to using thisView Detail

This is use for my NSR80, since the meter is only show 0-80km, but the maximum speed can go to 120km, so this is one is necessary to use. I bought it and found this is perfect and good condition with a good packing of shipping. This is the only brand have this sticker and this is easy to use , just stick it, complete! A lot of people using this sticker including some of my friend also ride NSR80 and they bought it and introduce me to bought it to stick it also. The accuracy is great. I am happy to bought it.View Detail

Since winter so I want I buy a leather glove to prevent the cold. I choose this is because it have small size and the price is cheap.However although it is small size. I am female, I still think this one is bigger compare with my hand.But it is ok to wear it, just a little big.The leather quality is good, but the protection is not good enough. And also since the size is not fit, the some protector position is changed.Anyway, it is ok and already better than others with this priceView Detail