?
Looks like you access from European region.
Would you shop at webike.eu.com?
Good sealed - Low friction - Smooth movement
I have replace SKF fork seal for my CB400sf and it much better than the OEM.With it low friction design the fork move smoothly and even though it still remain good sealed from dust from outside and oil leak from inside.Highly recommended.Best
Helpful?0
Fits: HONDA CB400SF 92-13, HONDA CB400F (2013-) 13, KAWASAKI Z1000 (water-cooled) 03-14, HONDA CB1100 10-14, HONDA HORNET250 96-07
SKF use and other FCB400T rebuild
It is effective, returns tightly, and stabilizes the sag.
CB400TOil is not for Cartridge but dare YamahaG15
The oil level is lowered and Spring is not changed. The protrusion is 8mm.
Tire Grip chases Full Bottom at the very limit of no collapse.
Is it SlideMETAL's discomfort or Seal's discomfort?
Seals will no longer be uncomfortable.
We have changed all of them on past vehicles and they are surprisingly durable.
It is highly reliable and recommended as a separator part.View Detail
Helpful?
Fits: HONDA CB400SF 92-13, HONDA CB400F (2013-) 13, KAWASAKI Z1000 (water-cooled) 03-14, HONDA CB1100 10-14, HONDA HORNET250 96-07
it's the best
I knew they were good because I had used them in the past, but I felt that the new ones were different. I was surprised at how little friction there was when I installed and operated it.View Detail
Helpful?
Fits: HONDA CB400SF 92-13, HONDA CB400F (2013-) 13, KAWASAKI Z1000 (water-cooled) 03-14, HONDA CB1100 10-14, HONDA HORNET250 96-07
Expensive but good quality
It's expensive, but it's good.
If you don't have confidence in your installation, it's best to leave it to the store.
Only the Dust Boots have a different structure from the OEM, so I'm not sure how durable they are.
It's been a year and there are no abnormalities.View Detail
Helpful?
Fits: HONDA CB400SF 92-13, HONDA CB400F (2013-) 13, KAWASAKI Z1000 (water-cooled) 03-14, HONDA CB1100 10-14, HONDA HORNET250 96-07
Better than OEM
The green color of the seal will give you a sense of satisfaction after replacing it.
It has less drag resistance than the OEM, but whether it moves the legs better is a mystery.
You may have to go to Circuit to find out,...View Detail
Helpful?
Fits: HONDA CB400SF 92-13, HONDA CB400F (2013-) 13, KAWASAKI Z1000 (water-cooled) 03-14, HONDA CB1100 10-14, HONDA HORNET250 96-07
No recommendation
I installed it on a '96 RGV-& Gamma;250SP.
It fits into the outer tube with little or no resistance when the seal is inserted.
I doubt very much if it can be sealed properly.
After a little bit of driving after installation, it started to bleed.
Quantity:Pair (for Left and Right) It doesn't seem to be a work error as they are both blotted out.
Perhaps they are loosening the adherence of the Oil Seal to the extreme.
The site of Technics mentions the durability, but it's a laughingstock.
The key performance also felt less effective for this Gold amount.
It's not cheap, so you have to pay attention to the quality.View Detail
Helpful?
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING