Close

Fit Model Information

logo product

Condor Φ7/8" Handlebar Steel

 Product # HB0020C-01
4.6 (Read 27 Reviews)
HONDA YAMAHA SUZUKI KAWASAKI Others
Maker Model INFORMATION
HONDA APE 100 -12 (drum brake)*APE100 (09-) requires drilling of switch holes.
HONDA VTR250 03-07 MC33 (1020001-)*Processing of switch hole required|* Required side cap (for 18mm ID)
HONDA NC700S 12 (except for ABS and DCT cars) *Processing of switch hole is required|* Required side cap (for 18mm diameter)
HONDA FTR223 (with side numbers) * Requires modification of the clutch cable and choke cable.
HONDA FTR223 (without side numbers) * Requires modification of the clutch cable and choke cable.
HONDA CB750 04- RC42 *Processing of switch hole required|* Required side cap (for 18mm ID)
HONDA CB400SF -98 NC31 *Processing of switch hole required|* Required side cap (for 18mm ID)
HONDA CB400SS *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
HONDA MONKEY 84-07 (Z50J-1600008-|AB27-1000001-1899999)*With Top Bridge H30 Holder or MONKEY Handle Holder required
HONDA MONKEY 09-12 (AB27-1900001-)(FI)(FI cars)* Requires Top Bridge H30 Holder or MONKEY Handle Holder|* Requires drilling of switch hole
HONDA HORNET250 *Need to drill switch hole
HONDA APE 50 08-12 (FI Drum Brake) *Processing of switch holes is required
HONDA APE 50 -07|08 (Carburetor)*APE100 (09-) only
HONDA CB1300SUPER BOLDOR 10-12 *Processing of switch holes required|* Required side cap (for 18mm ID)
HONDA CB1300SUPER BOLDOR 05-09 *Processing of switch hole required|* Required side cap (for 18mm ID)
YAMAHA SR500 88-00 (CV carburetor) *Processing to drill switch holes is required
YAMAHA SR400 88-00 (CV carburetor) *Processing to drill switch holes is required
YAMAHA SR400 01-12 (Carb/FI Disc Brake Car) *Processing of switch hole is required
YAMAHA XJR400R 01-07 RH02J *Processing to open switch hole required|*Side cap required (for 18mm diameter)
YAMAHA TW225E 00- (Disc Brake Car) *Processing of switch hole is required
YAMAHA TW200E 00- (Disc Brake Car) *Processing of switch hole is required
YAMAHA TW200E -99 (drum brakes)
YAMAHA TW200 -99 (drum brakes)
SUZUKI GRASS TRACKER Big Boy 09-12 (FI car)*You can use stock side caps.
SUZUKI GRASS TRACKER Big Boy -08 (Carburetor)*Drilling of switch holes is required. |*It is necessary to change the throttle cable, clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo.
SUZUKI GRASS TRACKER 09-12 09-12(FI cars)*Side caps can be used with the stock ones.
SUZUKI GRASS TRACKER -08 (Carburetor)*Drilling of switch holes is required. |*It is necessary to change the throttle cable, clutch cable and brake hose. |*It is necessary to change the direction of the brake banjo.
SUZUKI GSX400 05-07 GK7CA *Processing of the switch hole is required|* You can use the normal side cap.
SUZUKI ST250 E Type -07 NJ4AA *Requires switch hole drilling|*Side caps can be used as standard. |*You need to change the direction of the brake banjo.
SUZUKI ST250 -07 NJ4AA Carburetor *switch hole drilling required|*Side caps can be used with stock. |*You need to change the direction of the brake banjo.
SUZUKI RV200 VANVAN -07 NH41A Carburetor *Processing to open switch holes required|* The stock side caps can be used.
SUZUKI GSR400 -12 *Ask to drill switch holes|* Normal side caps can be used.
KAWASAKI W800 *Need to drill switch hole |*It is necessary to change the clutch cable.
KAWASAKI W400 *Required Switch Hole Drilled
KAWASAKI 250TR -06 *Processing of switch holes required
KAWASAKI ZEPHYR750 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
KAWASAKI ZEPHYR400 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
KAWASAKI ESTRELLARSCustom 96-99 *Processing of switch hole required|* Required side cap (for 18mm ID)
KAWASAKI ZRX400II *Requires drilling of switch hole|*Applicable side cap (for 18mm dia.)|*Cannot be installed on models 05 and later due to interference with the cowl.
KAWASAKI ZRX400 -04 *Processing to drill switch holes is required|* Required side cap (for 18mm I.D.)|*Not available for the models after 05 due to interference with the cowl.
KAWASAKI ZRX1200R *Requires drilling of switch hole| * Requires side cap (for 18mm diameter)
KAWASAKI ZRX1100II *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
KAWASAKI ZRX1100 *Requires drilling of switch hole| * Requires side cap (for 18mm diameter)
KAWASAKI BALIUS2 *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
KAWASAKI ZEPHYRX *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
KAWASAKI ZEPHYR750 RS *Requires drilling of switch hole|* Requires side cap (for 18mm diameter)
Others Universal

Model Page Links