I replaced the NORMAL brake lever on my CBR1000RR SC77 2017, but after the replacement, the Touch hit the switch box even when the adjustment screw was tightened the most, which I did not like, so I went back to NORMAL.
View Detail
- Instock
85.11 USD (13,278 JPY)
Webike Point: +133 pt
(0.85 USD)
Delivery Information
In Stock : 3 left, Ships within 24 hours.
Estimated arrival date around
FITMENT
HONDA
Open Fit Model Information Table
-
CBR1000RR
04-20
-
CBR1000RR
08-20 (ABS)
-
CB1000R
18-19
-
CBR600RR
07-13
See all
HONDA
Product detail
[Color] Black
[Lever size] Stock size
[Lever type] RS type
**Use RS type remote adjusting wire.(Stock type cannot be used.)
*The remote adjustment wire cannot be installed on CBR1000RR '08 model or later because it comes in contact with the meter.
*Installation image is for reference only.
*There may be changes in product specifications due to the manufacturer's reasons.
.
* The image is only for reference. The image shown may differ from the actual product.
Adjustable billet lever for finer and wider lever position adjustment than stock.
You can set the position that best suits you without changing the feel of the lever.
Using the know-how gained from domestic and international races, including the All Japan Road Race Championship, the three-dimensional cutting process improves the fit and operability of the fingertips.
The most suitable lever type is set from three types depending on the model.
Enjoy comfortable lever control not only for racing but also for street use.
[Type: RS]
Products that boast an overwhelming share of the Asian Road Race Championship and All Japan Road Race Championship.
The lever body is shaped like a power lever and the surface where the fingertips touch is flattened, making it easy to pull forward for better control.
[Type: RS2]
Developed for use in racing vehicles.
The shape of the holder supporting the lever has been reviewed in response to the comment that the lever is too far from the SS vehicle.
In addition, the plunger has been improved so that you can feel the click of the position adjustment strongly even through the glove.
Depending on the model, there is a wiring hole to prevent the pivot pin from falling out.
[Type: Standard]
This is a long-selling model that has been supported by riders who prefer this type of bike with a loose lever lift angle.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
MODEL PAGE LINKS
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Fits:HONDA CB1000R 18-19, HONDA CBR600RR 07-15 (ABS), HONDA CBR600RR 07-13, HONDA CBR1000RR 04-20, HONDA CBR1000RR 08-20 (ABS)
Fits:HONDA CB1000R 18-19, HONDA CBR600RR 07-15 (ABS), HONDA CBR600RR 07-13, HONDA CBR1000RR 04-20, HONDA CBR1000RR 08-20 (ABS)
Jun 17, 2013
[Webike Monitor] The
rigid feeling is felt. A feel is also good touch.The
Adjuster is likely to hit a Meter --
Although it is not showy, isn't it good for a simple short lover?
![[Webike Monitor] The rigid feeling is felt. A fe...](http://global-fs.webike-cdn.net/catalogue/images/75349/RS_BL_1107250_TS.jpg)
Helpful?
Fits:HONDA CB1000R 18-19, HONDA CBR600RR 07-15 (ABS), HONDA CBR600RR 07-13, HONDA CBR1000RR 04-20, HONDA CBR1000RR 08-20 (ABS)
Apr 16, 2012
It purchased simultaneously with a Clutch lever.
Even if exchanged, there is also no touch which changed to a feeling of operation, and it has used it.
Adjustment is done more finely than a pure thing.Although the black-and-white picture of the
> description was slightly hard to see, exchange was completed simply.Since the application of the Silicon grease was directed at the time of
attachment, the thing of the DAYTONA was used.
Helpful?
Apr 4, 2021
Is this one of the best choices for Retractable Lever?
[How is it used?
About 3 years have passed since the installation.
Was the one you received as per Image?
As per Image.
Was the installation difficult?
If it is a Nisshin-made MASTER, the work is relatively easy because it is only Lever replacement.
How was your experience with it?
Because the chamfer of Lever is Small Spec. against OEM, there was an uncomfortable feeling in the first grip. If it is an extreme expression, it is like changing from a round bar to a square bar. Well, you will get used to it as you continue to use it, and now it is within the acceptable range.
It is useful when the thickness of the gloves changes between winter and spring/summer because the fine adjustment is effective by the Dial type compared with the large Lever position adjustment of OEM.
The lever is foldable, but so far I haven't had any problems with the shaft coming loose and rattling.
The adjustment Dial is weak, but I can appreciate that there is a sense of Click.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
It is a hassle to replace it, but it is better to clean and apply Grease thoroughly.
Helpful?
Fits:YAMAHA YZF-R1 15-21, YAMAHA YZF-R1M 15-21
Apr 4, 2020
I bought it because I wanted to put a remote adjuster on it
I can use it with no problem, but the Lever ratio changes when I change from OEMLever and it becomes a little hard It is
i wish it was a variable lever ratio like the bremboRCS
Helpful?
New Custom Articles
