Once you select the option, estimate delivery time will be displayed.
*Shipping date and Estimate time of arrival are not guarantee.
Once your orders are placed, we will check the stock of manufacturer and send you the confirmed Shipping time via e-mail.
*The DRC short lever is slightly shorter than the stock lever for ease of operation. *Size is the distance from the center of the mounting bolt hole to the tip of the bolt.
Reasonable replacement levers for off-road bikes. Suitable for a wide range of vehicles from motocrossers to trail vehicle.The package is one side at a time, so it's easy to choose for repair when it's damaged by a fall.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
[How is it used? I purchased the Short Type because there was some interference when installing the Hand guard on my KDX220SR.
Was the one you received as per Image? Image street with the same Design as OEM Product.
Was the installation difficult? It's a simple job to remove the Bolt and Nut, align the opening of the Bolt for grip width adjustment, remove the Wire, and install it in the reverse order. If you apply Grease to the moving parts and contact parts, the movement will be smoother and there will be no unpleasant creaking sound.
How was your experience with it? It may be uncomfortable for the person who operates it with four fingers because it makes it to Short lever, but there is nothing uncomfortable in the operation feeling that is the same as OEM for me. If you don't want to add Guardetc., please choose the Type that suits your operation method.
[Included Parts:were they on? None, Lever only.
[Was there anything that disappointed you? The price is cheaper than OEM Product, and the shape is OEM Product standard, and you can choose between Standard and Short Type. If you're running in the mountains or at a course, it's even safer to have another spare.
0Other items that may be useful include Point and hang of installation "Apply a small amount of grease to the moving parts and install as the OEM Product was installed." Only. LargeStrong, it's not difficult.
[Availability and clarity of the Instruction Manual Did you see anything on the back of Package? It's hard to find a more straightforward product, isn't it? It is such an easy to understand product.
[Notes] Make sure you buy a Lever that is compatible with your Motorcycle.
[ITEMS TO BUY TOGETHER Of course, like me. "Hand guard interferes." If this is the reason, you should buy a similar brake lever for the Right Side.
[Opinions and requests to Manufacturer It's cheap, comes in two different lengths, and has a wide range of lineups, so there's not much to say. Thank you for your continued support.View Detail
[How is it used? I keep it in my Parts box as a spare.
Was the one you received as per Image? As per Image, Lever has always bought this series from DRC. They are usually cheaper than OEM Parts and often in stock, which is a big help.
Was the installation difficult? I haven't used it yet, but I just need to remove one Nut and one Pivot bolt1 pc. It is a good idea to clean and Grease up at that time. It's pretty dirty, and if there's sand in it, it can be abrasive and make the Holder thin and rickety.
How was your experience with it? Lever in DRC is no different than OEM, so no problems there.
[Included Parts:were they on? None
[Was there anything that disappointed you? Not particularly
Other items that would be helpful Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer I've already written about it, but it's cleaning Grease up, because Clutch operation is important for Off cars.View Detail
DR250S (1992) I installed a Shortver on the I had to replace the Brake Side when it broke from a standing joke. The Clutch Side is replaced at that time because the OEM lever interferes when installing the ACERBIS Handgirth. The exchange took about 10 minutes with no problems. It is cheap and excellent as Repair Parts, so you can Recommendation.View Detail
It's for DJEBEL, but I can't pimp it out. When you set the lever, the angle part of Lever is changed to fit the hole. You need to delete it in File View Detail
The Clutch lever on my used TS125R was quite wobbly, so I replaced it. You'll be able to operate the device securely and I'm also less tired. It's a safe brand.View Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!
?
