Once you select the option, estimate delivery time will be displayed.
*Shipping date and Estimate time of arrival are not guarantee.
Once your orders are placed, we will check the stock of manufacturer and send you the confirmed Shipping time via e-mail.
*The DRC short lever is slightly shorter than the stock lever for ease of operation. *Size is the distance from the center of the mounting bolt hole to the tip of the bolt.
Reasonable replacement levers for off-road bikes. Suitable for a wide range of vehicles from motocrossers to trail vehicle.The package is one side at a time, so it's easy to choose for repair when it's damaged by a fall.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
[How is it used? Mounted on D Tracker. Applications:Motard race, FlatDirt Used for about 2 years. Many times overturned.
Was the one you received as per Image? As you can see in the image, it has a short lever, which is perfect for my small hands. Also, the size of the hand guard can be installed.
Was the installation difficult? The installation is not difficult, but it does require some tools and some adjustment of the clutch. However, since the lever replacement is an introductory step for Custom, if you are well informed, prepared, and have the tools, you will be ready for any battle.
How was your experience with it? First of all, the hand guard installation was successful and secure. However, the feeling of operation was not good at all. When I think about it now, I wonder how I used it for about two years. I thought it was perfect for my small hands, and it was certainly better than the OEM, but since the lever position could not be adjusted, I just kept using it. I regretted that I should have used ZETA's Pivot lever, because the lever position is also adjustable for the clutch, and I replaced it later. Lever is bothered by the lack of control and I can't focus on it. If you are like me, I recommend that you install a lever that can be adjusted in position.
[Included Parts:were they on? None
[Was there anything that disappointed you? None
Point and hang of installation Glasses Wrench in Size8 or 10 (Spanner) Is Quantity:You need to be prepared because you will need 2pc. Grease is fine for lubricating the clutch lever after installation, but applying a thin layer will keep dust adhesion to a minimum. If you don't like dust sticking to your fish, you can apply dry lube such as Kure's Dry fast lube, WAKOS' Bidas Dry, etc. on a regular basis. For MOTARD with off-road driving, it may be better to apply dry rubs.View Detail
[How is it used? Mounted on D Tracker. Applications:Motard race, FlatDirt Used for about 2 years. Many times overturned.
Was the one you received as per Image? As shown in the image. Since my hands are so small, I needed a lever position adjustment mechanism and a short lever to attach the hand guard.
Was the installation difficult? The installation is not difficult, but it does require some tools and some adjustment of the clutch. However, since the lever replacement is an introductory step for Custom, if you are well informed, prepared, and have the tools, you will be ready for any battle.
How was your experience with it? TRAIL (MOTARD) The size and lever position adjustment mechanism were good, but I felt that it slipped and the operation feeling was not so good. After installing this, I regretted that I should have used ZETA's Pivot lever. I regretted it. Also, I have small hands. (Glove sizeM) The OEM lever is often difficult to use, but this product allows you to adjust the lever position to a position where you can operate it properly. The ability to operate the lever firmly leads to safe riding, so we recommend that those who have trouble operating the lever because their hands are too small should introduce products with adjustable lever positions, including this product.
[Included Parts:were they on? None
[Was there anything that disappointed you? None
Point and hang of installation Glasses Wrench in Size8 or 10 (Spanner) Is Quantity:You need to be prepared because you will need 2pc. After installation, lubricate the clutch lever with grease. (Lithium, Urea, Siliconetc.) However, by applying a thin layer, dust adhesion can be kept to a minimum. If you don't like dust sticking to your fish, you can apply dry lube such as Kure's Dry fast lube, WAKOS' Bidas Dry, etc. on a regular basis. Dry rubs may be a better choice for MOTARDs with Dirt driving.View Detail
[How is it used? I installed it on my D Tracker 125.
Was the installation difficult? It's easy with Bolt On. Grease up is a must for areas where friction occurs. If you don't grease it up, it will feel like it's stuck when you grip it.
How was your experience with it? It looks like the OEM has been shortened as it is, so there is no particular change. I think the shorter length makes it harder to break because it doesn't touch the ground when you fall.View Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!
?
