Round Oil Cooler System

It's very obvious. (Translated, ∀ ´)

Fits:KAWASAKI ZZr1100

Japanese Webike user

Very Good

Oct 28, 2020

I've always wanted to be an Oil cooler!
Speaking of Custom, Oil cooler!
Cars and Motorcycles are cool, and the coolest thing about them is the outside Oil cooler!
Even though I had that thought, it was hard to get to the Oil cooler.
Especially in ZZr1100, there is a condition that Under Cowl cannot be put on, and since I knew that it becomes impossible to return to Full Cowl, I was considerably troubled. ( ?•ω•? )

I took the plunge and changed it, and I was still very possessive.
I don't know about the performance because it's almost winter.

Helpful?

Japanese Webike user

Excellent

Sep 27, 2020

Installed on ZZr1100D

Under Cowl needs to be machined. Mounting points are required for Quantity:Pair (for Left and Right) I made the Guard by myself. Please refer to the picture. The shape is beautiful.

Helpful?

Cooling performance is very good

Fits:YAMAHA XJR1300 -06, YAMAHA XJR1200 -06

Japan User(translated)

Excellent

Mar 14, 2016

Along with EngineBore up, I upgraded the capacity of Oil cooler and chose 13 steps.
We expanded the Engine Displacement Volume from 1188 cc to 1314 cc, but in the winter (Around 5 degrees of outside air) In the urban area of ??the city, two sheets of Tape are pasted and the oil temperature is about 90-degrees.
Although it is also described in the manual, the cooling performance is demonstrated at a speed of 100 km or more.
On the contrary, those who frequently use highways in Normal engine are more likely to become over cool, and they are Oil cooler with excellent cooling performance.
The cutting angle of the Handlebar was originally changed to a cutting angle that the Handlebar Lock would work so it was possible to install without problems.

Helpful?

It is pleasing also in Design.When he bought it, it worried with 13 steps, but this Type is enough.

Fits:YAMAHA XJR1200 -06, YAMAHA XJR1300 -06

Japan User(translated)

Very Good

Jul 30, 2012

Helpful?

Fits:YAMAHA XJR1300 -06, YAMAHA XJR1200 -06

Japan User(translated)

Very Good

Mar 2, 2009

Plot round oil cooler 13ROW was attached to XJR1300.
Surely it was efficacious.
Although heat softened fairly, 1300 cc of air cooling is still hot.
It is useless if expected extremely.
However, an effect can be felt.
If it attaches then and a wheel will be turned, it will hit the attachment stay of the oil cooler upper part.
The piece angle of a handle becomes small as if attached stay is attached to the place of a handle lock.
It deleted slight attachment stay of the upper part of an oil cooler, without attaching, and I coped with it.
A handle piece angle is also the same as before now.
If mufflers are exchanged since 13ROW is large, it may interfere in next cautions at the main part lower part of an oil cooler depending on a model.
Certainly [ parenthesis / to which appearance became good when attaching this oil cooler ].
A price should be just cheaper.