[Size]
Width: 689mm
Height: 57mm
Depth (Opening): 127mm
Outer Diameter: Φ22.2
Inner Diameter: 14mm (Aluminum), 18.2mm (Steel)
Standing Angle: 73-degrees
Aperture Angle: 29-degrees
Compared measurement to the STD Parts: 7mm Up/7mm Back
[Weight] 550g(Aluminum), 900g(Steel)
[Specification]
Hole Processing: Switch Hole Processed
Clutch Cable (Hose) Correspondence: Available
Throttle Cable Correspondence: Available
Choke Cable Correspondence: Available
Brake Hose Correspondence: Available
[Country of Origin] JAPAN
Comfortable to Position by making NORMAL ratio about 10mm in front.It is Exclusive Design.
The STD Handlebar shape is Base and the Grip part is translated in parallel Design angle is the same as NORMAL etc. It is possible to form a good quality Riding position without damaging Image.
● EFFEX model specially designed original designHandlebar
Set to Large Global model of Adventure and Cruiser modeletc. Original designHandlebar which realized good quality Riding Position within the range where OEMHose/Wire kind can reach while NORMALDesign is Base.
● Cable replacement is unecessary.
Because the model Exclusive Design, "I do not know until installing it ..." There is no worry such as.
* Depending on the model, there may be cases when you need to change Cable classification at the Smallest limit.
* "High" As for Cable sorts, it may be necessary to exchange.
● Processed Switch Hole
No troublesome work and extra expense such as position determination and tool preparation are needed anymore.
* Depending on the model, there may be no Switch hole.
● Quantity Lever holder:Pair (for Left and Right) To shift to
Designed a mounting straight line about 5mm longer.
It is possible to finely adjust the grip position of Lever.
"Bolt On Handlebar exclusively for car models"
STD Handlebar Design to Base, Grip part translated Design.
Since the angle is the same as NORMAL etc., you can form a good quality Riding position without damaging Image.
*It contains bar end in this product.
*It is impossible to use STD parts, and the handlebar weight is usable in each type (for aluminum handlebar/for steel handlebar).
*It does not require replacement of the brake hose and cable.
*It is impossible to use OEM handlebar end. Please use EFFEX handlebar weight (Aluminum: inner diameter Φ14, Steel:).
*There are cases that it might be different from the overall width of the vehicle verification description depending on the model.
? 
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING