[Set components] ・Pulley body x 1 ・Ramp plate x 1 ・Slider x 3 ・Weight roller 7.5g x 6 (Outer diameter Φ15 x width 12mm)
*The weight roller included is for stock exhaust and stock engine.If you have replaced with a commercial exhaust or big bore, please adjust the total weight appropriately according to your bike customization. *Be sure to use a weight roller of the Daytona specified size (outer diameter Φ15 x width 12mm). *Please check the model name, grade, registration model, year of manufacture (not the year of sale / purchase), frame No., engine No., carefully to select the correct product.Be especially careful with used vehicles that have had exterior modifications.
The acceleration performance which can be satisfied although attached WR is somewhat lighter was obtained.After engine rotation went up, it came to depart, and depression of Power who suited 25~40 km/h was also canceled.View Detail
A low-speed valley is lost and it is very satisfactory.I think that it is recommended at a handy price also in price. > attachment is easy if careful of binding a Nut tight for an One way clutch Along with a Spline.View Detail
It attached to the yamaha grand axis. Since it had damaged the pulley in trouble although the front had attached the thing of the chameleon factory, it was made into the thing of a daytona this time. Since the seal is contained in the place of the receptacle of a boss compared with a chameleon factory, it is kind touch. Since simultaneous exchange also of the belt was carried out to the short type this time, a comparison is as good touch as riding although it cannot do. It was cheaper than the chameleon factory and I thought that structure was also good. If it begins to tamper also with a drive-line, it is interesting, but a balance is difficult.View Detail
It carried out bolt-on to 5FA3. As for other converting points, only the DAYTONA red box CDI is. In the attached weight roller, rotational frequency went up too much in front of clutch in, and since standup acceleration was not quite satisfactory, it was made somewhat heavy. Although the maximum high speed was almost changeless, the inside low speed became quite fine. Since it was exchange after a 6000-km run, shortly, I use a belt as a new article and try it.View Detail
Daytona quality and texture is very good .The slow speed to top speed is much batter than oem.(with dr pully 12g)Difficulty of installationCost performanceis good not expensive .Webike shipping is fast and packaging is good.View Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!