*Please check the model name, grade, registration model, year of manufacture (not the year of sale / purchase), frame No., engine No., carefully to select the correct product.Be especially careful with used vehicles that have had exterior modifications.
Pulley body + lamp plate set. The angle of the weight roller movement inside the ramp plate and the inclination position are designed exclusively for each model, and the maximum speed is increased to the V-belt limit which could not be realized with the stock ramp plate, and at the same time, the sharp rise acceleration in the low speed range is realized. Fluorine coating finish on the roller grooves.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
It was Large strange that the Screw was cemented to the Pulley installation but it was easy to install if the hard Screw went off.
Together with reinforcement Belt, 9. When I tried running with 5 g x 6 Weight, I got 55 km / The maximum speed which was h was 65 km / H. Looking at Tachometer, it seems that the revolution speed is still going to rise, so if you upgrade the carburetor, CDI, Exhaust Chamber, Bore up and other Power up, the maximum speed is likely to grow still more.
Stable DAYTONA again, I did a nice shopping.View Detail
Perfect for the Honda dio. Particularly liked the table with the recommendations of the manufacturer, the selection of the weight rollers. Good kakchestvo working surfaces. thanksReadView Detail
Perfect for the Honda dio. Particularly liked the table with the recommendations of the manufacturer, the selection of the weight rollers. Good kakchestvo working surfaces. thanksView Detail
The live broadcasting DIO SR which I had yielded from a friend was equipped. The weight roller is putting in the thing as directions of a daytona. Although 45 km/h of the maximum high speeds did not come out by quite old motorcycle, it came to come out to 55 km/h. It seems that moreover, acceleration becomes smooth and became another vehicle. It is very satisfactory. Tampering with a motorcycle was simply completed, when I, beginners, also had a pulley desorption holder for exclusive use in attachment. In my case, although it came to come out to 65 km/h eventually by otherwise exchanging a V belt, a clutch, etc., the exchange to a high speed pulley was the most moving too. Merit of the maximum high-speed up and acceleration! It is recommended.View Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!