Size:OutlineOverall Length:220X overall height:140X overall width:100
·Exchangeable sealing gasket:Oxford300D
•Product Content:Motorcycle Cover,Storage Bag
■Manufacturer Warranty Period:Initial defect (within 1 month from the date of purchase)

**No heat-resistant fabrics are used.
*When removing and installing the cover, be careful that the buckle does not come in contact with the exhaust of the vehicle.
*The front and rear of the cover can be marked by the handle or by the Kaedea logo around the locking hole on the rear side.
*The size fit chart is calculated based on the manufacturer's published vehicle sizes.
*Please check your car size before purchase.
*Size may need to be increased depending on specifications and usage conditions.
*The bike cover should be hung from the front for smooth operation.
*Bike covers deteriorate over time by protecting the bike from direct sunlight, wind, rain, sand, and dust.
*In high winds, wind may enter the cover. Please take sufficient care to prevent the cover from tipping over.
*The manufacturer is not responsible for any damage to the vehicle caused by the customer's handling.
*The manufacturer's warranty does not cover any damage or sizing other than the initial defect of the bike cover.
*Other sizes and products may be included in the images.
*Please note that the product specification may change due to manufacturer reasons.
.

[WeatherShield]
Motorcycle Cover that combines design, functionality, and security.
One layer of lightweight 210DOxford fabric protects your car from rain, dust, and UV rays while keeping it simple..
One layer of fabric makes it less bulky, lightweight and easy to store..
It is ideal for those who want to use Cover easily, as it is easy to use, replace, and dispose of..
In addition, a security warning is printed to ensure security through visual intimidation..

[Simple, easy-to-handle one-layer structure].
● Lightweight 210DOxford fabric is used to protect your car from rain, UV rays, and dust, despite its simple one-layer structure..
Lightweight, less bulky, easy to store and carry, and easy to use.

Water-repellent finish on the CoverBody, and water-repellent specs on the surface...
However, prolonged rain or aging may degrade the water repellency effect, so maintenance such as WaterproofSpray is recommended..

FrontQuantity:Pair (for Left and Right)Mirror position with ventilated ducts to ensure ventilation of the interior..
Reduces steam after running in the rain, and also reduces the risk of rust and corrosion..

Double-sewn seams and seam tape on the reverse side prevent water penetration..

Security warning is printed on the Motorcycle CoverBody to enhance security by visual intimidation effect..

[Others functionality]
The front and rear lock holes are fluorescent (red) to ensure visibility at night and in dark scenes..
Slit-type lock hole with a 10 cm diameter is durable and can be used with thicker chain locks and U-shaped locks..

The handles on the Front LeftRight and Rear tops are useful for easy removal/attachment and for marking the front/rear..

The hem of the cover is made of elastic Material:Rubber, which adheres firmly to the body..
The entire Motorcycle is covered to prevent dust and small stones from entering through the gaps..
It also prevents water intrusion and suppresses rust and corrosion..

The center of the cover is equipped with a Belt with One Touch Buckle to prevent the wind from blowing off the cover and damaging it due to flapping in strong winds..