- NEW
97.41 USD (14,945 JPY) 104.29 USD Save 7%
Delivery Information
No Information acquired.
Product detail
[Manufacturer's Part Number] Q5KYSK160T06
[Old Manufacturer's Part Number] 90793-64425
[Compatible type]
Medium scooter with rear box installed
[Material]
Special high-grade acrylic resin on Toray Tetoron Ox yarn material
Hard W coat with flame retardant
Fluorinated water-repellent finish
100% polyester
(Material certified by Japan Fire Retardant Association
**Based on bikes equipped with a 30L rear box (E300NY), this product does not apply to bikes equipped with a rear box larger than 30L.
*The engine and exhaust are hot immediately after driving.Please use it after it cools down sufficiently because the motorcycle cover may melt.
*The fabric is waterproof and the sewing thread is water-repellent, but it is not completely waterproof, so the vehicle body may get wet depending on the amount of rain.
*Vinyl chloride windshield may be thermally deformed.Do not use this product in high temperature.
*In high winds, the wind may penetrate into the bike cover.Take sufficient care of the equipment, including the prevention of this product from falling over.
*This product is designed to be put on by turning the handle to the left.Right-handed drive lock vehicles will not be able to lock.
*It may not cover the ground surface of the tire depending on the shape of the vehicle.
*This product may not be compatible with some installation options.
*The image shows the Majesty S with the side stand.
*The image may contain other products.
*There may be changes in product specifications due to the manufacturer's reasons.
.
With comfortable air ventilation.
Motorcycle cover made of flameproof material.
・Large three-dimensional ventilations on both sides allow moisture inside the cover to escape effectively.
・The processed flameproof material is used to prevent the flame from spreading in case of arson.
・The two-color cutout design makes it easy to identify the front and rear positions as putting over the vehicle.The adjustable cord allows you to easily and securely tighten from either the front or back.
・The original slit can be used for large locks.The front and rear wheels can be locked from above the body cover.
・The cover is fitted to the vehicle body with an adjustable cord to prevent flapping.