181.19 USD (27,600 JPY)
Delivery Information
No Information acquired.
Product detail
[Lowering Type] Approx. -30mm
[Remarks] Front fork is adjusted from stock
[Spring part number] 1691
[Preload adjustment] 5mm
[Sag Value] 50mm
[Compression adjustment] low speed 8 clicks back / high speed 1.5 rpm
[Rebound adjustment] 15 clicks back
[Installation man-hours] 1.0h
**If the bike is lowered by more than 30mm, a short side stand may be required depending on the condition of the bike.
*For models with adjustable preload, adjust the lowering to a level where the side stand can be used.
*The product in the photo may differ from the actual product.
*When using the side stand, stop the vehicle on a level surface in first gear.(Because of the lowering, the body will be raised more than stock)
*After installation, the balance of the vehicle body will be greatly changed.Be sure to to set the front and rear settings before riding.
*There may be changes in product specifications due to the manufacturer's reasons..
* The image is only for reference. The image shown may differ from the actual product.
■Rear Spring
Hyperpro's unique low down spring that lowers the vehicle height by changing the rate and adjusting the oil level without changing the free length of the spring.
Enjoy the smooth ride of the Constant Rising Rate, which flexibly absorbs impact and holds firm at the back.
●The front springs are supplied with the required amount of fork oil.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.