317.05 ~ USD (48,999 JPY)
Delivery Information
-
Please select product form first.
Product detail
■Dark Edition
[Material] Aluminum
[Lever type] Round
**Conditions of use (Please check the dimensions with the stock wire and pull the wire on the handle side.)
・The diameter of the barrel must be Φ8.
・Wire end diameter must be Φ8.
・Inner wire length must be 40-50mm.
If the above does not apply, change the tension on the engine side.If the engine side tension is changed but does not meet the above dimensions, it cannot be used.
*Ratio selection: Make sure that the distance from the center of the pivot to the center of the tyco of the stock lever holder is 28mm -34mm.
*Operation may become heavier if the distance from the pivot to the center of the barrel is less than 32mm.
*Some switches may require modification or cannot be installed depending on their shape.
*Clearance when installing: There is a possibility of contact with the cowl, meterTension may be applied depending on the wire routing.
*The image may contain other types.
*There may be changes in product specifications due to the manufacturer's reasons..
* The image is only for reference. The image shown may differ from the actual product.
GALE SPEED Original Wire Clutch Holder Kit.
GALE SPEED's unique and detailed features, such as lever ratio and lever position adjustment, provide the perfect touch that each rider is looking for.
Like the master cylinder, the aluminum material is carefully machined to provide precision, rigidity, and lightness without rattling and without losing fingertip force.
[ROUND LEVER]
The lever has a round shape that can be pulled by sliding it with your finger.
High-spec clutch holder kit for exquisite lever operation
Wire Clutch Holder Kit with all adjustments for smooth clutch operation.
It gives you a custom-made feeling of operation.
■Ratio adjuster
Equipped with two types of barrel holders with adjustable lever ratios.You can choose the lightness and operation feeling.
*Operation may become heavier if the distance from the pivot to the center of the barrel is less than 32mm.
■Lever opening angle adjustment mechanism
The lever opening can be adjusted in 12 steps by dial operation.
■Mechanical switch
Includes 2-terminal mechanical clutch switch.
■Cut-out processing of lever
The lever has been cut out to reduce weight.In the event of a fall, only the tip breaks off, and its advantage is that you can continue riding.
■Built-in bearing
The pivot part connecting the bracket and knocker is designed to operate smoothly even when the pivot pin is tightened.
*ELABORATE / red logo specification lineup is gold
■Wire adjustment dial
Wire space can be easily adjusted while wearing gloves.
■Foldable lever
Designed in a way that the lever tip collapses in the event of a fall which reduces the impact on the main unit.
■The same ratio as stock, but lighter
Bearing in the pivot reduces resistance when pulling the lever, enabling smooth clutch operation
■Change of lever touch by the barrel holder
By changing the distance from the working point (Barrel) to the fulcrum (Pivot), the ease and lightness of clutch disengagement can be changed by utilizing the "principle of leverage".
・Two types of barrel holders are included
This product comes with 28mm and 30mm, or 32mm and 34mm barrel holders.
Choose the holder size that gives you the desired touch.
＜Distance to fulcrum＞
●In case of being further
The stroke becomes shorter and the clutch disengagement becomes better.
*The clutch may not disengage depending on the bike model.
●In case of being close
The stroke becomes longer and clutch operation becomes lighter.
*The clutch may not disengage depending on the bike model.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
There are no Customer Review yet.
New Custom Articles
