[Component] ・Bracket for speed sensor ・Specialized mounting harness
*This product is exclusively for use with stock speedometers. *We have not checked the operation of the vehicle with other than stock wheels and stock disc bolts. *Make sure to install this product when installing SP Takegawa's 5-speed cross transmission kit.The speedometer is not working. *Since the speed is detected from the number of rear wheel rotations, there will be an error between the actual speed and the speed due to factors such as changes in tire outer diameter and slippage. *You can increase or decrease the displayed speed, but if you set it improperly, it may cause you to be cited for overspeeding.If you use this product on public roads, please do so at your own risk. *Please do not install any aftermarket H.I.D kit or any other company's LED headlights or fog lamps at the same time. *Some ballasts / inverters (voltage conversion devices) emit high voltage noise that can adversely affect digital circuits, causing product failure or malfunction. *Please do not install the headlight ON / OFF switch and the aftermarket ignition system at the same time. *Modification may be required depending on individual differences of the stock rear caliper bracket. *Depending on the lot, the product may be delivered with the old price and label with the old JAN code before the price change. *There may be changes in product specifications due to the manufacturer's reasons.
This product is for stock rear caliper bracket. Successor model to 05-06-0017
This speed sensor kit detects the rear wheel speed of the GROM and drives the stock speedometer. Even if the sprocket is changed or SP Takekawa's 5 speed cross transmission is installed, it is possible to display the speed on the stock meter. Also, when the tire size is changed due to customization of the vehicle, the display speed can be corrected in 16 steps from 84% to 114% of the stock speed by setting the rotary switch on the stock meter drive unit. (Assuming the stock tire outer diameter is 492mm, it corresponds to tire outer diameters of approximately 413mm -561mm.)
A special installation harness is included, so you can install it with just a coupler without cutting the stock harness.
This product is for use with the stock rear caliper bracket where the speed sensor is installed by attaching the special bracket to the stock rear caliper bracket.
The attached bracket for the speed sensor is made of machined aluminum with anodized surface.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!