■Shape: For PH7, T19 P15D25-1 ■1 piece (blister pack) [Product Specification] ・For mopeds, 12V models only ・Power consumption: Approx. 5 W for both high and low ・Can be used in both DC and AC powered vehicles (AC/DC dual power supply compatible) ・White color, color temperature 6000K High beams are "plus-on high beams" that are turned on at the same time as the low beams ・Luminous flux 800-600Lm, equivalent to 35-30w class halogen bulb for mopeds
*A part of the total length of this product (the part corresponding to the glass of the bulb) is longer than that of a stock bulb.Therefore, the tip of the product may hit the lens of the lamp on the side of the vehicle, making it impossible to install in some models.Please refer to the dimensional drawing to confirm the depth of the vehicle side lamp in advance before purchase. *Some models such as the Monkey and Ape cannot be installed due to their longer dimensions than the stock bulbs. *When used in a two-light vehicle (such as a Zoomer), replace both lights with this product.It cannot be used in combination with light bulbs or other products. *Some other products are included in the image. *There may be changes in product specifications due to the manufacturer's reasons.
PonLED is a series of entry model LED head bulbs for mopeds that can be used not only by custom and dress-up users, but also by users who demand replacement bulbs.
[Features] Easy to install, quick and easy to install. 2. 8 types of wide variations for most of current and old bikes. Price range equivalent to that of affordable halogen bulbs. Ultra-low power consumption of approximately 5/5W, only 20% or less than that of stock bulbs. Sharp, pure white light and the new "Plus On High Beam" mechanism improve visibility. The 6000K pure white light and the new "Plus-On High Beam" mechanism, which simultaneously turns on low beams when high beams are in use, provide bright, easy-to-see illumination from the feet up and increase visibility.
[Moped LED headlight bulb PonLED] All-in-one LED headlight bulb with no wiring required
■Easy for anyone to install, just replace the stock bulbs!No messy wiring at all! PonLED is an all-in-one type with a built-in controller and is easy to install because its mouthpiece is the same shape as a stock bulb. There is no troublesome wiring. This is an entry model LED headlight bulb for mopeds that can be converted to an LED headlight by simply replacing the stock bulb.
■12V for moped motorcycle Both DC and AC are OK!Fits many models It is compatible with both direct current (DC) and alternating current (AC) power sources, so it can be used with most mopeds. There is no need to find out or worry about whether your bike is DC or AC. Eight wide variations, unique to M & H, are available to fit many models.(Some not yet released)
■Low power consumption of approximately 5W, which is battery-friendly Low power consumption of approximately 5W for both high and low beams. This is a great advantage for vehicles with additional electrical equipment such as heated grips, or for lower year vehicles that were originally weak in power generation.
■Plus-on high beams are bright even in the foreground When switching to high beam, the high beam is "plus-on" while the low beam remains on. Both high and low lights are on at the same time, keeping the front bright and illuminating the distance.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
I'm useing for Honda Giorcub, but the headlight bulb was too long, and I cut the end. Not heating, not flashing. It1s very good for my bike.View Detail
It flickered quite a bit. My Motorcycle does not have a Battery, so that may be the reason. Naturally, I don't recommend using LEDs in a battery reply.View Detail
[How is it used? Commuter Vehicle. Was the one you received as per Image? Heat Radiation Fin is long and the depth of the fin is too long, which is a disappointment because it hits the light lens hard when it is supposed to be guaranteed to fit the webig! Was the installation difficult? The tip of the LED Light Heat Radiation Fin was a little too close to the Lens as it was, so a spacer was made and the tip of the Heat Radiation Fin was modified to fit. How was your experience with it? The high beam is a simultaneous light, so it illuminates the front of the lamp as well as the front of the lamp. The Meter panel and Neutral lamp are also brighter due to lower power consumption. [Included Parts:were they on? There is not [Was there anything that disappointed you? Not so much Manufacturer, but rather Webeig's conformity check is not good enough! Other items that would be helpful XRMOTARD is guaranteed to fit, but in the end, the User will need to use Spaceretc. If the shape of the tip of the Heat Radiation Fin were made shorter and more radial, etc., the Heat Radiation Fin would not be visible from the front and the number of compatible cars would increase. I don't know how long it will last, but overall, I think it's almost there.View Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!
?
