I really like it.The design, completeness, and bracket fitting of the object were perfect for my standards.The accompanying manual was in Japanese, but the pictures alone were enough to explain.
View Detail
256.6 USD (38,465 JPY)
Webike Point: +385 pt
(2.56 USD)
Delivery Information
-
Please select product form first.
Product detail
Unpainted products
Duct section: Aluminum mesh already attached
[Components]
・FRP Bracket (Black Gel) x 4
・M6 Washer x 1
・M6 x 15mm truss screw x 4
・Grommet x 2
**FRP products and carbon products are unpainted products.
*FRP (black gel) is buffed and shiny and can be used as it is, but it is a product to be painted.
*The surface of the carbon is also buffed with clear gel coat finish to make it glossy.This can be used as it is, but please apply urethane clear if necessary.
*Installation of the product should be carried out by a mechanic or a maintenance shop who has reliable knowledge (based on the service manual issued by the motorcycle manufacturer) and skills.The quality of the product will not be guaranteed if you do not follow the correct installation and usage.
*Stock exhaust cannot be installed.Only the Akrapovic full exhaust (catalyzed model) has been checked for fitment.
*If necessary, please purchase a heat-resistant sheet (25 x 50) and attach it.Recommended to be attached on the left side of the under cowl and the rear silencer.
*The oil catch structure (with grommets at two places in the front and rear) is designed to catch the oil, but the position of the opening of the duct part is low, so please use it after confirming the regulations of the running event as using it in the riding event.
*This product is made of heat-resistant resin, but it may have a smell like burning due to initial heat burn.
*FRP products and carbon products are unpainted products.
*FRP (black gel) is buffed and shiny and can be used as it is, but it is a product to be painted.
*The surface of the carbon is also buffed with clear gel coat finish to make it glossy.This can be used as it is, but please apply urethane clear if necessary.
*Installation of the product should be carried out by a mechanic or a maintenance shop who has reliable knowledge (based on the service manual issued by the motorcycle manufacturer) and skills.The quality of the product will not be guaranteed if you do not follow the correct installation and usage.
*The image shows carbon twill weave.
*There may be changes in product specifications due to the manufacturer's reasons.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed..
* This item can not be cancelled, returned nor exchange after placing an order.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
MODEL PAGE LINKS
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Fits:YAMAHA MT-09 SP 21-, YAMAHA MT-09 21-
Installed on: YAMAHA XSR900
Fits:YAMAHA MT-09 SP 21-, YAMAHA MT-09 21-
Jun 30, 2022
Installation on SP Tadao Exhaust System (not compatible, modification required)
I was looking for an Under Cowl that could catch oil, and I found this product and ordered it.
The installation was confirmed as AKRAPOVIC Exhaust System, but we have replaced it with SP Tadao Exhaust System (POWERBOX FULL RS), and the expansion chamber part is cylindrical, so we purchased it on the premise of modification.
After confirming that the rear end would hit as expected when actually installed, the necessary area was shaved off a little at a time to match the actual product.
The object is cylindrical in shape and the under cowl is also inclined, so it did not go as expected. After repeatedly removing and shaving, shaving and matching, we finally secured clearance with the expansion chamber, and when we tried to install it, the screw position did not match slightly.
After forcibly installing it and rechecking the clearance, I found that the expansion chamber at the rear end was not hit and the parts at the mounting point were loose enough to allow for some adjustment without tightening the bolts, but when I looked underneath, I found a moccoli that looked like the forward part of the expansion chamber.
I thought about cutting up this area as well, but it would be a complete disaster if the oil receiving function is lost, so I decided to put Heat Insulating Material on it for now and see how it goes.
I completed the installation and test drove it to lightly fill it with Gasoline, but it smelled a little burnt? I thought I would give up and drill a hole in the oil receiver if it burns, since I usually remove the oil receiver rubber plug.
This time, it was installed outside of the conformity. I wished the bottom was 5 to 10mm lower and the back end sloped back a little more, but I am satisfied because it is almost exactly as in the Image.
Helpful?
New Custom Articles
