About quality and texture - The 55 degree breather pipe kit from SP Takegawa is made from billet aluminium with precision machining and an anodized surface finish, also included is 12mm breather hose made from a soft rubber material with reinforced strands with a clear finish, the quality from the overall fit and finish is perfect.About the feeling of use - Combined with an oil catch tank, the breather pipe kit has resolved my engine oil loss caused from high RPM riding by allowing the oil vapour generated during this period of riding to be directing back to the engine via the oil fill plug on the stock clutch cover.Products to buy together - A key product to buy together with the breather pipe kit is a oil catch tank that will allow for the collection and separation of the oil from the vapour output by the engine.Difficulty of installation - The installation of the breather pipe kit is a simple task that took 0.2 of an hour to complete. Common sense and the use of basic hand tools is all that is required to secure the breather pipe kit to the oil fill plug on the clutch cover.Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the breather pipe kit is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the breather pipe kit, I chose EMS for a earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.
View DetailBreather Pipe Kit (55 Degree Swivel) (for Stock Clutch)
Product # 07-06-0007
5 (1 reviews)- Sale
43.72 USD (6,660 JPY) 54.7 USD Save 20%
Delivery Information
No Information acquired.
Product detail
Mounting hose inner diameter: 12mm
Machined aluminum with silver anodized finish
Adopts a swivel type that can rotate the union part 360 degrees
It can be used with stock clutch cover
With oil level gauge
[Set components]
Breather hose (inner diameter 8mm) 1000mm, Breather cap, O-ring 1 piece, Hose clamp 1 piece
**The oil level gauge is installed, but it may not be usable for some vehicles even with a stock clutch.
*Oil level gauge is for Monkey and Gorilla manual clutch models.It cannot be installed on centrifugal clutch vehicles.
*There may be changes in product specifications due to the manufacturer's reasons.
*Depending on the lot, the product may be delivered with the old price and label with the old JAN code before the price change..
The union part of this kit can be rotated 360 degrees, which increases the flexibility of the handling.In addition, it can be detached without removing the hose, which improves maintainability compared with conventional products.In addition, it is equipped with an oil level gauge to check the amount of engine oil.The body of the breather is made of machined aluminum with silver anodized aluminum, and it has a calm design that does not destroy the style of the Monkey Gorilla.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.