*How to install the O2 sensor boss:It is necessary to make a hole in the exhaust pipe and fix the O2 sensor boss by welding. *The thermometer and the air-fuel ratio meter cannot be displayed simultaneously. Depending on the sensor installed, the function display can be switched. *In the case of Super Multi TFT Meter & Screen Kit, it is necessary to make a hole in the headlight cover in order to install the screen. *Cannot be installed at the same time with H.I.D. or other company's LED headlights and fog lamps. The ballast/inverter (voltage converter) may emit high voltage noise that adversely affects the digital circuit, causing product failure or malfunction. *For the setting of the gear position:For the setting of the gear position, both the speed signal and the engine speed signal must be input to the Super Multi TFT meter. Therefore, an automatic reading of the data by "real driving" is necessary. Please do not set the gear position in city areas because of traffic lights and traffic jams. When driving, please select a road with good visibility, check the surrounding road conditions, and drive with caution. *It may contain other parts in the photo. *Please note that the product specification may change due to manufacturer reasons.
The "Super multi TFT Meter", which combines the Powertest function and other functions into one, is now available for the MONKEY125(JB02)! Speed, RPM, Gear position, Thermometer, Fuel gauge, Time, Battery voltage display and Tire outline correction, Powertest etc.,It is a Multimeter with so many features! Digital display with TFT LCD and high visibility Tachometer.
[Function list] Speedometer:0-360km/h Speed setting (Setting range:300-2500mm Setting unit:1mm) Speed warning light (setting range:30-360 km/h, setting unit:1 km/h) Maximum speed record (display range 0-360km/h setting unit 1km/h) Tachometer:0-13000rpm Tachometer warning light (Setting range:1000-13000rpm Setting unit:100rpm) Digital tachometer 0-20000rpm RPM warning light(Setting range:1000-20000rpm Setting unit:100rpm) Ignition setting (Setting range 0.5・1-24 Setting range Hi Act・Lo Act) Odometer:0-999999km (Display unit:1km) Total distance, User Odo setting (Start point distance optional input) Trip meter A, B:0-9999.9km (Display unit:0.1km) Display returns to 0 when the range is exceeded. Oil replacement warning:The entered mileage will automatically decrease as the vehicle is driven. Maintenance distance (Notification MODE (Setting range:500-16000km Setting unit:100km)) Gear position (display:all GEARs displayed, all GEARs not displayed) GEAR number registration function by learning MODE Fuel gauge (Display range:6 levels)Fuel sensor resistance Pre-set 100Ω 250Ω 270Ω 390Ω 510Ω 1200Ω User resistance setting Resistance range:0-1500Ω Fuel warning light Back light:Day / Night MODE LCD screen AUTO switching function Brightness adjustment function Lighting color switching function Lighting color:White, Red, Orange, Green, Blue, Yellow Only the Tachometer scale can be changed for DayMODE. Night Mode allows you to change between the Tachometer scale and the Gradation section of the Main LCD. Clock / Day of the week (Setting range:12 hours or 24 hours) *The day of the week is automatically entered when the year, month and day are set. By setting the year, month, date, and day of the week, it is displayed on the opening screen when the key is turned ON. *The day of the week is automatically filled in when you set the year, month and day. Voltmeter (Display range:8-18V) Voltage warning light (Setting range:8-18V, Setting unit:0.1V) Thermometer(Display range:0-250 degree) *Thermometer can be measured by SP Takegawa drain bolt. Temperature warning light(Setting range:60-250 degrees) Maximum temperature record(Setting range:0-250 degrees) * SP Takegawa O2 Sensor and O2 Sensor Boss are required separately. Powertest function:Target Speed, Target Distance, and Top Speed. Each record is displayed as Record. The highest record is displayed at the top, and No.2 and below are displayed in the order of measurement. Record can be Reset. The target speed and distance are set to the specified values in the function settings. Indicator Lamp:Warning lamp, Turn lamp, High beam lamp, Neutral lamp, Engine warning lamp, Oil check lamp, ABS Lamp External Switch:The external switch included with the Meter is used for all Meter operation and function settings.
Super Multi TFT Meter (For MONKEY 125(JB02)) Product Componente:Exclusive Sub harness and Bracket Set are included. Rubber mount is adopted for the meter fixing part to soften the vibration to the meter.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!