[technical data] ・Recommended installation length: 290mm ・Length adjustment range: Adjustment at vehicle side ・Compression high speed (pressure side): ○ 18 ways ・Compression low speed (pressure side): ○ 27 ways ・Rebound (Extension side): ○ 45 ways ・Standard spring rate: 85N/mm ・Free length of spring used: 150mm ・Preload adjustment: Available ・Hydraulic preload adjuster: Stock equipment
*There may be changes in product specifications due to the manufacturer's reasons. *Product specifications and prices are subject to change without notice. *Please note that the color of the product may look different from the actual color. *This product may be discontinued without notice. *Adjustment range of mounting length is slightly variable. *Standard spring rates are set at a weight (including equipment) of 65-75 kg. *When the weight varies, please specify 5N/mm as a guide.
* The image is only for reference. The image shown may differ from the actual product.
[Material] ■Selected materials All parts used in the Matris M46R rear monoshock unit, from the damper head, pistons and cylinders to the preload adjuster nut and double nut, are made from lightweight, high-strength super duralumin 7075, Hard anodizing is applied to give high durability.
■NC Cutting Unit Instead of using cast bodies, which make up the majority of shock unit bodies on the market, Matris opted for NC machining, despite its higher cost compared to casting. There are several reasons for this, as described below. First of all, it has overwhelmingly high strength. Compared with the casting method, which is formed by pouring into a mold, the carving from solid wood is very superior in terms of strength and is the best choice for suspensions used under severe conditions. And it will be a big advantage not only for race use but also for street use where durability is required. Secondly, it is easy to change the profile. In the case of NC cutting without using a mold, the profile can be easily changed by computer. This allows for detailed version upgrades and reduced development costs, resulting in the release of superior products to the market. And it's very beautiful. Hard anodizing for durability and the sharp lines and luster of machined duralumin. The weight of the body that has been thoroughly reduced to the inside of the nut and reservoir tank, is a finish that emits a preeminent presence even in the group of replacement parts of expensive super sports, and satisfies the desire of the user to own.
[Specification] ■Titanium coated piston rod T2 Racing is the first suspension manufacturer to use titanium coated piston rods in the rear monoshock unit, which has become a standard feature in the front forks of many suspension manufacturers. The excellent low friction of the titanium coating further enhances the smoothness of the beginning, handles negativity from the road without transmitting it to the rider, and at the same time, provides excellent tire grip and road-following performance, allowing the tire to feed back more necessary information to the rider. At the same time, the smooth operation of the titanium coating does not put stress on the internal sliding parts, which prevents setting errors and provides the benefit of high durability.
■3-way adjustment mechanism, hydraulic preload adjuster M46R model has a adjustment mechanism as full adjustable. It has independent adjustment knobs for low speed and high speed on the elongation side and the pressure side to enable fine setting. Easy-to-adjust hydraulic preload adjuster is standard.
■Nitrogen gas-filled reservoir tank In order to prevent cavitation caused by the violent movement of the piston rod, all models are supplied with the largest possible nitrogen gas tank. By maintaining high pressure inside the cylinder, cavitation is prevented, high durability is achieved, and setting errors are prevented.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!