[How is it used?
I started considering it because I am 169 tall and the Handlebar is a little far away and my upper body gets tight when I ride for long periods of time.
Personally, I think Handlebar is I want to pull it moderately forward, not up." We chose this one because it seemed to best meet our needs.
Was the one you received as per Image?
Texture and cloisonne ware? is satisfactory. It is almost invisible Parts, but …
Was the installation difficult?
I asked N○PS to do it for me. it seems to be a little difficult to handle the Wiring from what I see on YouTube etc. The labor cost was less than 8,000 yen.
How was your experience with it?
I can feel that my riding posture has changed considerably. It has become very comfortable and driving has become even more enjoyable.
I think the price is high, but I am also very satisfied.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
I try not to pay too much attention to it, but it looks quite different, and it's obvious if you don't have the Cowl or Meter visor attached. The front view looks a bit dumb with the distance between the Light and Meter opening up.
If you are concerned, you may need to take action to add Cowl or Visor.
- Instock
162.47 USD (25,300 JPY)
Delivery Information
In Stock : 2 left, Ships within 24 hours.
Estimated arrival date around
FITMENT
-
Rebel300
-
Rebel250
17-21
-
Rebel 1100
21-
-
Rebel500
17-21
See all
HONDA
Product detail
Material / Specifications: Duralumin, black anodized, with enamel emblem
Specs: 40mm back / 15mm up
**It can be installed by bolt-on without replacing the harness and hoses.
*For REBEL1100 (MT), it is necessary to change the clutch wire routing.
*In case of installing REBEL 250 / 500 HONDA stock option or meter visor, the optional bracket for REBEL 250 / 500 meter visor (sold separately) is required.
*There may be changes in product specifications due to the manufacturer's reasons.
.
This is a handlebar setback riser to be used by inserting it into the stock handlebar post.
The handlebar position is 40mm back and 15mm up from stock.
Made of machined duralumin, anodized finish, with cloisonne emblem.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
MODEL PAGE LINKS
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Fits:HONDA , HONDA Rebel500 17-21, HONDA Rebel 1100 21-, HONDA Rebel 1100 21-, HONDA Rebel250 17-21
May 23, 2022
Fits:HONDA , HONDA Rebel500 17-21, HONDA Rebel 1100 21-, HONDA Rebel 1100 21-, HONDA Rebel250 17-21
Jun 1, 2021
When I was riding my REBEL 1100, I felt like the handlebar was too far away from me, so I was looking for a way to pull the handlebar forward, and I found Earls Gear's Handle setbackRiser. (For REBEL250 and REBEL500) So I bought it and asked HondaDREAM shop to install it.
I was told that if I install the hose as it is, the brake hose would be too tight and it would be dangerous to cut the HandlebarLeft, so I had them change the way the brake hose runs.:Pair (for Left and Right) So I had the angle adjusted slightly and completed the installation.
The Handlebar has been pulled forward to make it easier to ride than the NORMAL state. (>ω<) He's short. (We are 162cm tall.) If you feel that the Handlebar is too far away, you can try it;
New Custom Articles
