Lowdown suspension of YSS was installed and lowered the vehicle height by 20mm.
In the article of the magazine etc., it was said that it was normal STANDOK, but the body of the car rose up more than OEM when it stopped, and it felt unstable even on a little slope.
There are two kinds of Side Stand, one is GCraft and the other is Takekawa. GCraft is cheaper but I bought Takekawa's product because OEMSTANDSensor is not available.
The bolt nut is very hard and the reverse side nut is not easy to remove.
The Bolt side also has a short head length and the tool is easy to remove.
The Spring was removed by this principle using the Ring and the Driver which hook the Spring, but it took a long time to find the Ring of good Size strength. However, it took me a long time to find a good size Ring. It might have been better to use a good size needle Gold etc.
It took some time to install the spring, but I was able to do it without any problems.
The finish is good, and the leaning of the body became deep, and it became stable. The appearance is also Parenthesis good.
- Sale
- Instock
111.06 USD (17,380 JPY) 116.1 USD Save 4%
Delivery Information
In Stock, Ships within 24 hours.
Estimated arrival date around
FITMENT
-
CT125
(JA55-1000001-/JA65-1000001-)
-
MONKEY125
(JB05-1000001-)
-
MSX GROM
(MLHJC92)
-
DAX125
(JB06)
See all
HONDA
Product detail
**There may be changes in product specifications due to the manufacturer's reasons.
*Depending on the lot, the product may be delivered with the old price and label with the old JAN code before the price change..
Adjustable side stand for stock steps for a wide range of custom vehicles, including low-profile tires and lowered vehicles
■Details
This is an adjustable side stand for a wide range of custom vehicles including low profile tires and lowered vehicles.
This product can be fine-tuned by rotating the stand bolt to set the desired side stand length to suit your custom vehicle.
It is also possible to install the stock side stand switch so that you can still use the side stand return function.
It can be mounted without stand switch.
The stand body and fixing nut are machined from aluminum, and the spring hook, pivot bolt and stand bolt are made from stainless steel.
The use of aluminum and stainless steel prevents the corrosion caused by rust that occurs with stock stands.
The aluminum material is anodized silver for superior corrosion resistance, and the laser marking logo is on the stand body.
Product configuration includes a black tube cover.
By installing the tube cover, the dirt of the stat bolt is prevented and the dress-up effect of the vehicle is improved.
■About installation
■Adjustable side stand adjustment range: 36mm shorter than stock - 19mm longer
*If you extend it from the stock position (approx. 196mm), it will interfere with the center stand.
■The stock spring will be reused.
■It can be installed with SP Takegawa's Low Down Rear Shock Absorber (25mm down) 06-04-0094 / 0095 / 0096 / 0097 and (40mm down) 06-04-0119 / 0120 / 0121 / 0122.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
MODEL PAGE LINKS
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Fits:HONDA ADV160 (KF54-1000001-), HONDA MONKEY125 (JB05-1000001-), HONDA DAX125 (JB06), HONDA MSX GROM (MLHJC92), HONDA MSX125SF
Oct 30, 2021
New Custom Articles
