Once you select the option, estimate delivery time will be displayed.
*Shipping date and Estimate time of arrival are not guarantee.
Once your orders are placed, we will check the stock of manufacturer and send you the confirmed Shipping time via e-mail.
[Material] Cowl Body: FRP (Surface matt finish on the back) Windshield: polycarbonate [Specification] Bolt-on installation is available [Size] Total height: 470mm Full width: 385mm Depth: 280mm Weight: 1020g
*The image may contain other colorings. *The weight of the product varies depending on the model. *There may be changes in product specifications due to the manufacturer's reasons.
Slightly rounded bikini cowl with standard design. High rectification effect and fearless styling can be obtained. This product can be installed to the stock light by bolt-on. The light is securely fixed at three points: the right and left rubber mounts and the lower rigid mount. The cowl body is made of FRP, and a polycarbonate windshield is standard equipment. The windshield can be selected from clear or smoke.
■Road Comet Sporty mini cowl with a wide range of standard designs and high quality. The slightly rounded shape of the bikini cowl can be installed on any type of vehicle without any sense of discomfort and enhances the original styling of the vehicle. It also reduces wind pressure from the shoulders to the torso to support comfortable high-speed running. The cowl body is made of multi-layered FRP for durability, with a matte finish on the back surface. Compatible with Japanese stock color coating with acrylic urethane paint. The windshield can be selected from clear or smoke and stainless steel screws, polycarbonate washers and lock nuts are used to attach the windshield to the cowl body.
Bolt-on installation can be done due to the exclusive design of the model Cut line and installation bracket are set for each model, and installation is bolt-on. No special tools are required for installation.
■Secure fixation by 3-point mount Rubber mounts on both sides and rigid mounts on the lower part of the vehicle prevent uncomfortable vibrations and provide a stable ride even at high speeds. All the stock colors are painted clear and the back side is also painted with the same color.
Installation procedure 1 Please check the contents before you start to install the parts. ・Cowl ・Windshield ・Instruction Manual, Vehicel Body Mounting Bracket Set, Windshield Screw Set (Blue)
2 Please prepare the necessary tools for installation. ・Combination wrench or spanner (size 14mm, 13mm, 12mm, 10mm, 8mm) ・Hexagonal Wrench (Size 4mm, 3mm) ・Phillips screwdriver ・Blanket (to protect the vehicle) ・Scissors or nippers
3 Attach the mounting rubber to the cowl. Once you remove the collar from the inside, insert the collar after installing the mounting rubber. The mounting rubber is included in the vehicle mounting bracket set.
4 Attach the windshield to the cowl. Temporarily assemble the windshield screws in all holes and tighten them evenly. Windshield screws are included in the windshield screw set (blue).
5 Since the lock nut is designed to prevent loosening, it is sufficient to tighten the lock nut to the extent that there is no rattling after checking by hand. Please note that over-tightening may cause deformation or cracking of the windshield.
6 Remove the screw that holds the light rim in place.
7 Pull out the coupler and remove the light unit.
8 Remove the bolts securing the headlight and replace with the supplied side mount bolts. Side mounting bolts are included in the body mounting bracket set.
9 The work is done one side at a time to prevent misalignment of the optical axis.
10 Insert the coupler and install the headlight unit in the original place.
11 Tighten the screws on both sides.
12 Fix the included bracket temporarily. In order to adjust the position of the cowl later, it is loosely assembled here so that the bracket can be moved.
13 Put the cowl on. Align the holes on the left and right side of the light with the holes on the left and right side of the cowl. Align the bracket so that it comes inside the hole in the bottom of the cowl.
14 Install the bolts on both sides to secure the cowl. The left and right bolts are included in the body mounting bracket set.
15 Align the bracket with the hole at the bottom of the cowl and temporarily fix with the included bolt and nut.
16 Adjust and position the clearance between the light rim and the cowl around the light.
17 Tighten the bolts on the body side of the bracket.
18 Tighten the bolts on the cowl side.
19 Installation completed. Turn the handlebar to the right and left to check for any interference.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!