I installed on honda Hornet 250.Looking good design & easy to fixing.As a fixing tool Allen key will along with catalog.Depending on handle size there are rubber gland (for clamp mount)along with parts.can be turn and adjusted vertical or horizontal .The clamp mount will fitted firmly to handle."dyatoma made in Japan " printed on camp .I'm using 165.3 x 76.8 x 10.1 mm phone.tightly clamp to the phone,little hard to put on ,but can be adjusted as a phone size.phone mount corner clamps are protected with sponge pad for avoid phone scratches.There are 2 white rubber band hang on with phone bracket, it's for put in your phone for safety.(avoid falling down)I will Recommended this for motorcycle enthusiast.
View Detail
33.02 USD (5,168 JPY) 34.51 USD Save 4%
Webike Point: +52 pt
(0.33 USD)
Delivery Information
-
Please select product form first.
Product detail
Compatible with iPhone 11 / Pro / Pro Max / SE (2nd generation)
[Dimensions of mountable models (approximate, including protective cases)]
・Vertical adjustment: Adjustment width 123-170mm
・Thickness adjustment: Adjustment width 6-18mm
・Left/right adjustment: Adjustment width 55-85mm
・Body rotation: 360° Rotation
・Swiveling
・Weight: Less than 300g
[Mountable handlebar outer diameter]
・Φ22-29
[Product Configuration]
・Holder (Swing clamp / Slide wing low type) *assembled
・Slide Wing High Type
・Hexagonal wrench
・Silicone Band x 2
**Mounting on the bent or tapered part of the handle is not possible.
*Drivers are prohibited by law from gazing at the windshield of a smartphone, bike navigation system, mobile phone or using the phone function while riding, and it is very dangerous.This can cause serious accidents due to inattention to the road ahead, so please obey all laws and regulations and ride safely.
*Mounting on bars other than the design outer diameter (Φ22-29) and odd-shaped bars is not possible.
*Does not fit models that exceed the design weight limit (up to 300g).
*It is not permitted to install the product or the installed product in contact with other parts such as the body parts.
*The button bolt in the center of the main body (the bolt that connects and fixes the main body to the pivoting clamp) cannot be adjusted or disassembled.
*Do not use solvents or chemicals that may damage the material of the product, such as applying anti-loosening agents to each bolt.
*This product is packed in the assembled condition, but it is necessary to adjust and tighten each part, so please use the product after fixing the "Side Wing", "Side AL Arm" and "Swing Clamp" securely with the attached hexagonal bolt.
*There may be changes in product specifications due to the manufacturer's reasons.
When requesting an inspection of a product, a receipt or other document that proves the date of sale is always required.
.
Anywhere, any angle.
Securely bolted.
Easy to remove from the handle without tools.
[Excellent operability, horizontal button smartphone support]
・If you check and adjust the size at the beginning, you can insert your smartphone and it will fit perfectly.
The three-pronged design is also compatible with smartphones with a center horizontal button.
[Locking mechanism for safety and security]
・The side wings are locked with a unique locking mechanism.
The lock lever has been enlarged to improve operability.
[Body can be rotated without tools]
・It can be rotated 360° without using any tools while the smartphone is attached.
[Adopts aluminum parts]
・The slide arm is made of high-strength aluminum alloy to support large smartphones.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Installed on: HONDA HORNET250 (CB250F)
Jul 3, 2022
Easy to install, satisfactory design and construction.
The Rigid type is a little troublesome to install, but it is solid.
Helpful?
May 26, 2022
Good cosmetics, enough for your needs
It has sufficient functions and good cosmetics.
Since it is easy to rotate, I can easily use it in different Situations, such as vertical for high speed driving and horizontal for general roads.
The holdability is sufficient and there is no fear of dropout, etc.
Aluminum and resin are used in the right places, which also contributes to the design.
The only difficulty I dare to mention is that the vertical orientation is fixed at the time of installation and cannot be adjusted after installation. This point can be resolved by attaching it in a position satisfactory at the time of installation in a TRY-end-error manner several times.
Previously, we had to use an expensive and slightly ostentatious detachable aluminum cut-out holder that had to be removed every time we left the motorcycle to prevent theft, but this product eliminates that hassle.
Helpful?
May 5, 2022
It can be used without problems (SR400)
I use it for both city driving and touring. I installed it on the straight part of the handlebar, which is a good position to see the meter without any interference. I have ridden about 500 km with the Spacer and it has not fallen off or shifted. If you are concerned about it, you might want to buy a seismic spacer separately.
View DetailHelpful?
Apr 21, 2022
I bought this product because the bracket is made of gold and looks sturdy. It takes a little hang to put on and off with one hand.
View DetailHelpful?
New Custom Articles
