I am using this on my moped bike - Honda RS150R v2 (known as Winner in Vietnam for your reference). I want to install a dashcam and a USB-C charger on board and i want a reliable power source without tapping directly into the battery. The daytona WR 3 is very good, each line is fused at 5A, and a pair of 7.5A. It is waterproof as well but i installed it behind my headlight so there's minimum risk of water exposure.
View Detail
DAYTONA
Accessory Power Supply Unit, D-UNIT WR 3-Port Water Resistant
Product # 16037
4.4 (16 reviews)- Sale
- Instock
14.41 USD (2,111 JPY) 17.74 USD Save 19%
Webike Point: +21 pt
(0.14 USD)
Delivery Information
In Stock, Ships within 24 hours.
Estimated arrival date around
Product detail
[Size (harness length)]
・Input harness / approx. 1300mm
・Output harness / approx. 250mm
[Specification]
・Waterproof design
・Power ON/OFF by main key interlocking
・Attach up to three accessories individually
・Bullet terminal (CA/CB103) 3 ports
・Trip current: 7.5A x 2 systems (recommended current: 4A*), 5A x 1 system (Recommended current: 2A*) *due to use of PTC thermistor
・High power design of 20A
[Product Configuration]
・Main unit x 1
・Double-sided tape x 1
・Wiring connector x 1
・Binding bands x 2
・Cable ties (release type) x 2
**Keep the terminal connections away from water.
*PTC thermistors manage the current flowing through them by heat and resistance values.When the current exceeds the specified current, the resistance value becomes high (high temperature) and it will shut down.If an electronic device is left connected in this state, the temperature will not drop and there is a possibility that the body will melt.If the connected equipment stops working, disconnect it as soon as possible.
*Because the unit itself generates heat, it is not recommended to install the unit under the seat or in other places where heat is likely to accumulate.
*Please do the wiring processing separately for the connection to each electric equipment.
*There may be changes in product specifications due to the manufacturer's reasons..
Bulk power management.
Easily extract multiple 12V power sources.
Rainproof and compact accessory power supply.
Compact power supply unit with three accessory (ACC) power sources.
The power supply can be turned on and off by interlocking with the main key, and can be installed in any place with waterproof design.
Up to three accessories can be attached individually.
Dependable high power design.
By taking the main power directly from the battery, it is possible to achieve high output while reducing the burden on the stock electrical equipment.
Can be installed anywhere.
It is waterproof and can be installed in the rainy place.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Installed on: SUZUKI BURGMAN 400
Jun 9, 2023
It is quite small than i expected and that makes easier to find the location for install power supply.I connected heated grip there and work quite well.Highly recommend product.
View Detail
Helpful?
May 4, 2022
I purchased this for charging my phone and for navigation power. I chose this one because the power supply around the handlebar is messy, and I installed it under the Seat, even though the body is supposed to be waterproof. It works fine. I recommend it because it is inexpensive.
View DetailHelpful?
Mar 28, 2022
For future electrical equipment.
I installed it while servicing my ZOOMER. I had previously installed D-UNIT, a different version of this product, on my ZX-10R, but was attracted by the waterproof specification and compactness of this product, so I installed it on my ZOOMER as well.
I installed it in the position shown in the picture, and the ACC power is supplied from BlinkerWiring. The work itself is not difficult, but if you do not have basic knowledge of electrical systems, it would be safer to ask a shop to do it for you. After installation, check the power with an energizing tester. We are planning to install Fog light etc. in the future.
Helpful?
Mar 17, 2022
After installing the driver's license camera, I will also install ETC in the future and may buy electric heating wire next season, so I installed it to facilitate wiring.
I was torn between other products in the Series, but I didn't need a constant power supply and I was worried about the shape of the product.
Select this one, which is the simplest, smallest, waterproof, and lowest price.
Since it was after installing the driver's camera, I redid the wiring from the middle of the process and installed it and Refreshing it.
If multiple power distribution is required, it is good because once it is attached, the rest is easy.
Helpful?
New Custom Articles
