설치가 간단합니다. 동영상 보시고 혼자서도 충분히 설치 가능 하십니다. 장비는 충분히 준비하시고 설치하세요.순정부분과 잘 맞습니다. ct125에게 적합합니다.단점은 뚜껑이 너무 딱 맞아서 고무뚜껑이 잘 안 열립니다. 주의하시기 바랍니다.필수적으로 설치하심을 추천드립니다.
View Detail- Instock
28.55 USD (4,339 JPY)
Delivery Information
In Stock : 1 left, Ships within 24 hours.
Estimated arrival date around
FITMENT
-
CT125CT110 HUNTER CUB
All JA55/JA65 models *Fits domestic-specification models only.
Product detail
[USB port] 1.000mA 2pcs
[DC5V Max. output] 2.000mA (when only 1 port is used)
[Specification]
・Coupler on
・Drip-proof specification
・Built-in LED (Blue)
[Component]
・Power supply harness for exclusive use of models (power supply extraction point: Inside headlight case)
・Mark Tube (Kitako Original)
・USB bracket for handlebar (used when handlebar is installed)
[Interface] USB / 1.1 x 2 port
[Input / Output voltage] DC12V / DC5V: Maximum 2A (when using 1 port)
[ACC+] Accessory power
[GND-] Ground
**Fits to domestic specification vehicles only.
*This product is designed for 12V vehicles only.Do not use this product for vehicles other than 12V vehicles.
*It is not completely waterproof.Do not use in vehicle washes or in the rain.When not in use, be sure to attach the attached rubber cap.
*Dew condensation may occur inside the main body (rubber cap) due to temperature changes.Avoid places where the temperature changes rapidly (around the engine), and check frequently to remove water droplets.(Remove water droplets with an air duster or vacuum cleaner.) It may cause trouble.
*Do not use for connection of products with high power consumption and current (amplifier, compressor, etc.).
*There may be changes in product specifications due to the manufacturer's reasons.
.
Just by inserting the connector, the USB power supply can be removed!
This 2 port USB power supply is ideal for mobile power supply and comes with a dedicated harness.
For securing the power supply necessary for charging mobile phones and other daily necessities!
The USB power supply kit can be installed on the bracket for the accessory socket next to the main key.
・The accessory power supply (ACC+) is used.When the key is turned on, the power is supplied and the built-in LED (blue) lights up.
・Comes with a bracke that allows you to attach the USB power supply to your preferred location in addition to the specified location.
(Can be mounted on Φ22.2, Φ25.4 bar handles)
・Power supply extraction harness type4
Simply insert the coupler into the designated coupler in the headlight case and connect the connector terminal.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.