- Helmets
- Helmet Locks
- BABYFACE
- BABYFACE - Helmet Locks
- Product list
- Helmet Lock
Helmet Lock
Product # 009-LCH11BK
24.78 USD (3,783 JPY)
List price: 25.96 USD Save 5%
+38 Webike point (0.24 USD)
Product # 009-LCH11BK
24.78 USD (3,783 JPY)
List price: 25.96 USD Save 5%
+38 Webike point (0.24 USD)
Model Page Links
4 / 5
98 reviews
Fits: HONDA CBR1000RR-R 20-23, HONDA CBR1000RR-R SP 20-23
It is easy to install, but please make sure that the lock part is on the front side of the vehicle.
If you don't, Helmet will hit Tandem Footpeg.
I think the lock part could stick out a little more.View Detail
Fits: HONDA CBR1000RR-R 20-23, HONDA CBR1000RR-R SP 20-23
I had my Helmet stolen in a certain ParkingArea, so…
The only thing I ask for is this product. Easy to install. However, some Helmet may not be able to catch the Hook. So I put an attachment to lock it.View Detail
Fits: HONDA CBR1000RR-R 20-23, HONDA CBR1000RR-R SP 20-23
important item
[Was there anything that disappointed you? The slide type lock makes it a little difficult to use as it is recessed in position.
Do you have any wishes or improvements you would like to make for the Manufacturer? I'd like to see the Hook type ones set up as well.
[Do you have any products to compare it to? None
Frequently Asked Items
What made you decide to buy? The early sale against New ModelMODEL
How was your experience with it? The slide type lock makes it a little difficult to use as it is recessed in position.
Was the installation difficult? No
[Was the Instruction Manual easy to understand? Yes
[Included Parts:were they on? Yes
View Detail
Fits: HONDA CBR1000RR-R 20-23, HONDA CBR1000RR-R SP 20-23
[Was there anything that disappointed you?
We knew from looking at the product images that the Helmet was going to be difficult to install
I have found the installation of the product to be very cautious and difficult, even when using it
More than that, when I actually installed the X-14
Helmet interfering with Billionfootpeg and Tandem Footpeg according to
I was very concerned about the scratches that could be made to the Helmet
It's a product that is installed in a way that makes it look like it could just slip out of your hand and fall off
The only thing that could damage the Helmet if you're not careful is the one thing that could damage it
I honestly don't think it's good for my mental health
I don't care if Helmet is scratched! If this is the case, it's not a problem
I don't think many people who buy a Motorcycle like the SC82 don't care about it Hmm..
To make it easier to install, there is a Helmet Anchor that is available on the market
As for the SC82, if you try to use the Helmet Anchor, there is no doubt that you will be able to use helmet hits the footpeg with a thud
I'm looking for ways to make effective use of this product
I don't really feel like using it as is
Do you have any wishes or improvements you would like to make for the Manufacturer?
I would like to see the shape of the HelmetBracket to make it easier to install
I want it to be possible to lock without having a keying device (Dial type, etc.)
I want you to consider the interference of the Helmet when it is actually installed
[Do you have any products to compare it to?
There is no other helmet holder for this type of car
There was no comparison, but after the installation of this product
We are considering a Dial-style Wire locketc
What made you decide to buy?
The helmet holder of the SC82 is located in the Tandem seat
If you install a single seat cowl, there will be no helmet holder It was
This was a problem for me when I was touring
This product was first sold as a Helmet Holder, so it was the first to be sold as a Helmet Holder
Purchased
How was your experience with it?
First impressions Very difficult to use It was
I'll make sure they don't steal it for now If you think it's just for the sake of it
My impression is that it's not a problem
The first thing I did was Neck to increase the number of Keys I had on hand
Since this is a Key less vehicle, it would be nice if you could make it a Dial type etc
It's a desire to be happy with less hassle
Also, the part of the Helmet that goes through the Bracket is very narrow
It is difficult to install the Helmet
You have to pull pretty hard on the Helmet side
I had a hard time reaching the lock part
Also, the rod that goes through the bracket will slide a little bit, and there will be a gap between them
I'm going to run a bracket through it
The moving side of the stick will open upward when viewed from the ground
It is difficult to hook and lock the HelmetBracket
I thought that if my hand slipped a bit, I might drop the Helmet
Was the installation difficult?
The installation itself was very easy
Remove the two bolts that are holding the Tandem Footpeg in place
The product is inserted between the body and the Tandem Footpeg and
Just tighten the two Bolts with the prescribed Torque
【Please tell me the installation point and hang】
To ensure that the Tandem Footpeg mounting angle is not Gap
First of all, Quantity:With the 2pc Bolts temporarily fixed
It's a good idea to tighten the Bolt while supporting the Tandem Footpeg at a normal angle
[Was the Instruction Manual easy to understand?
It wasn't a particularly helpful Instruction Manual, but it was
Since the installation method is more obvious than it looks in the first place, Parts
I didn't have to worry about it
If I had to choose, I'd say it's a vehicle-specific part
Multiple Patterns are listed in the Tightening Torque section
"A little longer" I felt that
[Included Parts:were they on?
The key cylinder body and the key for unlocking the door
It also includes an Instruction Manual, which is just a little bit of feeling, and a Sticker I did
[Others]
As for Matching to the body of the car, I think the design of the car is good because it doesn't look like it's floating and has a sense of unity I thought
If the key functional aspects of the product were excellent, I would have no complaints..View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
Notification
Please select option before add to your cart.
Customer Service
INFORMATION
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.