가벼운 접촉사고를 겪은 후에 눈여겨 보던 제품을 세일기간을 이용해서 구매했다.위바이크답게 꼼꼼하게 포장해서 보내왔고, 생각보다 큰 아머에 다소 놀랐지만 장착 후에 몽키125가 드레스업도 되고 또한 아머가드덕을 보는 일을 두번 겪어보니 구매하길 잘했단 생각이 든다.다소 비싼 가격이 아쉽긴 하지만 장착하길 잘했단 생각이 든다.망설이고 있다면 추천한다.
View Detail- Motorcycle Parts
- Handles & Control Parts
- Controls
- Hand / Knuckle Guards
- ZETA
- ZETA - Hand / Knuckle Guards
- Product list
- Adventure Armor Handguard














This picture was provided by our customers, which maybe similar but different product.
- Tariff-Free
・This option is not available.
・Please select other options.
76.95 ~ USD (11,721 JPY) 78.78 USD Save 2%
Delivery Information
-
Please select product form first.
Product detail
Old Part Number
F5354(ZE72-6021)
F5355(ZE72-6022)
[Components]
・Adventure Armor Handguard Unit
U Clamp Kit
Special Bar End Kit
[Material] Color anodized aluminum
[Specifications] With laser marking logo
**Optional bumpers and sliders (sold separately) can be installed.
*Fit image may include other colorings.
*There may be changes in product specifications due to the manufacturer's reasons..
[Specialized Handlebars Stock Handlebars Exclusive Design!!!]
Aluminum hand guard for Monkey 125.
High rigidity aluminum alloy is used to withstand off-road driving.
The handle clamps are specially designed to avoid interference from wires.
All models of armor handguard protector series (sold separately) can be attached.We also have windproof protector and LED flasher protector to customize to your needs.
Color anodized, with laser marking logo.
Compatible with ZETA Specialized handlebars / stock handlebars.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
MODEL PAGE LINKS
Delivery Informaton
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Fits:HONDA MONKEY125 19-21

Installed on: HONDA Monkey 125
Fits:HONDA MONKEY125 19-21

Installed on: HONDA Monkey 125
Excellent
Jul 30, 2024
너무 좋아요 만족합니다 세일기간에 저렴하게 잘구매 하였습니다 여러분들도 어서구매하세요 언젠가는 구매하실꺼니 빨리 세일할때 쟁여 놓으세요 ㅎ나의손을 보호해야 합니다 제타 제타 화이팅 아이 조아라 행복해라아라라 하하하라라하라라
View DetailFits:HONDA MONKEY125 19-21
Excellent
Sep 25, 2023
Zeta Handle Guard PurchaseDelivery is fast and good, and protection is excellent.The 10th time, everyone is satisfied.I would recommend it to others and buy some.Thank you.
View DetailFits:HONDA MONKEY125 19-21

Installed on: HONDA Monkey 125
Excellent
Nov 9, 2022
There was a Takegawa guard before, but it was changed to Zeta Handguard.It is certainly a strong protection because the aluminum bar covers the whole.
View DetailFits:HONDA MONKEY125 19-21
Excellent
May 6, 2022
MONKEY125Exclusive Design, inexpensive Chinese products bend when they rub, but Zita does not.
I installed it for these two reasons.
The condition of use is commuting.
The purpose is to protect the Lever since it will always bend when it is knocked over.
I like the fact that the price is cheaper than Universal Product.
By the way, I tried to guess if it could be attached to VTR250, but it is no good at all.
As for the installation, we tightened the Bolt with our fingers while positioning it, and found the position where the surfaces to be joined fit together.
Finally, the tool was tightened.
I think it is quite accurate because the surface threads are in contact even when tightened with the fingers.
Mine is attached to the Clutch Side without any problems as described above.
Brake Side had a 0.5mm gap somewhere and did not face, but it was distributed and tightened all over.
I don't know if it's a product error or Honda's error, but it could be due to the Handlebar being slightly distorted since it's been knocked over a few times and had a head-on collision with a deer.
Since it took a lot of tightening force to distort it at this time, I was able to recognize that it is a very hard Aluminum Alloy, and I was impressed that it is a product that can be used safely in a sense.
When the handlebar is turned to the left, the Accelerator Wire interferes with the Bracket (this is not a problem since the vehicle will not be driven in full lock position). (This is not a problem, since the Accelerator Wire will not be operated at full lock). This work is a pain in the ass, because the rubber to which the Clamp is attached is partially glued, so it is necessary to separate it by applying the blade of the cutter while turning it over.
Handlebar width is exactly the same dimension as OEM, so I don't see any problem with driving.
The appearance of the Hand Guard alone is inconspicuous, so it did not cause much discomfort.