I wanted a full under cowl and this one from A-Tech was the best looking one in my opinion. Installation was straightforward. I had it painted to match the factory color.
View Detail
310.88 ~ USD (45,114 JPY) 330.76 USD Save 6%
Webike Point: +451~ pt
(3.1 USD)
Delivery Information
-
Please select product form first.
Product detail
■Oil tray shape
**As to FRP (white / black) products
Many products are made by dividing production molds (molds necessary for manufacturing products) into separate sections, and resin burrs are unavoidably generated along the dividing lines of the production molds in the manufacturing process.
When the product is subjected to secondary processing, it is necessary to shave off the resin burrs, and because of this process, the gelcoat of the processed part may be shaved off at the same time.
FRP products have such processing marks, but A-TECH develops and sells them on the premise of painting, so they are not defective.
*The above information does not apply to painted (PT), wet, and dry carbon FRP products.
*The image shows material: It is made of twill weave dry carbon.
*The stock center stand cannot be installed.
*A-Tech has not yet confirmed whether or not exhausts from other manufacturers (other than stock) can be installed or whether or not additional work is required, so they provide the unmodified products to customers.
*If the product interferes with the exhaust, please modify it by yourself.
*The product is made to order and cannot be cancelled or returned after the order has been placed.
*No cancellations, returns, or exchanges after an order has been placed.
*There may be changes in product specifications due to the manufacturer's reasons.
.
[Install the Under Cowl SPL to the bracket after attaching the installation bracket to the vehicle body.
It is compatible with the stock exhaust and can be used with the side stand.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Fits:KAWASAKI Z900RS 18-24
Installed on: KAWASAKI Z900RS
Fits:KAWASAKI Z900RS 18-24
Installed on: KAWASAKI Z900RS CAFE
May 24, 2022
Bellypan is very good quality, it's very easy to fit.Best to buy it already sprayed in the correct colour as Kawasaki do not tell you the colour code.
View Detail
Helpful?
Fits:KAWASAKI Z900RS 18-24
Installed on: KAWASAKI Z900RS
Apr 20, 2022
z900rs 21년식 에보니 컬러 순정머플러 차량 장착 후기입니다우선 구성품은 언더카울 방열스티커? 에이테크스티커 설명서 볼트류들이 전부입니다설명서에 사진과 설명이 있지만 사진이 약간 더 자세히 나와있으면 더 좋앗을꺼 같습니다작업시간은 30분 정도라고 명시 되어잇지만 처음으로 자가설치를 해서그런지 둘이서 2시간 조금 안되게 걸렷습니다그 이유는 제품이 순정대응임에도 불구하고 조금씩 구멍이 잘 안맞아서 볼트를 체결햇다가 풀엇다가 햇으며 순정 중통이 언더카울과 너무 딱 붙어잇어서 구성품에 포함되어있던 방열스티커를 붙이느라 다시 해체햇다가 달앗다가를 반복햇습니다 그 이외에는 구멍을 맞추느라 조금씩 애를먹엇지만 그래도 별도의 가공은 따로 하지않고 장착햇습니다 장착을 하니 확실히 더욱더 꽉찬 모습이 확실이 이쁘고 마음에 들긴합니다다만 다음 엔진오일 교체주기에 또 다시 풀고 장착할 생각을 하니막막하기도합니다 이상입니다,,,,,,This is a review of z900rs 21 year old ebony color genuine muffler vehicle installation.First of all, what is the under cowl heat dissipation sticker? A-tech sticker manual bolts are allThere are pictures and descriptions in the manual, but it would be better if the pictures were a little more detailed.It is stated that the working time is about 30 minutes, but it took less than 2 hours with two people because it was the first time I installed it myself.The reason is that, despite the fact that the product is genuine, the holes did not fit well, so I tightened the bolts and then loosened them. I repeated the adda. Other than that, I had a little trouble aligning the holes, but I installed it without any additional processing.When I put it on, it definitely looks more full, it's pretty and I like it.However, I am thinking of unscrewing it and installing it again at the next engine oil change interval.It's hard, it's more than that,,,,,,
View DetailHelpful?
Fits:KAWASAKI Z900RS 18-24
Mar 21, 2022
A little modification was required for installation.
It is not a problem if the exhaust pipe, intermediate pipe, or silencer is customized and needs to be cut down, but it is necessary to cut down the STANDReverse side because it interferes with the installation of the STANDReverse side. Why?" I thought
The paint job was quite large and odd because of the large area. Considering the finish and the time and effort required, I thought it would have been better to use painted products or carbon, so if you are not confident about self-painting, I recommend that you use that method.
I like the shape, but I guess that depends on your taste.
The Swing Arm with Stubby OVER is in good condition without Limit interference.
Helpful?
New Custom Articles
Fadi
Looks great. Which type you got so you were able to paint. Did you get plain white one or black? I want to paint it too but not sure which one to order. Thanks
8 months ago