Grip Heater GH10 with Built-In Switch Grip Length 120mm

The GH10 series of grip heaters has a new and more advanced product with a grip length of 120mm for 22.2mm diameter handlebars!
The integrated design with the temperature control switch set in the left hand grip allows you to adjust the temperature without taking your hands off the handle for direct operation!
The integrated design of the grip and the switch does not take up any switch space and can make the area around the handle look neat!
The LED indicator glows in five different colors to let you know the grip temperature!It is easy to check while you are driving because it tells you the five temperature adjustments by emitting blue, green, yellow, orange and red light!
The shape of the bar end cap is compatible with both bar endless and with bar end condition, so you can use your favorite bar end!
As a result of further pursuit for easy grip, the more thinner one than KIJIMA GH07 series has been developed with the diameter 32mm!
The kit comes with 3 types of reconfigurable throttle adapter parts for use with a wide range of vehicles, and the throttle tube is pre-installed so you can keep your stock grips.
The digital pulse type switch mounted on the main unit converts the switching interval at high speed and controls the voltage, so when the voltage becomes low during use, the power supply is cut to reduce the burden on the battery, and when the engine is started, the health of the battery is automatically checked to reduce the waste of electricity and protect the life of the battery.
Heaters are built into the entire circumference of the grip, so heat is transmitted to all the capillaries in your palm!

GOGO!Fall and winter bike riding!!! Report on the enthusiastic ride in the cold season!!!!
In the fall and winter when the temperature drops, touring with your beloved vehicle in the cold weather, motorcycle commuting, homecoming, every riders may think all of them are cold and severe for human beings, but if you turn your attention to your beloved motorcycle, in the fall and winter when the weather is clear, "(1) the outside temperature is low," "(2) there is little moisture," "(3) if there is no snow on the plain, the road surface is dry. If you're not into sport riding and high performance operation, it's a good season for bikes, vehicles, and internal combustion engines that are designed to be warmed up.
It's a shame that only such riders feel that "if only it were warmer..." or "if only it were a little sunny..." and don't ride, polish, maintain, or hibernate their bikes!
With a little ingenuity, riders can ride with their beloved vehicle from Hokkaido, Russia to the Eurasian continent!New discoveries that you can only see and notice in the fall and winter are waiting for you!
You don't have to be so passionate, but it's good for your immune system and health if you expose yourself to the outside air once in a while instead of just staying in a heated house. Walking is good, but if you have a bike, it's refreshing to get away while there's still daylight.
In addition, capillaries are flowing in the palm of the hand and fingers, which are warmed by the grip heater, and the body temperature is adjusted by radiating and absorbing heat from the blood circulating in the human body.
The reason why your fingers get sore and cold when you ride a motorcycle in the fall and winter is because you can't absorb heat and your fingers can't bend and your body temperature drops.
The finger is a part of the human body that can never be replaced, as if it were a super high-performance radiator.
If you use a grip heater to heat up your fingers, which are said to be the part of the body that gets cold the most, it will alleviate the drop in body temperature to a certain extent and delay the negative impression of "cold and pain" in your brain, so you can end the day with a good mindset of "it was fun" during the fall and winter touring!
If you use it with a handlebar cover from outside the company, you can get the much warmth.

[List of useful parts for grip heater installation]
・30019 (GRIP-IT Heat-Resistant Grip-Bond 0.5oz (14.2g))
・201-597 (Grip spacer 26 x 50mm x 5t 2pcs set)
・201-5971 (Grip spacer rubber 26 x 45mm x 3t 2pcs set)
・201-5972 (Grip spacer rubber 26 x 45mm x 5t 2pcs set)
・304-7141 (Harness ACC Split KIT 110 Type 2P Cygnus X (SE44J))
・304-7142 (Harness ACC Split KIT HM090 Type 2P Honda OP Wire Harness Connector 2)
・304-7143 (Harness ACC Split KIT HM090 Type 4P Honda OP Wire Harness Connector 1)
・304-7144 (Harness ACC Split KIT 110 Type 3P Yamaha)
・304-7145 (Harness ACC Split KIT 110 Type 4P Suzuki)
・304-7148 (Harness ACC Split KIT Waterproof MT090 IL 2P)
・304-7149 (Harness ACC Split KIT 250 Flat 4P)
・304-7150 (Harness ACC Split KIT Waterproof AL 2P)
・304-7151 (Harness ACC Split KIT Non-waterproof SMHM090 2P)
・304-7152 (Harness ACC Split KIT Waterproof TS090 2P)
・304-7153 (Harness ACC Split KIT Brake Switch 187 Flat)
・304-7021 (Housing: Bipolar 110 Fasten Terminal)
・304-7022 (Housing: 4 pole 110 Fasten Terminal)
・304-7147 (Wire Harness Connector SET HM090 4P Male / Female / Terminal 1SET)
・304-7130 (Waterproof Wire Harness Connector SET HM090 2P Male / Female / Terminal 1SET)
・304-7131 (Waterproof Wire Harness Connector SET HM090 3P Male / Female / Terminal 1SET)
・304-7132 (Waterproof Wire Harness Connector SET HM090 4P Male / Female / Terminal 1SET)
・304-7146 (Waterproof Wire Harness Connector SET MT090 3P Male / Female / Terminal 1SET)
・304-7050 (CONVERSION HARNESS HONDA male - female x 2 AV1.25 2pcs SET)
・304-7133 (Conversion Harness Female W / Male Bullet 110mm (cord 70mm) Red)
・304-7134 (Conversion Harness Female W / Male Bullet 110mm (cord 70mm) Black)
・304-7135 (Conversion Harness Female W / Male Bullet 110mm (cord 70mm) Yellow)
・304-7120 (Flat Terminal SET 250 L Male, Female, Sleeve 5 pcs SET)
・304-7121 (Flat Terminal SET 185 M Male, Female, Sleeved 5 pcs SET)
・304-7122 (Flat Terminal SET 110 S Male, Female, Sleeved 5 pcs SET)
・304-7042 (Fork Terminal Set, for M6, Sleeved, 5-piece set)
・304-7124 (Round Terminal SET for M6, Sleeved, 6 pcs set)
・304-7125 (Bullet Terminal SET, Female W, Sleeved, 2 pcs SET)
・304-7126 (Bullet Terminal SET, Male, Female, Sleeved, 8 pcs set)
・304-7127 (Bullet Terminal SET, Male, Female, Sleeved, 20 pcs SET)
・304-7136 (Bullet Terminal SET, for HONDA, Male, Sleeved, 8 pcs set)
・303-1320 (Protect mesh 7.0-16.0 x 1500mm)
・303-1321 (Protect mesh 10.0-28.0 x 1000mm)
・303-1322 (Protect mesh 13.0-33.0 x 1000mm)
・303-1323 (Protect mesh 19.0-40.0 x 500mm)
・303-1324 (Stock Mesh Tube 3.2-9.5 x 2000mm)
・303-1325 (Self-wrapping Sleeve inner diameter 5mm (opening 29) x 1000mm)
・303-1326 (Self-wrapping Sleeve inner diameter 8mm (opening 45) x 1000mm)
・303-1327 (Self-wrapping Sleeve inner diameter 13mm (opening 68) x 1000mm)
・303-1328 (Self-wrapping Sleeve inner diameter 16mm (opening 75) x 1000mm)
・303-1329 (Self-wrapping Sleeve inner diameter 19mm (opening 95) x 1000mm)
・BM-04001 (Grip Shrink Tube Black / Φ40 x L104)
・BM-04002 (Grip Shrink Tube Red / Φ40 x L104)
・BM-04003 (Grip Shrink Tube Blue / Φ40 x L104)
・BM-04004 (Grip Shrink Tube Yellow / Φ40 x L104)
・BM-04005 (Grip Shrink Tube Green / Φ40 x L104 11)
・304-7201 (Wiring Cover S 7 x 21 x 70mm)
・304-7202 (Wiring Cover M 12 x 32 x 100mm)
・304-7203 (Wiring Cover L 22 x 52 x 120mm)