Aluminum Body has good texture.
With this quality, the price of just a little over 10,000 yen for two pieces is also very pleasing.
I replaced 4 of them at the same time and the Timing does not gap and flows nicely.
Plug receptacle is Quantity:Set is also helpful, and the Instruction Manual has a This is a Safety Standard Corresponding Product. and it is well written, so I think it will be fine for vehicle inspection.
I attached it to KATANA, but since it is originally an LED blinker, I thought it would work just by replacing it, but it still does not light up as it is.
I had to put up resistance.
93.06 USD (14,428 JPY)
Webike Point: +144 pt
(0.92 USD)
Delivery Information
This item is discontinued.
Product detail
[Quantity / Component]
2 blinker bodies, mounting nuts and crimp, instruction manual
[Color / Material]
Black Body / Smoke Lens
Body material: Made of die-cast aluminum
[Weight / Capacity]
Power consumption per unit: 12V1.4W
[Size]
Screw diameter M8 x screw length under neck 20mm x P1.25
Blinker height 15mm x Blinker width 75mm (lens part 53mm inside) x Blinker depth 29mm
*
*This product requires a certain level of skill to formulate the installation point and method, Some vehicles may need to replace the stock blinker relay with a KIJIMA IC relay due to insufficient capacity. If you have any questions, please contact a professional shop or a vehicle dealer..
244ec42d7d6d26b413ec55f6a1aba8af2 ja 』『日々の暮らしのパートナー』 en A Partner for Everyday Life"
The long-awaited sequential winglets type is now available in the KIJIMA LED blinker series!
Motorcycles are less conspicuous than cars when changing course, so they need to be visible to drivers.
The sequential blinkers are 10 times more visible than the conventional ones.
The black color and winglet-shaped die-cast body give the bike a compact and slim impression that will make riders want to "get out there and ride".
The "Wedge X GP DESIGN" wedge-shaped aeroform gives your machine a race-like look!
E mark: 50R-000192 certified and engraved on the lens surface!
-The list of universal-purpose IC blinker relays required for an installation of sequential blinkers-
Compatible with Bulb / LED 50W for 304-052 IC Blinker Relay DC12V
50W 2 Poles for 304-0526 IC Blinker Relay DC12V
12V 0.05-10A for 304-0533 IC Blinker Relay SUZUKI 7P
50W 3 Poles Coupler for 304-0536 IC Blinker Relay DC12V
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
NEW ARRIVALS IN USED PARTS FOR
New arrivals in used
New arrivals in used
Customer Reviews
Reviews with image
Jul 17, 2022
Helpful?
Jun 28, 2021
I bought this because I like the Aluminum body.
I was looking for a small, high quality blinker to replace my OEM Parenthesis bad blinker, and I found this product. There are similar cheap LED Blinkers on other shopping sites, but they are often disappointing when you look closely at the uneven LED alignment. So I chose this product.
【good point】
The quality is high after all because it is an aluminum body as I expected. It is not something that I touch frequently, but I feel good somehow. In addition, because it is a gold genus, it should be strong in the aging deterioration than the plastic.
I think it's also good that the black body can be matched with any motorcycle.
The LED's are aligned beautifully.
It's so bright! It's much brighter than the previous Blinker even though it's smaller.
[Bad point]
The two bulbs on the Left Side rarely light up. I'm a little worried about getting them replaced.
I wanted to have both flowing type and non-flowing type. (The flowing type is good, but I personally wanted the non-flowing type.
This is Exactly for those who are looking for a high quality LED Blinker!
Helpful?
Mar 15, 2021
I installed this kit at the same time as the Fender Eliminator Kit.
Design is Sharp and Stylish.
The flow is beautiful and the visibility is good.
Recommended
Helpful?
Feb 20, 2021
I installed it in my ZX-10R with Fender Eliminator. I am satisfied with the design, texture and light emission.
But when I ran in Circuit, the root was damaged. Fortunately, it did not fall off, but it was a close call.
Circuit use may be harsh, but it's not cheap Chinese food.
I think it is too poor for a product of this price to be damaged after one frame of driving.
Helpful?
Aug 8, 2020
It's very bright and flows beautifully.
I bought the Z900 with the intention of making it a sequential blinker.
There are similar products available from various manufacturers, but we chose this one based on the overall price and shape.
Size is smaller than I expected, so it gives me a Refreshing impression.
What about the flatness at first? I thought it was a good idea, but I don't mind because I'll get used to it, surprisingly.
Very easy to install.
The Bullet Type Terminal that is crimped from the beginning is the Male side (3.5mm) and is a thin type.
A 3.5mm female side 3.5mm connector is included, so if it doesn't fit on the female side, you will need to replace it.
The smooth flowing movement is very cool.
I'm very happy with this product for both Front and Rear and it has a sharp look.
I feel like the price could be a little cheaper.
Helpful?
New Custom Articles
