The OEM products are still expensive, but the quality is good too!
Durability is unknown, but hopefully it'll last five years
Best Match for XL1200C SPORTSTER 1200, front and back are also easy to understand
122.57 USD (18,558 JPY)
Delivery Information
This item is discontinued.
FITMENT
-
VT400S
-
VT750S
-
SHADOW Custom
-
SHADOW400
See all
HONDA
-
Bolt
cafe
-
Bolt
-
DRAGSTAR1100
DS1100
-
DRAGSTAR400
DS400
See all
YAMAHA
-
BOULEVARDS50(INTRUDER800,VS800GL)
-
DESPELADO800(MARAUDER800/VZ800)
-
INTRUDER1400
-
INTRUDER400
See all
SUZUKI
-
VULCAN1500
-
VULCAN1600
*Except NOMAD
-
VULCAN400
-
VULCAN800
See all
KAWASAKI
-
SPORTSTERFamily
-
SOFTAILFamily
-
DYNAFamily
-
R1200C
Product detail
[Manufacturer's part number] 90793-6437900
■For Cruiser (Medium / Large Cruiser (without windshield))
[Material]
・Special high-grade acrylic resin on Toray Tetoron ox yarn material
・Hard W coating with flame retardant
・Fluorinated water repellent finish
100% polyester
・Materials certified by the Japan Fire Retardant Association
**The image shows the BOLT with the side stand.
*The engine and exhaust are hot immediately after driving.Please use it after it cools down sufficiently because the motorcycle cover may melt.
*The fabric is waterproof and the sewing thread is water-repellent, but it is not completely waterproof, so the vehicle body may get wet depending on the amount of rain.
*Vinyl chloride windshield may be thermally deformed.Do not use this product in high temperature.
*In high winds, the wind may penetrate into the bike cover.Take sufficient care of the equipment, including the prevention of this product from falling over.
*This product is designed to be put on by turning the handle to the left.Right-handed drive lock vehicles will not be able to lock.
*It may not cover the ground surface of the tire depending on the shape of the vehicle.
*This product may not be compatible with some installation options..
With comfortable air ventilation.
Motorcycle cover made of flameproof material.
・Large three-dimensional ventilations on both sides allow moisture inside the cover to escape effectively.
・The processed flameproof material is used to prevent the flame from spreading in case of arson.
・The two-color cutout design makes it easy to identify the front and rear positions as putting over the vehicle.The adjustable cord allows you to easily and securely tighten from either the front or back.
・The original slit can be used for large locks.The front and rear wheels can be locked from above the body cover.
・The cover is fitted to the vehicle body with an adjustable cord to prevent flapping.