I replaced it because it is easy to Custom and if it works, even better.
I'm not sure if it's the brush or not, but I'd like to believe it had an effect.
I was able to install it without any problem, but for ADV150, the Tie Band with foot which stops the high voltage cord is not reusable and it is not set in Single Item. So I cut the band part and put another Tie Band through the hole.
- Sale
23.13 USD (3,502 JPY) 28.86 USD Save 20%
Delivery Information
-
Please select product form first.
FITMENT
-
LITTLE CUB
(FI)(AA01-4000001-)
-
MONKEY125
(JB02-1000001-)
-
MONKEY
(FI)(AB27-1900001-)
-
SUPER CUBC125
(JA48-1000001-)
See all
HONDA
Product detail
[Products tested for simultaneous installation]
・SP Takegawa FI-CON / FI-CON2 / FI-CON PLUS (various injection controllers)
・Super Multi-DN Meter, Medium LCD Speed & Tachometer
・D-type LCD Speed & Tachometer, Square LCD Meter
・Medium DN tachometer and Small DN tachometer
[Products that cannot be installed at the same time]
・Large LCD Alpha Speed & Tachometer
・Medium LCD Alpha Tachometer & Thermometer
・Electric tachometer (Blue LED / Black & Green / White & Black)
**Images may contain other colors.
*Ape50 (FI) (AC16-1600001- / AC18-1000001-) cannot be installed due to interference with the frame.
*This is not a part to compensate for the deterioration of the spark plug.
*Always use a spark plug in good condition.
*For injection vehicles only.Cannot be used for vehicles with carburetor.
*The meter will not work properly if the meter of [Product that cannot be installed at the same time] is installed at the same time.
*Depending on the lot, the product may be delivered with the old price and label with the old JAN code before the price change..
* The image is only for reference. The image shown may differ from the actual product.
This hyper ignition coil for injection vehicles increases the discharge voltage and provides excellent combustion efficiency.
The discharge voltage decreases as the engine revs higher, and depending on the deterioration of the plug cord and spark plug, the stock ignition coil may not be able to reach the required voltage, resulting in a loss of fire.
This Hyper Ignition Coil will improve the discharge voltage at all RPM range and will provide the best combustion condition from stock engine to vehicles with big bore kit.
It is easy to install because it only replaces the stock.
Can be installed with SP Takegawa's FI-CON / FI-CON2 / FI-CON PLUS (various injection controllers) at the same time.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.