Once you select the option, estimate delivery time will be displayed.
*Shipping date and Estimate time of arrival are not guarantee.
Once your orders are placed, we will check the stock of manufacturer and send you the confirmed Shipping time via e-mail.
Hole machining: Switch hole machined Type: EZ-FIT Plus Material (Material): Aluminum Specifications: 7mm up /19mm back Inner diameter: 14mm Handlebar diameter: 28.6, 22.2Φ Height: 82mm Width: 760mm Depth (pull): 169mm Aperture Angle: 24 degrees Standing angle: 50 degrees
*Z900RS CAFE is not compatible. *Not available for vehicles equipped with heated grips. *Frequent position adjustment of the stock handlebar may cause the riser side to be worn off and the handlebar may not be able to be fixed even after installation of this product.
*There may be changes in product specifications due to the manufacturer's reasons.
* The image is only for reference. The image shown may differ from the actual product.
Bolt-on handlebars for specific models The concept is "Japan Fit". In addition to the basic "a little up and down, a little forward and back" of the EZ-FIT BAR, the width and angle are also "a little adjustable". Due to the globalization of motorcycles, it is possible to optimize the position of the bike for ease of use in Japan, instead of being aimed at Europe and the United States.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
Because the STD Handlebar of Z900RS was quite wide, and I felt a little distant to me of 170cm in height, and there was also a hand becoming numb when I rode for more than 30 minutes, first of all, the Pipe Handlebar or the basis of Custom was cheap, and as a result of looking for various things, I decided on EFFEX I decided on the Easy fitting Plus of Mr. EFFEX. As for the installation, the hole of the switch fixation was also opened, and I was able to exchange it rather smoothly. However, it is necessary to exchange the Handlebar End because the OEM one is the type which is directly bolt fastening to Handlebar, and it is necessary to note that the Bar End for the inner diameter φ14.6 is necessary because I chose the Aluminum Bar. I chose the Aluminum Bar, so you need to use the Bar End for the 14.6 bar. There were various weights and weights for vibration prevention, but I stuck to the lightness first and put on Active's light and cheap parts. After replacing it, I got a good distance and height to ride, but my hands are still numb, but not as numb as before. I'd like to fine tune the angle again since the Indicator is Laser processed. By the way, BEET's Taper Handlebar (Black color) I also bought the Handlebar at about the same time, but I like the Handlebar now and it's still in the box.View Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!