Linkage Guard
Product # ZE55-4010
38.29 USD (5,795 JPY)
List price: 38.29 USD Save 0%
+58 Webike point (0.38 USD)
This item is discontinued. |
Product # ZE55-4010
38.29 USD (5,795 JPY)
List price: 38.29 USD Save 0%
+58 Webike point (0.38 USD)
This item is discontinued. |
Bolt On to a 2021 YZ250FX with ACERBIS Under Guard installed. No modifications have been made.
As you can see in the picture, it is cracked, but the LINK era is covered, so it is usable for now. It is a pity that it cracked in less than half a year.View Detail
I installed the Linkage Guard to provide peace of mind when touring on forest roads.
The SkidGuard is mounted by drilling holes in the SkidGuard, but we decided to top mount it in consideration of skidability.
There was little bend with the Linkage Guard and it was interfering with the LINK, so I had no choice but to bend and install the SkidGuard with PRESS.
Unfortunately, if there were a few more turns, we wouldn't have had to do the processing.
At any rate, I was able to successfully soak my current SkidGuard, and it looks like I will be able to do so successfully with the next SkidGuard.
The current SkidGuard has a terrible resonance noise and is heavy, so we plan to eventually change to a lighter Type.View Detail
I installed it on my YZ125X in combination with ZETA's Skid plate.
For installation, it is necessary to drill a hole of about 8mm in the skid plate.
In the case of the YZ125X, the position of both the Skid Plate and the Linkage Guard made by ZATA are not fixed exactly, so it is safer to think about the ease of future maintenance, and make sure that the holes are positioned sufficiently before drilling.
This time, in order to cover the entire LINK, I set the mounting hole to the side about 10?
The Linkage Guard Instruction Manual states that the front end of the Linkage Guard should be installed between the skid plate and the vehicle body or on the outside of the skid plate depending on the situation.
Initially, I was concerned about the front end of the Guard catching and tried to install it inside the skid plate, but with the combination of the YZ125X and these Guard made by ZETA, the Linkage Guard has a relatively flat shape and interferes strongly with the LINK, making it impossible! It was impossible.
The inside mounting is so tight that even the impact of a jump landing could crack the Guard.
I thought about bending it by heating it with a burner or heat gun, but the strength change by heat was unknown.
However, as you can see in the image, the LINK continues to interfere with the Tension there even when it is externalized.
Strictly speaking, it could be hindering the workability of LINK, but I couldn't feel it.
This may be unavoidable because it is a Universal Product, but I would like the Manufacturer to review the shape a little more, because I think quite a few Motorcycles will have the LINK lower than the Frame.
Product is Material:With Plastic, it is always interfering with the LINK and may not be as durable as a LINK-integrated Guard such as the FASTWAY if it is directly hit by a rock or Concrete Stir.
I would like to keep careful operation in mind and not be overconfident because of the Guard.
It's just that Material:It slides well with Plastic, so it is very easy to get out of the turtle state, such as a log Stir.
From the shape and material, I think the PartsConcept is to prevent the LINK from getting caught on the Stir, not to hit the GunGunStir.
By the way, in case of NORMALYZ125X, the top surface of Guard is always wet with Gasoline of Overflow from carburetor.
The Gasoline could go directly on the LINK and shed the Grease portion of the LINK, so I'll eventually make the Hose a little longer and let it go somewhere else.View Detail
It became possible to overcome Smooth without getting caught by LINK when crossing a log etc.. I think that Damage to LINK will also decrease.View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
Notification
Please select option before add to your cart.
Customer Service
INFORMATION
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.