*Because the link ratio changes, the suspension becomes softer for the low down type and harder for the high lift type.If necessary, readjust the front and rear suspension.Depending on the setup, the side stand may need to be modified. *Effect amount is for reference only.The measurement was taken at the vertical position of the rear axle under no load.
* The image is only for reference. The image shown may differ from the actual product.
Kits for changing the vehicle body posture of a motorcycle. By changing the seat height, link ratio, caster angle, etc., the optimum body posture can be achieved for the rider's physique and riding style. The amount of the low down type is designed to be the maximum while considering the off-road driving performance. The high lift type has a shorter wheelbase and a higher caster angle, which improves turning performance and traction. It is easy to install and replace with just two bolts. Available in fearless black.
Points of Attention
* If there may be an instruction manual included, it will be written in Japanese.
As the parts arrive, I will see first, the texture is normal. And compared with OEMLINK "Is it so short and Large sturdy?" I was born a question. For the time being, I started work, I left all Rear shock and LINK and managed to finish installing. Then what is it! Body which has risen much higher than + 20 mm written in the Instruction Manual! I measured it and it was about 50 mm higher.. Even if you look at Package and Motorcycle's LINK ??? which is different from that, there is a character conforming to CRM 250R It seems that I threw 6000 yen in the dob, I decided to consider it as a study fee.View Detail
Footing is slightly improved. Street driving is easier. The driving feel is unchanged, and the ride quality is almost the same. It is good because it is not noticeable when put on.View Detail
[How is it used? I bought this product so that even my short-legged uncle can feel safe when playing in the mountains.
Was the one you received as per Image? It looks sturdy with a thick steel Plate, just like Image.
Was the installation difficult? Quantity of Bolt & Nut:If you remove the 2 Set, you can easily remove the OEMLink Plate, and then install this product in the reverse order of removal, and you're done! However, let's implement Grease up because it is a good idea.
How was your experience with it? It was no more than a Bolt1 pc minute longer than the OEM Plate, so I'll be honest. It won't make much difference." I installed it like that................................... The footing has improved dramatically, but because the STAND is Standard Spec, the motorcycle stands up too much when stopped, and I'm afraid that the motorcycle will fall over when I take my eyes off it. Please sell Short Stand for KDX220SR by DRC.
[Included Parts:were they on? A very simple paper Instruction Manual is included in the package, but the process itself is simple enough that you shouldn't be confused. If you're still worried about DIY, ask your regular Shop or a friend who is good at machine work.
[Was there anything that disappointed you? Nothing in particular, because the effect can be confirmed firmly and the strength seems to be enough. It's going to last a long time
0Other items that may be useful include Point and hang of installation As I mentioned above, you can use Bolt and Nut as Quantity:2 SetThis is a very straightforward product to remove and replace. Just make sure you manage Torque.
[Availability and clarity of the Instruction Manual No Instruction Manual is available It is just a matter of replacing the two Plates. If you still don't get it, then you're either a straight up PRO or you're not. A friend. Let's ask the
[Notes/Items to be purchased together]. Adjust the balance in a timely manner by using the front fork protrusion etc. to match the rear.
[Opinions and requests to Manufacturer I would also like to see a Short Stand sold to go with the Lowdown Link.View Detail
As for the height, it goes up about 4-5cm. If you have a normal body type, I think it will be worse for your feet. The Rear is up, and the Caster happens, but it's just right for city use.View Detail
* The BEST and MUST store to find Japanese parts. * Register now for amazing deals and other special offers! *Over 800,000 listed items. It's hard NOT to find your parts.
SIGN IN TO WEBIKE JAPAN
Please enter email at least 6 characters.
Please enter a valid email address.
Email is already in use.
Your account has been banned.
Email address and/or password is not match.
Authentication with facebook fail.Please try again.
Please select How did you get to know about Webike Japan?
OR
YOUR ACCOUNT HAS BEEN CREATED!
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Get on your grid by register your motorcycle! About our "Mybike" service
"Easier to Search Items" It helps you to search items to fit for your motorcycle!
"Get Much Valuable Information" It helps you to get special deals, newly listed items and closeouts about your motorcycle!
"Easy to Register" It requires only your motorcycle manufacturer, model name and model year!